Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWF 01487W
Summary of Contents for Zanussi ZWF 01487W
- Page 1 User Manual GETTING STARTED? EASY. ZWF 01487W EN User Manual Washing Machine...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
Old hose sets must not be reused. • If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance •... -
Page 4: Product Description
• Do not touch the glass door while a programme • Disconnect the appliance from the mains is in operation. The glass can get hot. electrical and water supplies. • Cut off the mains electrical cable close to the SERVICE appliance and dispose of it. -
Page 5: Easy Start
EASY START CONTROL PANEL DESCRIPTION Quick Cottons Intensive Cotton Easy Iron Synthetics Options Rinse Only Delicates Drain & Spin Wool/Handwash Refresh 20min Finish At Spin Temp. Mixed Fabrics On/Off On / Off button (On/Off) Start/Pause touchpad Programme selection touchpad Options selection touchpad Display Temperature touchpad Spin selection touchpad... -
Page 6: Programme Chart
: Cold water indicator • : The alarm codes : The permanent extra rinse indicator • : The message of error C. The spin area: • : Programme is completed. • : The spin speed indicator : The door locked indicator •... - Page 7 Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed Mixed Fabrics 2 kg Special programme for cotton, synthetic and mixed 60°C - Cold 1200 rpm fabrics with light soil. In case of setting cold wash cycle make sure to use the detergent designed for low tempera- tures.
-
Page 8: Consumption Values
CONSUMPTION VALUES The data in this table are approximate. Different variables can affect the data: the quantity and type of laundry, the water and ambient temperature. At the start of the programme, the display shows the programme duration for the maxi- mum load capacity. - Page 9 OPTIONS Use this option for items with light soil or items to TEMPERATURE refresh. With this option you can change the default The related indicator comes on. temperature. INTENSIVE Indicator = cold water. The indicator of the set temperature comes on. With this option you can wash very soiled laundry.
-
Page 10: Before First Use
Use this option for persons allergic to detergents The related indicator comes on. and in areas where the water is soft. SETTINGS PERMANENT EXTRA RINSE This option stays active even when you With this option you can permanently have an extra switch off the appliance. -
Page 11: Daily Use
DAILY USE Compartment for liquid additives WARNING! Refer to Safety chapters. (fabric conditioner, starch). CAUTION! Do not LOADING THE LAUNDRY exceed the MAX Open the water tap. Connect the mains plug to the level. mains socket. 1. Pull the door handle to open the appliance Flap for powder or liquid deter- door. -
Page 12: Activating The Appliance
STARTING A PROGRAMME WITH THE When the flap is in posi- tion B and you want to FINISH AT OPTION use powder detergent: Check if the appliance has the correct hour set. 1. Remove the drawer. See in "Clock setting" how to set the appliances's 2. - Page 13 The washing programme is completed, but If you change any option the option (if set) there is water in the drum: will be disabled. • The drum turns regularly to prevent the creases 3. Touch again. in the laundry. The programme continues. •...
-
Page 14: Hints And Tips
HINTS AND TIPS THE LAUNDRY LOAD – powder detergents for all types of fabric, – powder detergents for delicate fabrics (40 • Divide the laundry in: white, coloured, °C max) and woollens, synthetics, delicates and wool. – liquid detergents, preferably for low •... - Page 15 • Select the cotton programme with the highest Regularly examine the drum to prevent limescale temperature with a small quantity of detergent. and rust particles. To remove rust particles use only special products DOOR SEAL for washing machines. Do this separately from the Regularly examine the laundry wash.
-
Page 16: Troubleshooting
3. Remove the drain hose from the rear support 5. When no more water flows, install the inlet and unhook it from sink or spigot. hose and the drain hose again. 4. Put the ends of the drain and inlet hose in a WARNING! Make sure that the container. -
Page 17: Possible Failures
POSSIBLE FAILURES Problem Possible solution The programme does not • Make sure that the mains plug is connected to the mains socket. start. • Make sure that the appliance door is closed. • Make sure that there is not a damaged fuse in the fuse box. •... -
Page 18: Technical Data
Problem Possible solution The appliance fills with wa- • Make sure that the drain hose is in the correct position. The end of ter and drain immediately. the hose may be too low. Refer to 'Installation instruction'. The cycle is shorter than •... - Page 19 the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
- Page 20 WWW.ZANUSSI.COM/SHOP...