Health and Safety guide SAFETY INSTRUCTIONS IMPORTANT: TO BE READ AND RESPECTED This symbol is used to remind you to read this manual . Before using the appliance damage and electric shock Never open the door forcibly carefully read Health and resulting from improper use of or use it as a step .
Page 6
the manufacturer’s instructions When installing the appliance Do not stop the appliance until and local safety regulations . Do make sure that the four feet are the drying cycle has been not repair or replace any part stable and resting on the floor, completed;if this should be of the appliance unless adjusting them as required,...
Page 7
ELECTRICAL CONNECTIONS Socket outlet / plug (valid for corresponds to that of your FOR GREAT BRITAIN AND both countries) home . IRELAND ONLY For installation to comply with If the fitted plug is not suitable current safety regulations, an for your socket outlet, contact Fuse replacement omnipolar switch with Customer Support for further...
SAFEGUARDING THE ENVIRONMENT DISPOSAL OF PACKAGING This appliance is marked in Always select the correct MATERIALS compliance with European programme/drying time for the Directive 2012/19/EU, Waste load in order to obtain the The packaging material is 100% Electrical and Electronic desired drying results .
DECLARATION OF CONFORMITY “This appliance has been designed, constructed and distributed in compliance with the safety requirements of European Directives : -2006/95/EC Low Voltage Directive -2004/108/EC Electromagnetic Compatibility Directive” .
DETERGENT DISPENSER Prewash Compartment • Detergent for prewash Main Wash Compartment • Detergent for the main wash • Stain remover • Water softener Softener compartment • Softener • Liquid starch Pour softener or starch solution into the compartment without exceeding the “max”...
TECHNICAL SPECIFICATIONS FOR THE WATER CONNECTION INPUT WATER Cold WATER TAP Threaded attachment for 3/4" flexible hose MINIMUM WATER INTAKE PRESSURE 100 kPa (1 bar) MAXIMUM WATER INTAKE PRESSURE 1000 kPa (10 bar) DOOR To open the door, pull the handle . To close the door, push on the handle until it clicks .
HOW TO USE THE APPLIANCE FIRST TIME USE Remove any manufacturing debris: • Start the programme without loading the washer dryer machine (with empty drum) . • Select the “Cotton” programme with a temperature setting of 90 °C . • Pour a small quantity of detergent powder into the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity the detergent...
HOW TO USE THE WASHER DRYER 1 . LOADING LAUNDRY . Select the type of drying desired, by • Prepare the laundry, following the pressing the “Dryness level” button for recommendations given in the section automatic drying levels or the «Drying time»...
Page 15
2 . Press button “Dry only” to dry without a wash 8 . CANCELLING A RUNNING PROGRAMME (IF cycle . NECESSARY) 3 . Select the type of drying desired, by pressing Press and hold the button until the washer the “Dryness level” button for automatic dryer stops .
PROGRAMMES AND OPTIONS In order to select the most suitable programme for the type of load in question, refer to the instructions indicated on the garments' wash labels. PROGRAMME Wash type and recommendations Wash Settings symbols COTTON For washing normally to heavily soiled wash load 5 kg towels, underwear, table and bed linen...
Page 17
PROGRAMME Wash type and recommendations Wash Settings symbols Spins the load then empties the water . SPIN & DRAIN wash load 5 kg For resilient garments . drying load eMperaTure spin speed Start selecTable opTions Delay, Dry Only, Half spin RINSE &...
Page 18
The programme used for the evaluation of (WWDE 7512) under the mandatory Singapore Water Efficiency Labelling Scheme (WELS) and the recommended Washing Programme for soiled clothes is as follows: e cotton 60 °c...
FUNCTIONS ON/OFF To turn on the washer dryer: press To shut off the washer dryer at the end of the programme: this button until the Start/Pause button turns on . press the button until the lights turn off . To cancel a programme in progress: Press and hold the button until the washer dryer stops .
HINTS AND TIPS RULES FOR SEPARATING LAUNDRY • Fabric type / indications on label (cotton, mixed fibres, synthetic, wool, handwash items) • Colour (separate coloured garments from whites, wash new coloured items separately) • Size (wash items of different sizes in the same load to improve washing efficacy and weight distribution in the drum) • Delicates (place small items –...
ENERGY SAVING TIPS • Keeping within the load limits indicated in the • In order to save time and energy, be sure to programme chart will optimise energy, water, select a high spin speed in order to reduce the and detergent consumption, and will reduce amount of water remaining in the garments washing times .
CLEANING AND MAINTENANCE WARNING Never use flammable liquids to clean the washer dryer . Be sure to turn off the washer dryer and disconnect it from its electrical power supply before performing any cleaning or maintenance operations . CLEANING THE WASHER DRYER EXTERNALLY Clean the washer dryer's external parts using a soft Do not use generic detergents, glass detergents, damp cloth .
CHECKING THE WATER INTAKE HOSE Periodically check the integrity of the water intake hose . If it is found to be damaged, contact Customer Support or an authorised dealer in order to obtain a replacement hose . Based on the type of hose: For flood protection hoses: check the safety valve's inspection window (see the arrow) .
CLEANING THE FILTERS IN THE WATER INTAKE HOSE . Close the water tap and unscrew the intake hose . . Re-insert the mesh filter . Reconnect the intake hose to the water tap and the washer dryer . Do not use tools to connect the intake hose . Open the water tap and check to make sure that all the connections have been tightened properly .
CLEANING THE DETERGENT DISPENSER Remove the detergent dispenser by pressing Dry with a soft cloth . the release button and pulling on the dispenser at the same time . Re-install the detergent dispenser and close it . Remove the insert from the fabric softener compartment .
CLEANING THE WATER FILTER / DRAINING THE RESIDUAL WATER WARNING programme has recently been used, wait for the water to cool before draining it . The water filter should be cleaned regularly in Make sure that the washer dryer has been shut order to prevent water from remaining inside off and disconnected from its electrical power the appliance after wash cycles due to filter...
Page 27
Clean the water filter: remove any residues from the filter and wash it under running water . Insert the water filter and reinstall the kick panel: Re-insert the water filter by turning it clockwise . Turn it as far as it will go; the filter's grip should be in its vertical position .
TRANSPORT AND HANDLING WARNING Do not lift the washer dryer while holding onto its upper surface . Disconnect the electrical plug and close the water tap . Check to make sure that the door and the detergent dispenser are securely closed . Disconnect the intake hose from the water tap, then disconnect the drain hose .
TROUBLESHOOTING The washer dryer may sometimes not work properly for certain reasons . Before calling the Support Centre, it is recommended to check to see if the problem can be easily resolved using the following list . Anomalies: Possible causes / Solution: The washer dryer does not •...
Page 30
Too much foam is formed . • The detergent is not compatible with the washer dryer (it must bear the wording “for washing machines”, “ for hand washing and washing machines”, or something similar) . • The dosage was excessive. The washer dryer does not dry . •...
DOOR – HOW TO OPEN IT TO REMOVE THE LAUNDRY IN THE EVENT OF A MALFUNCTION Shut off the washer dryer and disconnect it Wait for the drum to come to a complete stop . from its electrical power supply . Close the If a high temperature program was selected, water tap .
For any repairs that may be required, please contact an authorised Customer Support Centre in order to ensure that the repairs are performed correctly using original spare parts . Manufacturer: Whirlpool Europe s .r .l . - Socio Unico Viale Guido Borghi 27 21025 Comerio (VA) Italy...