Xcommand Peripherals Heartbeat; Xcommand Peripherals List; Xcommand Peripherals Pairing Devicediscovery Start; Xcommand Peripherals Pairing Pair - Cisco TelePresence SX80 Reference Manual
Application programming interface (api)
Hide thumbs
Also See for TelePresence SX80:
- Reference manual (231 pages) ,
- Administrator's manual (183 pages) ,
- Installation manual (24 pages)
Table of Contents
Advertisement
Cisco TelePresence SX80
Introduction
xCommand Peripherals HeartBeat
When a peripheral is registered as a connected device, you can set it to send a heartbeat to the
codec to let the codec know that it is still connected.
This will keep the device on the xStatus Peripherals ConnectedDevice list. If the peripheral is
not set to send a heartbeat, the device will disappear from the list after a while.
Note: Does not apply to cameras.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand Peripherals HeartBeat ID: "ID" [Timeout: Timeout]
where
: String (1, 100)
ID
A unique ID for the device you are connecting to, typically a MAC address.
: Integer (1..65535)
Timeout
Set how long the device will send heartbeat.
xCommand Peripherals List
Lists all currently and previously connected peripherals.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand Peripherals List [Connected: Connected] [Type: Type]
where
: False/True
Connected
Limit the search to currently connected devices.
: All/ControlSystem/ISDNLink/Other/TouchPanel
Type
Limit the search by device type.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API
xConfiguration
xCommand
xCommand
xCommand Peripherals Pairing DeviceDiscovery Start
Start device discovery to detect ISDN Links in the same network.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing DeviceDiscovery Start [AutoPairing: AutoPairing]
[DeviceType: DeviceType] [Timeout: Timeout]
where
: On/Off
AutoPairing
You can select to automatically pair the detected device to the endpoint.
: ISDNLink
DeviceType
Only look for ISDN Link.
: Integer (3..60)
Timeout
Set a maximum time for the search from 3 to 60 seconds.
xCommand Peripherals Pairing Pair
Pair an ISDN Link to an endpoint.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Pair MacAddress: "MacAddress"
where
: String (1, 1450)
MacAddress
Enter the MAC address for the ISDN Link you wish to pair to the endpoint.
131
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
- Quick Links:
- Commands
- About Disconnect Cause Types
Hide quick links:
Advertisement
Chapters
Table of Contents
