Xconfiguration Network [1] Qos Diffserv Audio; Xconfiguration Network [1] Qos Diffserv Video - Cisco TelePresence SX80 Reference Manual
Application programming interface (api)
Hide thumbs
Also See for TelePresence SX80:
- Reference manual (231 pages) ,
- Administrator's manual (183 pages) ,
- Installation manual (24 pages)
Table of Contents
Advertisement
Cisco TelePresence SX80
Introduction
xConfiguration Network [1] QoS Diffserv Audio
This setting will only take effect if Network QoS Mode is set to Diffserv.
Define which priority Audio packets should have in the IP network.
The priority for the packets ranges from 0 to 63 - the higher the number, the higher the prior-
ity. The recommended class for Audio is CS4, which equals the decimal value 32. If in doubt,
contact your network administrator.
The priority set here might be overridden when packets are leaving the network controlled by
the local network administrator.
Requires user role: ADMIN, USER
Default value: 0
USAGE:
xConfiguration Network
n
QoS Diffserv Audio:
where
: Index that identifies the network. Range: 1..1
n
: Integer (0..63)
Audio
Set the priority of the audio packets in the IP network - the higher the number, the
higher the priority. The default value is 0 (best effort).
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API
xConfiguration
xConfiguration
Audio
xCommand
xConfiguration Network [1] QoS Diffserv Video
This setting will only take effect if Network QoS Mode is set to Diffserv.
Define which priority Video packets should have in the IP network. The packets on the
presentation channel (shared content) are also in the Video packet category. The priority for
the packets ranges from 0 to 63 - the higher the number, the higher the priority. The recom-
mended class for Video is CS4, which equals the decimal value 32. If in doubt, contact your
network administrator.
The priority set here might be overridden when packets are leaving the network controlled by
the local network administrator.
Requires user role: ADMIN, USER
Default value: 0
USAGE:
xConfiguration Network
n
QoS Diffserv Video:
where
: Index that identifies the network. Range: 1..1
n
: Integer (0..63)
Video
Set the priority of the video packets in the IP network - the higher the number, the
higher the priority. The default value is 0 (best effort).
61
API Reference Guide
xStatus
Appendices
Video
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
- Quick Links:
- Commands
- About Disconnect Cause Types
Hide quick links:
Advertisement
Chapters
Table of Contents
