Cisco Catalyst 3850 series Configuration Manual page 293
Ip multicast routing configuration guide
Hide thumbs
Also See for Catalyst 3850 series:
- Configuration manual (58 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Configuring SSM
Command or Action
Step 5
interface type number
Example:
Device(config)# interface gigabitethernet
1/0/0
Step 6
ip pim sparse-mode
Example:
Device(config-if)# ip pim sparse-mode
Step 7
Repeat Steps 1 through 6 on every interface that
uses IP multicast.
Step 8
ip igmp version 3
Example:
Device(config-if)# ip igmp version 3
Step 9
Repeat Step 8 on all host-facing interfaces.
Step 10
end
Example:
Device(config-if)# end
Step 11
show ip igmp groups [group-name |
group-address| interface-type interface-number]
[detail]
Example:
Device# show ip igmp groups
Step 12
show ip mroute
Example:
Device# show ip mroute
Related Topics
Prerequisites for Configuring SSM, on page 259
SSM Components Overview, on page 261
SSM with IGMPv3 Example, on page 280
OL-32598-01
Purpose
Selects an interface that is connected to hosts on which IGMPv3
can be enabled.
Enables PIM on an interface. You must use sparse mode.
--
Enables IGMPv3 on this interface. The default version of IGMP
is set to Version 2. Version 3 is required by SSM.
--
Ends the current configuration session and returns to privileged
EXEC mode.
(Optional) Displays the multicast groups having receivers that
are directly connected to the device and that were learned through
IGMP.
(Optional) Displays the contents of the IP mroute table.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
Configuring Source Specific Multicast
• A receiver must be active on the network at the time that
this command is issued in order for receiver information
to be present on the resulting display.
• This command displays whether a multicast group is
configured for SSM service or a source-specific host report
has been received.
269
- Quick Links:
- Prerequisites for Using the Web Gui
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
