Disabling Igmp Report Suppression (Cli) - Cisco Catalyst 3850 series Configuration Manual
Ip multicast routing configuration guide
Hide thumbs
Also See for Catalyst 3850 series:
- Configuration manual (58 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Configuring IGMP
Command or Action
Step 8
ip igmp snooping querier version version
Example:
Device(config)# ip igmp snooping querier
version 2
Step 9
end
Example:
Device(config)# end
Step 10
show ip igmp snooping vlan vlan-id
Example:
Device# show ip igmp snooping vlan 30
Step 11
copy running-config startup-config
Example:
Device# copy running-config startup-config
Disabling IGMP Report Suppression (CLI)
Follow these steps to disable IGMP report suppression:
SUMMARY STEPS
1. enable
2. configure terminal
3. no ip igmp snooping report-suppression
4. end
5. show ip igmp snooping
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
OL-32598-01
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
How to Configure IGMP Snooping
Purpose
(Optional) Selects the IGMP version number that the querier
feature uses. Select 1 or 2.
Returns to privileged EXEC mode.
(Optional) Verifies that the IGMP snooping querier is enabled
on the VLAN interface. The VLAN ID range is 1 to 1001
and 1006 to 4094.
(Optional) Saves your entries in the configuration file.
89
- Quick Links:
- Prerequisites for Using the Web Gui
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
