Request Filters - Cisco Catalyst 3850 series Configuration Manual
Ip multicast routing configuration guide
Hide thumbs
Also See for Catalyst 3850 series:
- Configuration manual (58 pages) ,
- Hardware installation manual (146 pages)
Table of Contents
Advertisement
Controlling the Response to Outgoing SA Request Messages from MSDP Peers Using SA Request Filters
Command or Action
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
ip msdp sa-request {peer-address | peer-name}
Example:
Device(config)# ip msdp sa-request 192.168.10.1
Step 4
Repeat Step 3 to specify that the device send SA request
messages to additional MSDP caching peers.
Step 5
exit
Example:
Device(config)# exit
Controlling the Response to Outgoing SA Request Messages from MSDP Peers
Using SA Request Filters
Perform this optional task to control the outgoing SA request messages that the device will honor from MSDP
peers.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip msdp filter-sa-request {peer-address | peer-name} [list access-list]
4. Repeat Step 3 to configure SA request filters for additional MSDP peers.
5. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
226
Purpose
Enters global configuration mode.
Specifies that the device send SA request messages
to the specified MSDP peer.
--
Exits global configuration mode and returns to
privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Configuring MSDP
OL-32598-01
- Quick Links:
- Prerequisites for Using the Web Gui
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
