Cisco 8861 Deployment Manual page 137
Wireless lan ip phone
Hide thumbs
Also See for 8861:
- Quick reference manual (3 pages) ,
- Quick manual (3 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
IPv6 Load Server
Wireless Headset Hookswitch
Control
Wideband Headset UI Control
Wideband Headset
Wi-Fi
Back USB Port
Side USB Port
Console Access
Bluetooth
Allow Bluetooth Contacts Import
Allow Bluetooth Mobile Handsfree
Mode
Bluetooth Profiles
Gratuitous ARP
Show All Calls On Primary Line
HTTPS Server
IPv6 Log Server
Cisco IP Phone 8861 and 8865 Wireless LAN Deployment Guide
reducing install times, particularly for upgrades over a WAN. Enter the hostname
or the IP address (using standard IP addressing format) of the server. The
indicated server must be running TFTP services and have the load file in the
TFTP path. If the load file is not found, the load will not install. The phone will
not be redirected to the TFTP server. If this field is left blank, the phone will use
the designated TFTP server to obtain its load files and upgrades.
Indicates that the phone will use an alternative IPv6 server to obtain firmware
loads and upgrades, rather than the defined TFTP server. This option enables you
to indicate a local IPv6 server to be used for firmware upgrades, which can assist
in reducing install times, particularly for upgrades over a WAN. Enter the
hostname or the IPv6 address (using standard IPv6 addressing format) of the
server. The indicated server must be running TFTP services and have the load file
in the TFTP path. If the load file is not found, the load will not install. The phone
will not be redirected to the TFTP server. If this field is left blank, the phone will
use the designated TFTP server to obtain its load files and upgrades.
Allows administrator to enable or disable Wireless Headset Hookswitch Control.
Allows users to enable or disable Wideband Headset option on phone UI.
Enable or disable the use of a Wideband Headset on the phone. Used in
conjunction with User Control Wideband Headset.
Indicates whether the Wi-Fi on the device is enabled or disabled.
Indicates whether the back usb port on the phone is enabled or disabled.
Indicates whether the side usb port on the phone is enabled or disabled.
Indicates whether the serial console is enabled or disabled.
Indicates whether the Bluetooth device on the phone is enabled or disabled.
Indicates whether the Bluetooth device on the phone is allowed to sync the
contacts from the phone.
Indicates whether the user is allowed to enable or disable 2 way audio between
devices with HFP.
Indicates which Bluetooth profiles on the phone are enabled or disabled.
Indicates whether the phone will learn MAC addresses from Gratuitous ARP
responses. Disabling the phones ability to accept Gratuitous ARP will prevent
applications, which use this mechanism for monitoring and recording of voice
streams from working. If monitoring capability is not desired, change this setting
to Disabled.
When enabled, indicates that all calls presented to this device will be shown when
the Primary line is selected.
Allows Administrator to permit http and https or https only connections if Web
Access is enabled.
Specifies an IPv6 address and port of a remote system where log messages are
sent. The format
is:[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:ppppp@@options. Options will
be format as base=x;pfs=y; base value range is 0~7,pfs value range is 0~1.And
137
Hide quick links:
Advertisement
Table of Contents
