Status Type Commands - Cisco TelePresence ISDN Link Reference Manual
Hide thumbs
Also See for TelePresence ISDN Link:
- Administrator's manual (27 pages) ,
- Administrator's manual (88 pages)
Table of Contents
Advertisement
Cisco TelePresence ISDN Link
Contents
Introduction
Description of the xStatus commands
The following pages will list an example of the xStatus commands and the response. Status
type commands returns information about the system and system processes. You can query all
information or just some of it.
We recommend you visit our web site regularly for updated versions of the manual.
Go to:
http://www.cisco.com/go/isdnlink-docs
Call status
ISDN Link operates as a gateway between a Caller and a Callee. Thus xStatus referring to
"Caller" is about the calling party or the connection between the calling party and the ISDN
Link. Similarly xStatus referring to "Callee" is about the called party or the connection between
the ISDN Link and the called party.
xStatus Call
Shows the top level overview of the call status. The call identity is used when querying for additional
information about the call.
Example:
xStatus Call
*s Call 20 Status: Active
*s Call 20 CallType: Video
*s Call 20 Duration: 2354
*s Call 20 Caller Status: Connected
*s Call 20 Caller Protocol: "SIP"
*s Call 20 Caller RemoteNumber: "firstname.lastname@company.com"
*s Call 20 Caller CallbackNumber: "firstname.lastname@company.com"
*s Call 20 Caller LocalNumber: "isdn-link1@company.com;x-h320number=1234"
*s Call 20 Caller TransmitCallRate: 768
*s Call 20 Caller ReceiveCallRate: 1920
*s Call 20 Caller Encryption Type: "Aes-128"
*s Call 20 Callee Status: Connected
*s Call 20 Callee Protocol: "H320"
*s Call 20 Callee RemoteNumber: "1234"
*s Call 20 Callee CallbackNumber: "1234"
*s Call 20 Callee LocalNumber: "5678"
*s Call 20 Callee TransmitCallRate: 1920
*s Call 20 Callee ReceiveCallRate: 768
*s Call 20 Callee Encryption Type: "None"
** end
D14953.01
ISDN Link API Reference Guide IL1.0 June 2012.
© 2012 Cisco Systems, Inc. All rights reserved.
About the API
xConfiguration
xStatus Call [1..n] Status
xStatus Call [1..n] CallType
xStatus Call [1..n] Duration
42
xCommand
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<Idle/Initializing/Accepted/Active/Disconnecting>
Example:
xStatus Call 20 Status
*s Call 20 Status: Active
** end
Shows the call type of the incoming or outgoing call. You can run the command xStatus Call to find
the call identity.
Value space of the result returned:
<Video/Audio>
Example:
xStatus Call 20 CallType
*s Call 20 CallType: Video
** end
Shows the duration of a call (in seconds). You can run the command xStatus Call to find the call
identity.
Value space of the result returned:
<Integer>
Example:
xStatus Call 20 Duration
*s Call 20 Duration: 2354
** end
API Reference Guide
xStatus
xStatus
Contact us
www.cisco.com
Advertisement
Table of Contents
