Shutdown - Cisco Catalyst 3750 Metro Command Reference Manual

Hide thumbs Also See for Catalyst 3750 Metro:

Table of Contents

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

shutdown

Use the shutdown interface configuration command to disable an interface. Use the no form of this

command to restart a disabled interface.

Syntax Description

This command has no arguments or keywords.

The interface is enabled by default.

Command Modes

Interface configuration

Command History

Usage Guidelines

The shutdown command for a port causes it to stop forwarding. You can enable the port with the no

shutdown command.

The no shutdown command has no effect if the port is a static-access port assigned to a VLAN that has

been deleted, suspended, or shut down. The port must first be a member of an active VLAN before it can

be re-enabled.

The shutdown command disables all functions on the specified interface.

This command also marks the interface as unavailable. To see if an interface is disabled, use the show

interfaces privileged EXEC command. An interface that has been shut down is shown as

administratively down in the display.

These examples show how to disable and re-enable a port:

Switch(config)# interface gigabitethernet1/0/2

Switch(config-if)# shutdown

Switch(config)# interface gigabitethernet1/0/2

Switch(config-if)# no shutdown

You can verify your settings by entering the show interfaces privileged EXEC command.

Related Commands

show interfaces

Modification

This command was introduced.

Displays the statistical information specific to all interfaces or to a specific

Catalyst 3750 Metro Switch Command Reference