hit counter script
GE Advisor MASTER ATS111 series Manager Manual
  1. Manuals
  2. Brands
  3. GE Manuals
  4. Control Panel
  5. Advisor MASTER ATS111 series
  6. Manager manual

GE Advisor MASTER ATS111 series Manager Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

GE
Security
ATS
Control Panel
Manager's manual
Version 2.1, 10/2006

Advertisement

Table of Contents
loading

Related Manuals for GE Advisor MASTER ATS111 series

Summary of Contents for GE Advisor MASTER ATS111 series

  • Page 1 Security Control Panel Manager's manual Version 2.1, 10/2006...
  • Page 2 Software license agreement GE software supplied with GE products is proprietary and furnished under license and can be used or copied only in accordance with the license terms. THE ENCLOSED PROGRAM IS FURNISHED SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.

  • Page 3: Table Of Contents

    Contents Welcome ................................5 How your system has been programmed? ......................5 The display text ...................................5 Testing the system................................5 The Advisor MASTER keypad...........................6 The ATS111x keypad.................................6 The ATS110x keypad.................................7 The LCD display...................................7 The LEDs....................................8 User identification............................10 Duress................................12 Door opening option............................13 Arming your system ............................15 Disarming your system ..........................17 Active zones (when arming) ..........................19 Types of alarms ...............................20...
  • Page 4 ATS Control Panel Manager's manual 22. Open doors..............................63 23. Unlock, lock, disable and enable doors ....................64 24. Print history ...............................65 Programming records ............................66 User record – Menu option 14........................67 Door group record – Menu option 20 ......................68 Floor group record – Menu option 20......................69 Holiday record –...

  • Page 5: Welcome

    Welcome This manual explains how to use the Advisor MASTER system if you are responsible for managing the system. There is also a shorter user guide available that explains every day usage. The Advisor MASTER panel combines sophisticated design with versatility, which makes it the leader in its field.

  • Page 6: The Advisor Master Keypad

    ATS Control Panel Manager's manual The Advisor MASTER keypad Figure 1. ATS111x keypad The ATS111x keypad • Displays system main power, system faults and alarm. System LEDs • Displays which areas are armed or in alarm. Area LEDs • Exits the current function. CLEAR •...

  • Page 7: The Ats110X Keypad

    Figure 2. ATS110x keypad The ATS110x keypad • Used to enter alphanumeric information. 0 - 9 • Used after entering your PIN code to tell the system that you want to arm your area(s). (Arming stations without LCD have a # as ON key) •...

  • Page 8: The Leds

    ATS Control Panel Manager's manual There Are No Alarms In This Area Code: In some instances there can be insufficient space to display all the text being presented (for example, a list of areas in your building): • If a complete list is displayed on line 1, there is a full stop at the end of the list. •...
  • Page 9 Comms Fail When there is a failure in the communications between THE Advisor MASTER control panel and a central station. RAS Fail When a remote arming station is offline. DGP Fail When a data gathering panel is offline. Battery Fail When the auxiliary battery power is found to be low.

  • Page 10: User Identification

    ATS Control Panel Manager's manual User identification All users of the Advisor MASTER system need PIN codes and/or cards. The PIN code has between four and nine digits and is unique for each user. It is a combination of numbers between 0 and 9. The PIN code and/or a card are programmed to let a user do specific tasks, such as arm or disarm the system.
  • Page 11 • A door group for a night shift worker may allow their PIN code to be used to open a door between 23:00 and 07:00 only. Using a PIN code When you enter your PIN code on the Advisor MASTER keypad, each key pressed is indicated by * on the display.

  • Page 12: Duress

    ATS Control Panel Manager's manual Duress The duress function activates a silent signal to alert security personnel. For example, if you are asked, under threat, to breach your system security (for example, forced to disarm the system), this function lets you do so while at the same time activating the system duress facility.

  • Page 13: Door Opening Option

    Door opening option An Advisor MASTER keypad, Card Reader or combination of both can be used to open a door by entering a door code or badging a card. Your door code is related to your PIN code. It varies, depending on whether your PIN code has been programmed to allow you to arm/disarm your system, as well as open doors.
  • Page 14 ATS Control Panel Manager's manual 3. In most systems with access control, an "Alarm Code Prefix" is used. The Alarm Code Prefix is the number of digits not to enter at the beginning of your full PIN code to make the door code and is programmed by the installer. For example. Alarm Code Prefix = 2 digits.

  • Page 15: Arming Your System

    Arming your system When to arm You arm your premises, or areas in it, when they are unoccupied. Then if an unwanted event occurs, such as someone forcing a door open, this sets off the alarm. The time limit when arming Once you have armed the system, you must leave the area within a preset time as otherwise you will set off the alarm.
  • Page 16 ATS Control Panel Manager's manual 0-All 1, Office 2, Boardroom 3, Workshop Enter Area: 5. You have four options: Option Action Result Arm all areas Press 0 and [ENTER] Arms all areas at once. Returns you to the original display. Arm individual areas Enter area number and press [ENTER].

  • Page 17: Disarming Your System

    Disarming your system When to disarm If the area you want to enter is armed, you must first disarm the alarm system before you can enter, otherwise you will set off the alarm. You will know which area is armed because its LED on the keypad will be lit red. If the screen saver is enabled, only the Mains LED will be lit.
  • Page 18 ATS Control Panel Manager's manual Option Action Result Disarms all areas at once. Returns you to Disarm all areas Press 0 and [ENTER] the original display. Disarm individual areas Enter area number and press [ENTER]. Disarms the selected area. If there are more armed areas, they will be displayed.

  • Page 19: Active Zones (When Arming)

    Active zones (when arming) You cannot arm (or disarm, if your system is programmed that way) an area unless all the zones in that area are normal, as an active zone would usually set off an alarm. For example, all the doors and windows must be closed.

  • Page 20: Types Of Alarms

    ATS Control Panel Manager's manual Types of alarms There are three types of alarms used in the Advisor MASTER system. 1. Local alarm 2. Alarm 3. System alarm Local alarm • It occurs when an area is occupied (that is, disarmed). For example, zones with 24 hour security have been activated: a fire door has been opened.
  • Page 21 2. Non-latching system alarms The system alarm resets automatically as soon as the condition causing the alarm has been rectified. The procedure to identify the system alarm details is the same as the procedure described to Identify "Alarms". In case of a system alarm in a system equipped with a voice module, the reporting of a system alarm can trigger the voice module to report an alarm message.

  • Page 22: What To Do When There Is An Alarm

    ATS Control Panel Manager's manual What to do when there is an alarm When there is an alarm, the LED of the area in alarm and the alarm LED flashes on the keypad. If the screen saver is active, the LEDs will start flashing when a user code has been entered). The time and date message is no longer displayed.

  • Page 23: Resetting A Zone In Alarm

    When a re-alarm does occur, the letter preceding the zone number will not be shown. Resetting a zone in alarm • The LED of the area in alarm flashes red on the keypad (if the screen saver is not active). •...

  • Page 24: Listing Past Alarm Events

    ATS Control Panel Manager's manual Listing past alarm events This list provides you with a quick alarm history. It is a fast and easy way to review where alarms have happened. This information is useful when you have had to reset an alarm without initially checking its cause. To list past alarm events 1.

  • Page 25: The Advisor Master Menu

    The Advisor MASTER menu The Advisor MASTER menu has 23 options available for performing various functions. Some of the functions are specific only to certain installations, while others might not be authorised to you. Therefore, you are unlikely to see all the menu options when you access the menu, but only those, which have been programmed to be available when your PIN code is used.
  • Page 26 ATS Control Panel Manager's manual Example: 10-Inhibit Zone 0-Exit, Menu:...

  • Page 27: Panel Status

    1. Panel status Use this function to list all zones that are in alarm, tamper alarm, inhibited or active and any system alarms. There are menu options available that display each of these conditions separately. However, this option can be used to check on all zones that need attention.

  • Page 28: Active Zones

    ATS Control Panel Manager's manual 2. Active Zones Use this function to list all active zones, for example, an open door. To list all active zones 1. Access menu option 2. What happens next depends on whether there are any active zones: No zones active Zones are active Active zones are listed either one at a time, or as a list of...

  • Page 29: Zones In Alarm

    3. Zones in alarm Use this function to list all zones that are in alarm. Alarms must be acknowledged and reset. To list all zones in alarm 1. Access menu option 3. What happens next depends on whether there are zones in alarm: No zones in alarm Zones are in alarm Zones in alarm are listed either one at a time, or as a list of...

  • Page 30: Inhibited Zones

    ATS Control Panel Manager's manual 4. Inhibited zones Use this function to list all inhibited zones. You inhibit a zone to exclude it from the security system when it is broken or faulty. This stops it causing an alarm. Use this function to determine which zones are not operating properly and need attention. To list all inhibited zones 1.

  • Page 31: History

    5. History Use this function to list past events of the system history, including alarms, access to the menu, etc. You can determine events such as the time that an alarm occurred, the time it was reset and who reset it, the time the system was disarmed in the morning, etc.
  • Page 32 ATS Control Panel Manager's manual *14:46 27/06 WARNING ATS Control Panel 16 CPU Restart 1-Sn, 8-Cm, 0-Ex The DVMRe will automatically enter the multiscreen view mode and a Search And Play command will be issued to the DVMRe displaying the recorded footage at the time of the event. The following RAS key will be mapped to DVMRe front panel keys allowing the user viewing the history to control the DVMRe.

  • Page 33: Test Report

    6. Test report Use this function to display the results of the Disarm Test or Arm Test. Disarm test report: The test results to see if specific zones and cameras are operating correctly. The zones need to be programmed to be included in the test, and operate when areas are disarmed. All cameras are tested.
  • Page 34 ATS Control Panel Manager's manual Option Action Display complete zone name Enter the zone number and press [ENTER] Update the list of zones and display the remaining Press [NEXT] zone (if any) If zone test report is displayed, display the camera Press [ENTER] test results (if applicable) Exit...

  • Page 35: Service Menu

    7. Service menu Use this function to allow the user to request a service call, establish a connection to a remote service centre in order to program over the telephone network, or test some system functions. There are ten options available. Table 1: Service menu options Option no.
  • Page 36 ATS Control Panel Manager's manual Option Procedure 1. Request service Press 1 and [ENTER]. The display shows: technician 1-Confirm Request Service Technician 0-Exit, Menu: The control panel then sends a "Service Requested" message to the central station. Then press: • 1 and [ENTER] to confirm request for service technician, or •...
  • Page 37 7. Siren test This option triggers the internal siren for three seconds followed by the external siren for three seconds and finally the flash for 10 seconds. Press 7 and [ENTER]. The display shows: 1- Confirm Siren Test 0-Exit, Menu: Then press: •...

  • Page 38: Film Counters

    ATS Control Panel Manager's manual 8. Film counters Use this function to display the current frame number position on each of the security camera films. If you maintain a log on frame counts, it will indicate whether the cameras have operated since they were last checked.

  • Page 39: List Zone Names

    9. List Zone names Use this function to display the zone names (text that describes the zones) in your system. To display the zone names. 1. Access menu option 9. The zones are listed either: One at a time Example: Zone 1, Rear Door Zone No: As a list of numbers...

  • Page 40: Inhibit Zone

    ATS Control Panel Manager's manual 10. Inhibit zone Use this function to inhibit zones and exclude them from the security system. A zone is inhibited when it is faulty or broken (that is, it is active). By inhibiting it, you prevent it causing an alarm until it is fixed. You can also inhibit normal zones if you know their zone number.

  • Page 41: Uninhibit Zone

    11. Uninhibit zone Use this function to uninhibit zones and include them again in the security system. Do not uninhibit a zone before checking the circumstances, as uninhibiting an active zone might cause an alarm. To uninhibit a zone 1. Access menu option 11. What happens next depends on whether or not there are inhibited zones.

  • Page 42: Test Zone

    ATS Control Panel Manager's manual 12. Test zone Use this function to test if an individual zone is operating correctly. To test a zone 1. Access menu option 12. The display shows: Test Individual Zone: Zone No: 2. Enter the zone number you want to test and press [ENTER], or press [ENTER] to exit and return to the menu.

  • Page 43: Start Auto Disarm Test

    13. Start auto Disarm test Use this function to start the disarm test. To start the disarm test 1. Access menu option 13. The display shows: Disarm Test, NEXT For Untested "0"-Cancel: 2. Press: • [NEXT] to display the untested zones, or •...
  • Page 44 ATS Control Panel Manager's manual The test is completed Test Completed Press ENTER The test is not completed Test Not completed Press ENTER 7. Press [ENTER] to return to the menu.

  • Page 45: Users

    14. Users Important: The option "Change own PIN only" is available. When this option is enabled, refer to the procedure below. If the option is disabled, refer to "Program Users". To change own PIN code 1. Press [MENU*]. The display shows: To Access Menu Enter Code Code: 2.
  • Page 46 ATS Control Panel Manager's manual • The control panel user (or card) number. This is a number between 1 and 65535 depending on the memory size (see exceptions below), which is used by the system to link a PIN code or card to the functions it will perform and the doors it can enter.
  • Page 47 1-Delete 2-Display 3-Create 4-Total 5-Card Learn Option: 4. Select the function you want to perform, or press [ENTER] to return to the menu. To enter the user menu if two users are required 1. Access menu option 14. If your system requires two users to access this option, the display shows: Enter Second Code Code: 2.
  • Page 48 ATS Control Panel Manager's manual The display shows the user’s alarm group. Example: *-View, Alm Grp:12,Forman Press ENTER 3. Press [ENTER]. The display shows the user's door group. Example: Door Group: 2 Press ENTER 4. Press [ENTER]. The display shows the user floor group. Example: Floor Group: 1 Press ENTER...
  • Page 49 To create (and change) a user The procedure to create a user may vary depending on whether you are creating a user higher than 200 or higher than 1000. 1. Access menu option 14 and press 3 to create a user. The display shows: Example: Create User...
  • Page 50 ATS Control Panel Manager's manual 7. If your system is programmed to assign special user flags to the users, the display now shows them in sequence. Table 2: The user flags: Two Cards If set to YES, the user will always require a second valid user code/card to be entered to perform any alarm or access control function at Doors 17 to 64.
  • Page 51 Example: YES – Card Only * - Change 0 - Skip Example: YES – Privileged * - Change 0 - Skip Example: YES –Extended Access * - Change 0 - Skip 8. If the user number that you are programming is higher than 1000, then all options available have been programmed and the display returns to step 1.
  • Page 52 ATS Control Panel Manager's manual reader (or keypad with reader) as being the Card Learn RAS. Cards being badged at that RAS will be stored in a History log. When programming users, this historical list can be used to assign a card number to a user. To learn this card information, the card has to be badged on the learn reader.
  • Page 53 6. A user who is allowed to both open doors and arm/disarm the system should have a PIN code of at least five digits (refer to the section on Opening a Door). Figure 3. Keypad layout for entering text ‘ "...

  • Page 54: Time And Date

    ATS Control Panel Manager's manual 15. Time and date Use this function to program a new time and date. The time and date can be visible on the display when no alarm, no fault condition is present or no special text is being programmed.
  • Page 55 The display shows: Time & Date hh:mm:ss dd/mm/yy Xxxday Month: 5. Enter the correct month (2 digits) and press [ENTER]. The display shows: Time & Date hh:mm:ss dd/mm/yy Xxxday Year: 6. Enter the correct year (2 digits) and press [ENTER]. The display shows: Time 16:41:22 09/03/2000 Thursday 0-Exit, Set-Enter...
  • Page 56 ATS Control Panel Manager's manual DST end at FIRST Sunday of the month DST end at SECOND Sunday of the month DST end on THIRD Sunday of the month DST end on FOURTH Sunday of the month DST end on LAST Sunday of the month 6.

  • Page 57: Inhibit/Uninhibit Ras/Dgp

    16. Inhibit/uninhibit RAS/DGP Use this function to inhibit remote arming stations (RASs) and data gathering panels (DGPs), i.e. exclude fault and tamper messages (system alarms) from a RAS or DGP to the security system. This function is used if a RAS or DGP has generated a system alarm, or is out of service, and needs to be inhibited while awaiting service.

  • Page 58: Enable / Disable Service Technician

    ATS Control Panel Manager's manual 17. Enable / disable service technician Use this function to enable and disable the service technician code. This option is to be used when a service technician or engineer can only gain access to the installer menu when this option is enabled by a user. To enable/disable the service technician code 1.

  • Page 59: Reset Cameras

    18. Reset cameras Use this function to reset the film frame count on a camera to zero, or to change the frame count number on an individual camera. This is done when you have changed the film in a camera. To reset the cameras 1.

  • Page 60: Door And Floor Groups

    ATS Control Panel Manager's manual 20. Door and Floor groups Use this function to select and program door and floor groups. Each door group contains a list of all doors (64 doors) and the timezone for each door within the group. Each floor group contains a list of all floors (64 floors) and the timezone for each floor within the group.
  • Page 61 Floor groups (if you selected option number 2) 1. The display shows: Floor Groups Group No: Enter the floor group number and press [ENTER] to move to the next display, or press only [ENTER] to return to the initial display ("Groups, 1-Doors 2-Floors"). 2.

  • Page 62: Holidays

    ATS Control Panel Manager's manual 21. Holidays Use this function to record the date of holidays. The holidays recorded here can be used in conjunction with timezones to control access, for example, staff who are allowed access during normal weekdays can be denied access on weekdays declared a holiday.

  • Page 63: Open Doors

    22. Open doors Use this function to open a valid door via the LCD arming station. To open a door via the arming station 1. Access menu option 22. The display shows: Open Door Door No: 2. Enter the number of the door you want to open and press [ENTER], or press only [ENTER] to return to the menu.

  • Page 64: Unlock, Lock, Disable And Enable Doors

    ATS Control Panel Manager's manual 23. Unlock, lock, disable and enable doors Use this function to unlock, lock disable and enable a valid door via the LCD arming station. The function can only be used with door numbers 17 to 64. I.e. doors controlled by four-door DGPs. The door remains in the state selected until an opposite event occurs in the system that will change the state of that door, for example, Door 21 automatically unlocks at 08:00H and relocks at 17:00H (using an "Override Timezone").

  • Page 65: Print History

    24. Print history Use this function to instruct the control panel to print the complete system history from when the last print history command was issued (maximum 200 events with standard memory or 2000 events with expanded memory). To print complete system history 1.

  • Page 66: Programming Records

    ATS Control Panel Manager's manual Programming records Use the following pages to record details of the relevant data programmed for your system that relates to: 1. Menu option 14 - Users 2. Menu option 20 - Door Groups 3. Menu option 20 - Floor Groups 4.

  • Page 67: User Record - Menu Option 14

    User record – Menu option 14 Use this page to record details of the relevant user data for your system. By using a pencil to complete these details, you can then easily erase obsolete entries and keep the record up to date and compact.

  • Page 68: Door Group Record - Menu Option 20

    ATS Control Panel Manager's manual Door group record – Menu option 20 Door Group N°: Door Group N°: Door Time Door Time Door Time Door Time N°: zone: N°: zone: N°: zone: N°: zone: * = Disabled * = Disabled...

  • Page 69: Floor Group Record - Menu Option 20

    Floor group record – Menu option 20 Floor Group N°: Floor Group N°: Floor Time Floor Time Floor Time Floor Time N°: zone: N°: zone: N°: zone: N°: zone: * = Disabled * = Disabled...

  • Page 70: Holiday Record - Menu Option 20

    ATS Control Panel Manager's manual Holiday record – Menu option 20 Holiday Number: Number Date Month Year Holiday Number: Number Date Month Year Holiday Number: Number Date Month Year Holiday Number: Number Date Month Year Holiday Number: Number Date Month Year Holiday Number: Number Date...

  • Page 71: Alarm Group Record (Details To Be Supplied By The Installer)

    Alarm group record (details to be supplied by the installer) Number: Name: Function Summary: Number: Name: Function Summary: Number: Name: Function Summary: Number: Name: Function Summary: Number: Name: Function Summary: Number: Name: Function Summary: Number: Name: Function Summary:...

  • Page 72: Timezone Record (Details To Be Supplied By The Installer)

    ATS Control Panel Manager's manual Timezone record (details to be supplied by the installer) Timezone Number Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL Start Days: SUN/MON/TUE/WED/THU/FRI/SAT/HOL...

  • Page 73: Glossary

    Glossary Access control The control of entry to, or exit from, a security area. Active See Normal/Active/Tamper/Inhibited Alarm The state of a security system when a device connected to a zone is activated and the condition of the area is such that activation should be signalled. For example, a door lock is broken, causing a siren to sound.
  • Page 74 ATS Control Panel Manager's manual (Light Emitting Diode). A visual indicator on an arming station which conveys a condition, for example,; area in alarm, communication fault, etc. Local alarm An alarm that is signalled only within a premise and occurs when an area is occupied. The circumstances that cause a local alarm can be checked and rectified by personnel on site and it is therefore unnecessary for the alarm to be reported to a central station.

  • Page 75: Index

    Index Active zones Date PIN codes when arming/disarming, 19 programming, 54 description, 10 Adding a user to the system, 45 Deleting a user from the system, 45, 47 restrictions when using, 11 Advisor MASTER menus using, 11 accessing, 25 inhibiting, 57 Programming record sheets, 66 door and floor groups, 60 Disarm test, 33...

This manual is also suitable for:

Advisor masterats110 series

Table of Contents