Paper Rubs Against The Printhead; The Edges Of The Paper Are Dirty - Canon ipf8300 User Manual
Hide thumbs
Also See for ipf8300:
- Basic manual (52 pages) ,
- Setup manual (16 pages) ,
- Brochure (4 pages)
Table of Contents
Advertisement
Troubleshooting
Paper rubs against the printhead
The type of paper specified in the
printer driver does not match the
type loaded in the printer.
Paper has been loaded incorrectly,
causing it to wrinkle.
The Printhead is set too low in the
Control Panel menu.
You are printing on heavyweight
paper or paper that curls or wrin-
kles easily after absorbing ink.
12
When you have loaded paper, the
paper you have loaded does not
match the type selected on the
Control Panel.
1058
The edges of the paper are dirty
The Platen has become dirty after
borderless printing or printing on
small paper.
Paper rubs against the printhead
Downloaded from ManualsPrinter.com Manuals
>
Problems with the printing quality
Cause
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Reload the paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
In the Control Panel menu, set Head Height to Automatic.
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→P.843
When printing on Heavyweight Coated Paper or other paper-based media, choose
a VacuumStrngth setting of Strong or Strongest in the Control Panel menu. If
rubbing still occurs, in the Control Panel menu, use a higher Head Height setting.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→P.843
When printing on CAD Tracing Paper or other film-based media, choose a Vac-
uumStrngth setting of Standard, Strong, or Strongest in the Control Panel
menu. If rubbing still occurs, in the Control Panel menu, use a higher Head
Height setting.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→P.843
When printing on paper 0.1 mm (0.004 in) thick or less, choose a Vac-
uumStrngth setting of Weakest in the Control Panel menu. If rubbing still oc-
curs, in the Control Panel menu, use a higher Head Height setting.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
(See "Troubleshooting Paper Abrasion and Blurry Images (Head Height).")
→P.843
Be sure to select the correct type of paper in the Control Panel menu when load-
ing paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Cause
Open the Top Cover and clean the Platen.
(See "Cleaning Inside the Top Cover.")
>
Corrective Action
→P.777
→P.777
→P.777
Corrective Action
→P.802
→P.802
→P.852
→P.852
→P.852
→P.802
→P.1026
iPF8300
Advertisement
Table of Contents
Troubleshooting
