Clearing Diagnostic Results; Verifying The Online Diagnostics Configuration; Cisco Nexus 9000 Series Nx-Os System Management Configuration Guide, Release - Cisco Nexus 9000 Series Configuration Manual
Nx-os system management configuration
guide, release 6.x
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (562 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Configuring Online Diagnostics
Procedure
Step 1
Clearing Diagnostic Results
You can clear diagnostic test results.
Procedure
Step 1
Step 2
Verifying the Online Diagnostics Configuration
To display online diagnostics configuration information, perform one of the following tasks:
Command
show diagnostic bootup level
show diagnostic content module {slot | all}
Command or Action
diagnostic test simulation module slot test test-id {fail
| random-fail | success} [port number | all]
Example:
switch# diagnostic test simulation module 2
test 2 fail
Command or Action
diagnostic clear result module [slot | all] test
{test-id | all}
Example:
switch# diagnostic clear result module 2
test all
diagnostic test simulation module slot test
test-id clear
Example:
switch# diagnostic test simulation module
2 test 2 clear
Cisco Nexus 9000 Series NX-OS System Management Configuration Guide, Release 6.x
Clearing Diagnostic Results
Purpose
Simulates a test result. The test-id range
is from 1 to 14. The port range is from 1
to 48.
Purpose
Clears the test result for the specified test.
The argument ranges are as follows:
• slot—The range is from 1 to 10.
• test-id—The range is from 1 to 14.
Clears the simulated test result. The test-id
range is from 1 to 14.
Purpose
Displays information about bootup diagnostics.
Displays information about diagnostic test content
for a module.
155
Advertisement
Table of Contents
