Table of Contents
Advertisement
Set up for Portrait
5
Viewing Area / Location
Viewing Area: Set a mode of image division for Portrait function.
Location:
Set a location of image to be displayed for Portrait function.
Location setting
When Portrait Setup is "On":
Display the image of the selected location.
Viewing Area and Location
The mode of image division and the Location by setting of Viewing Area is as follows.
Viewing Area: 16:9
Location 1
Undisplayed area (48 dots)
Viewing Area: 4:3
Location 1
6
AI-synchronization
Adjust to equalize the brightness of the 3 displays when using Portrait setting.
Note:
If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial
values.
Picture menu: Colour, Hue
7
38
Press to select Viewing Area or Location.
Press to select each functions.
Notes:
• When the input signal is 16:9, Viewing Area is fi xed to "16:9".
• When "Viewing Area" is "16:9", the aspect mode is set to "16:9".
When Portrait Setup is "Off":
Represent an area of the selected Location at a normal
brightness and darken the rest of it.
Location 2
Location 3
Location 2
Location 3
Press to select AI-synchronization.
Press to select "Off" , "On".
The brightness depends
on each display's setting.
Off
Press twice to exit from Setup.
Suitable to display 16:9 images. 4:3 images
extend transversely.
Both right and left sides of the image are
cut by 48 dots.
4:3 images are displayed without changing
aspect ratio.
Although the images of each Location
overlap, you can adjust Pos. / Size to display
the image normally. (see page 19)
Equalize the brightness
of all the displays.
On
Portrait Setup
Portrait Setup
Off
Seam hides video
Off
Viewing Area
16 : 9
Location
Off
AI-synchronization
Portrait Setup
Portrait Setup
Off
Seam hides video
Off
16 : 9
Viewing Area
Location
AI-synchronization
Off
1
1
Hide quick links:
Advertisement
Table of Contents
