hit counter script
Panasonic TH-103PF9EK Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. TH-103PF9EK
  6. Service manual

Panasonic TH-103PF9EK Service Manual

Hide thumbs Also See for TH-103PF9EK:
Table of Contents

Advertisement

Quick Links

Specifications

Power Source (UK)
Power Source (EK)
Power Consumption
Power on (UK)
Power on (EK)
Stand-by condition
Power off condition
Plasma Display panel
Screen size
(No. of pixels)
Operating condition
Temperature
Humidity
Applicable signals
Color System
Scanning format
PC signals
Connection terminals
DVI-D
COMPONENT / RGB
240 V AC, 50 / 60Hz
220 V - 240 V AC, 50 / 60Hz
1,550 W
1,500 W
Save OFF 1.5 W, Save ON 1.3 W
0.5 W
Drive method: AC type 103-inch, 16:9 aspect ratio
89.5" (2,269 mm) (W) × 50.5" (1,277 mm) (H) × 103" (2,604 mm) (diagonal)
2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]
32 °F - 104 °F (0 °C - 40 °C)
20 % - 80 %
NTSC, PAL, PAL60, SECAM, Modified NTSC
525 (480) / 60i
60p, 625 (575) / 50i
VGA, SVGA, XGA, SXGA,
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Video Input
Audio Input
Content Protection
Y / G (BNC)
High Definition Plasma Display
TH-103PF9UK
TH-103PF9EK
GPF9D Chassis
50p, 750 (720) / 60p
50p, 1125 (1080) / 60i
24p
25p
30p
24sF .... SMPTE274M, 1250 (1080) / 50i
DVI-D 24 Pin × 1
compliance with DVI Revision 1.0
Stereo mini jack (M3) × 1
0.5Vrms
Compatible with HDCP 1.1
Y or G with / sync 1.0 Vp-p (75-ohm)
© 2006 Matsushita Electric Industrial Co., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO. ITD0610074CE
B34 Canada:D10
60p
50i
50p
Unauthorized
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TH-103PF9EK

Summary of Contents for Panasonic TH-103PF9EK

  • Page 1: Specifications

    ORDER NO. ITD0610074CE B34 Canada:D10 High Definition Plasma Display TH-103PF9UK TH-103PF9EK GPF9D Chassis Specifications Power Source (UK) 240 V AC, 50 / 60Hz Power Source (EK) 220 V - 240 V AC, 50 / 60Hz Power Consumption Power on (UK)

  • Page 2: Table Of Contents

    (EK) approx. 220.0 kg net Notes: · Design and specifications are subject to change without notice. Mass and dimensions shown are approximate. · This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3. (TH-103PF9EK) CONTENTS Page Page 1 Applicable signals 6.7.
  • Page 3 TH-103PF9UK / TH-103PF9EK 6.21. Removal of S1-Board 11.1. RGB white balance adjustment 6.22. Removal of SS2-Board 11.2. HD white balance adjustment 6.23. Removal of SS3-Board 11.3. Power control adjustment 6.24. Removal of SS-Board 12 Troubleshooting guide 6.25. Removal of Fan 12.1.

  • Page 4: Applicable Signals

    TH-103PF9UK / TH-103PF9EK 1 Applicable signals...

  • Page 5: Safety Precautions

    TH-103PF9UK / TH-103PF9EK 2 Safety Precautions 2.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 6: Prevention Of Electro Static Discharge (Esd) To Electrostatically Sensitive (Es) Devices

    TH-103PF9UK / TH-103PF9EK 3 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...

  • Page 7: About Lead Free Solder (Pbf)

    TH-103PF9UK / TH-103PF9EK 4 About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).

  • Page 8: Service Hint

    TH-103PF9UK / TH-103PF9EK 5 Service Hint...
  • Page 9 TH-103PF9UK / TH-103PF9EK Board Name Function Board Name Function Digital Signal Processor, Data Drive (X) Format Converter, Data Drive (Y) Plasma AI Processor Data Drive (Z) Sub-Field Processor Audio Out Slot Interface (Audio / Video / Sync Input Power Switch...

  • Page 10: Disassembly

    TH-103PF9UK / TH-103PF9EK 6 Disassembly 6.1. Rear Cover and Board Rear Cover required to remove for each board exchange. Board Name Rear Cover D-Board DS-Board SS-Board SC-Board A , B , C SC2-Board A , C SU-Board SM-Board SD-Board C1-Board...

  • Page 11: Location Of Rear Cover Screws

    TH-103PF9UK / TH-103PF9EK Board Name Rear Cover P-Board (MULTI_2) P-Board (SUS_2) F-Board PC-Board HX-Board HA-Board DN-Board HDD-Board CD-Board (A) CD-Board (B) CD-Board (C) CD-Board (D) CD-Board (E) CD-Board (F) DR1-Board (A) DR1-Board (B) DR2-Board (A) DR2-Board (B) 6.2. Location of Rear Cover screws...
  • Page 12 TH-103PF9UK / TH-103PF9EK 6.2.1. Removal of Rear Cover ( A ) 1. Remove screws (×21 , ×2 ) and then remove the Rear Cover ( A ). Remove the hooks and then remove 2 Covers. 6.2.2. Removal of Rear Cover ( B ) 1.
  • Page 13 TH-103PF9UK / TH-103PF9EK 6.2.3. Removal of Rear Cover ( C ) 1. Remove screws (×19 ) and then remove the Rear Cover ( C ). Tighten the screw first in order of when mounting the Rear Cover C . 6.2.6.

  • Page 14: Removal Of Side Angle (L), (R)

    TH-103PF9UK / TH-103PF9EK 2. Remove 19 screws and then remove the Side Angle (L). 6.3. Removal of Side Angle (L), (R) 6.3.2. Removal of Side Angle (R) 1. Remove Side Angle (L), (R) beforehand when remove the 1. Remove 4 screws and then remove the Customer Control following Boards.

  • Page 15: Removal Of Ha-Board

    TH-103PF9UK / TH-103PF9EK 6.4. Removal of HA-Board 1. Remove 4 screws (H) and then pull HA-Terminal Block out to forward. 2. Remove 4 screws (J) and remove Shield Plate. 3. Remove 2 screws (K) and then remove HA-Board. 4. Remove 19 screws and then remove the Side Angle (R).

  • Page 16: Removal Of Hx-Board

    TH-103PF9UK / TH-103PF9EK 1. Disconnect the connectors (DS1, DS2, DS4, DS6, DS7, 6.7. Removal of HX-Board DS8, DS9, DS10, DS14, DS15, DS30). 2. Remove 4 screws and then remove the Slot Block Case. 1. Remove the HA Terminal Block and the HDD Terminal Block.

  • Page 17: Removal Of Dn-Board

    TH-103PF9UK / TH-103PF9EK 6.8. Removal of DN-Board 1. Remove the flexible cables from the connectors (DN1, DN6). 2. Disconnect the connectors (DN2, DN3, DN51). 3. Remove 4 screws and then remove DN-Board. 6.10. Removal of H5-Board 1. Disconnect a connector (H51).

  • Page 18: Removal Of D-Board

    TH-103PF9UK / TH-103PF9EK 6.12. Removal of P-Board (MULTI_1), (MULTI_2) The fuses are not included in P-Board for the repair. 1. Disconnect the connectors (P5, P12, P25, P51, P53, P55). 2. Remove 9 screws and then remove P-Board (MULTI_1). 6.11. Removal of D-Board 1.

  • Page 19: Removal Of F-Board

    TH-103PF9UK / TH-103PF9EK 6.13. Removal of P-Board (SUS_1), 6.14. Removal of F-Board (SUS_2) The fuses (F900, F901, F903, F904) are not included in F- Board for the repair. The fuses are not included in P-Board for the repair. 1. Disconnect the connectors (F1, F8, F9).

  • Page 20: Removal Of Su-Board

    TH-103PF9UK / TH-103PF9EK 5. Remove the flexible cables from the connectors (SU1, SU2, 6.16. Removal of SU-Board SU3, SU4). 6. Disconnect the connectors (SU45, SU55). 1. Remove the Side Angle (R). (Refer to Removal of the Side Angle (L), (R) ) 2.

  • Page 21: Removal Of Sm-Board

    TH-103PF9UK / TH-103PF9EK 9. Remove SU-Board. 4. Remove 8 screws. 5. Slide SM-Board to the left direction to remove SM-Board 6.17. Removal of SM-Board from the connectors (SC43, SC46). 1. Remove 2 screws and then remove the Fan Block (A).

  • Page 22: Removal Of Sc-Board

    TH-103PF9UK / TH-103PF9EK 6.19. Removal of SC-Board 2. Remove the flexible cables from the connectors (SD1, SD2, SD3, SD4). 3. Disconnect the connectors (SD52, SD56). 1. Remove SU-Board. (Refer to Removal of SU-Board) 2. Remove SM-Board. (Refer to Removal of SM-Board) 3.

  • Page 23: Removal Of S1-Board

    TH-103PF9UK / TH-103PF9EK 2. Remove 4 screws and then remove SC2-Board. 6.22. Removal of SS2-Board 1. Remove the Side Angle (L). (Refer to Removal of the Side Angle (L)) 2. Remove 6 screws and then remove the Reinforcement Plaste (E).

  • Page 24: Removal Of Ss3-Board

    TH-103PF9UK / TH-103PF9EK 5. Disconnect the connectors (SS36, SS37, SS38, SS39). 6. Remove 6 screws and then remove SS3-Board. 6.23. Removal of SS3-Board 6.24. Removal of SS-Board 1. Remove the Side Angle (L). (Refer to Removal of Side Angle (L)) 2.

  • Page 25: Removal Of Fan

    TH-103PF9UK / TH-103PF9EK 3. Remove the flexible cables from the connectors (SS55, SS56, SS57, SS58). 4. Disconnect the connectors (SS2, SS12, SS21, SS22, SS23, SS24, SS25, SS26, SS27, SS28, SS35, SS42, SS44). 5. Remove 13 screws and then remove SS-Board.

  • Page 26: Removal Of C1-Board

    TH-103PF9UK / TH-103PF9EK 6.26. Removal of C1-Board 6.27. Removal of C2-Board 1. Remove the Side Angle (R). (Refer to Removal of Side Angle (R)) 1. Remove 5 screws and then remove the Rear Cover Angle 2. Remove the Reinforcement Angle (A).

  • Page 27: Removal Of C3-Board

    TH-103PF9UK / TH-103PF9EK 6. Remove 6 screws and then remove C2-Board. 2. Remove 6 screws and then remove the Reinforcement Angle (C). 6.28. Removal of C3-Board 3. Remove 6 screws of the flexible cable. 4. Remove the flexible cables from the connectors (CA6, CA7, CA8, C31, C32).

  • Page 28: Removal Of C4-Board

    TH-103PF9UK / TH-103PF9EK 6.30. Removal of C5-Board 6.29. Removal of C4-Board 1. Remove 8 screws ( ) and then remove the Fan Block (C), (D). 1. Remove 5 screws and then remove the Rear Cover Angle (C). 2. Remove 5 screws ( ) and then remove the Rear Cover Angle (E).

  • Page 29: Removal Of C6-Board

    TH-103PF9UK / TH-103PF9EK 6.31. Removal of C6-Board 1. Remove the Side Angle (L). (Refer to Removal of Side Angle (L)) 4. Remove 6 screws of the flexible cable. 2. Remove the Fan Block (D). 5. Remove the flexible cables from the connectors (CA12, (Refer to Removal of Fan) CA13, CA14, C50, C51, C53).

  • Page 30: Removal Of C7-Board

    TH-103PF9UK / TH-103PF9EK 6.32. Removal of C7-Board 6.33. Removal of C8-Board 1. Remove the Side Angle (L). 1. Remove 6 screws of the flexible cable. (Refer to Removal of the Side Angle (L)) 2. Remove the flexible cables from the connectors (CB12, CB13, CB14, C80, C81, C83).

  • Page 31: Removal Of Cx-Board

    TH-103PF9UK / TH-103PF9EK (D). 6. Remove 5 screws and then remove C9-Board. 2. Remove 6 screws and then remove the Reinforcement 6.35. Removal of CX-Board Angle (D). 1. Remove the Rear Cover Angle (D). (Refer to Removal of C9-Board) 2. Remove the Reinforcement Angle (D).

  • Page 32: Removal Of Cy-Board

    TH-103PF9UK / TH-103PF9EK 6. Remove 5 screws and then remove CX-Board. 5. Remove 6 screws and then remove CY-Board. 6.36. Removal of CY-Board 6.37. Removal of CZ-Board 1. Remove the Reinforcement Angle (B). (Refer to Removal of SD-Board) 2. Remove 6 screws of the flexible cable.

  • Page 33: Removal Of Dr1-Board (A)

    3. Remove 5 screws and then remove the DR1-Board (A). 6. Remove 4 screws and then remove CZ-Board. 6.39. Removal of DR1-Board (B) Attaching short jumper to connector (DR6). Attach Short Jumper to the connector (DR6) when replacing DR1-Board. 6.38. Removal of DR1-Board (A) 1.

  • Page 34: Removal Of Dr2-Board (A)

    6.40. Removal of DR2-Board (A) 1. Disconnect the connectors (DR11, DR12, DR13, DR14, DR15). 2. Remove 5 screws and then remove DR2-Board (A). 6.42. Removal of CD-Board 6.42.1. Removal of CD-Board (A) 1. Remove the flexible cables from the connectors (CD1, 6.41.
  • Page 35 TH-103PF9UK / TH-103PF9EK 2. Remove 2 screws and then remove CD-Board (B). 6.42.5. Removal of CD-Board (E) 1. Remove 2 screws and then remove the Angle. 6.42.3. Removal of CD-Board (C) 1. Remove the flexible cables from the connectors (CD1, CD2).

  • Page 36: Removal Of Ac Inlet

    TH-103PF9UK / TH-103PF9EK 6.44. Removal of Escutcheon and Front Glass 6.44.1. Removal of Front Glass 1. Remove 4 screws and then remove the Customer Control Unit. 2. Disconnect a connector (S34). 6.43. Removal of AC Inlet 1. Disconnect a connector (F1).
  • Page 37 TH-103PF9UK / TH-103PF9EK Note: When replacing the Front Glass · The sponges for the Front Glass cannot be recycled. · When replacing the Front Glass, use the new sponges. 6.44.2. Removal of Escutcheon (A) 1. Remove 9 screws ( ) and then remove the Fixed Angles 5.
  • Page 38 TH-103PF9UK / TH-103PF9EK 6.44.4. Removal of Escutcheon (C) 6.44.3. Removal of Escutcheon (B) 1. Remove 13 screws and then remove the fixed Angles (C). 1. Remove 9 screws ( ) and then remove the fixed Angles (B). 2. Remove each 5 screws ( ) 3.

  • Page 39: Removal Of V1-Board And V3-Board

    TH-103PF9UK / TH-103PF9EK 6.45. Removal of V1-Board and V3- 6.44.5. Removal of Escutcheon (D) Board 1. Remove 13 screws and then remove the fixed Angles (D). 1. Remove 1 screw (T) and then remove V1-Board. 2. Remove 1 screw (U) and then remove V3-Board.

  • Page 40: Removal Of Plasma Panel

    TH-103PF9UK / TH-103PF9EK 7 Removal of Plasma Panel 1. Remove the Rear Covers. (Refer to Removal of Rear Cover.) 2. Remove 4 screws and then remove the Customer Control Unit. 3. Disconnect a connector (S34). 7. Remove 4 screws ( ) and then remove the Angles.
  • Page 41 TH-103PF9UK / TH-103PF9EK Holder (upper), (bottom). 13. Remove 4 screws ( ) and then remove D-Board. 19. Remove 2 screws and then remove H5-Board Block. 20. Disconnect a connector (H51). 14. Remove the flexible cables from the connectors (DN1, DN6).
  • Page 42 TH-103PF9UK / TH-103PF9EK DR15). 24. Remove 5 screws and then remove DR2-Board (A). 25. Disconnect the connectors (P2, P5, P9, P12, P25, P51, P53, P55). 26. Remove 19 screws and then remove P-Board (MULT_1), (SUS_1). 29. Disconnect the connectors (SC12, SC13, SC14, SC34, SC80, SC81, SC82).
  • Page 43 TH-103PF9UK / TH-103PF9EK 37. Disconnect a connector (CY0) connected with CY-Board. 38. Remove 2 screws and then remove CD-Board (F). 33. Disconnect a connector (C20) connected with C2-Board. 34. Remove 2 screws and then remove CD-Board (A). 39. Disconnect the connectors (F1, F8, F9).
  • Page 44 TH-103PF9UK / TH-103PF9EK 43. Remove 4 screws and then remove CD-Board (B), (C). 46. Remove the flexible cables from the connectors (C80, C90). 47. Remove 4 screws and then remove CD-Board (D), (E). 44. Remove each 1 screw ( ) and then remove the Flexible Holders (6 places).
  • Page 45 TH-103PF9UK / TH-103PF9EK 54. Remove 3 screws and then remove the AC-Inlet. 50. Remove the connectors (DR1, DR2, DR3, DR4, DR5). 51. Remove 5 screws and then remove DR1-Board (B). 55. Remove the Plasma Panel. 52. Remove the connectors (DR11, DR12, DR13, DR14, DR15).
  • Page 46 TH-103PF9UK / TH-103PF9EK Structure of replacement Plasma Panel (Spare Parts)

  • Page 47: Location Lead Wiring

    TH-103PF9UK / TH-103PF9EK 8 Location Lead Wiring 8.1. Lead Wiring (1)

  • Page 48: Lead Wiring (2)

    TH-103PF9UK / TH-103PF9EK 8.2. Lead Wiring (2)

  • Page 49: Lead Wiring (3)

    TH-103PF9UK / TH-103PF9EK 8.3. Lead Wiring (3)

  • Page 50: Lead Wiring (4)

    TH-103PF9UK / TH-103PF9EK 8.4. Lead Wiring (4)

  • Page 51: Lead Wiring (5)

    TH-103PF9UK / TH-103PF9EK 8.5. Lead Wiring (5)

  • Page 52: Lead Wiring (6)

    TH-103PF9UK / TH-103PF9EK 8.6. Lead Wiring (6)

  • Page 53: Lead Wiring (7)

    TH-103PF9UK / TH-103PF9EK 8.7. Lead Wiring (7)

  • Page 54: Lead Wiring (8)

    TH-103PF9UK / TH-103PF9EK 8.8. Lead Wiring (8)

  • Page 55: Lead Wiring (9)

    TH-103PF9UK / TH-103PF9EK 8.9. Lead Wiring (9)

  • Page 56: Adjustment Procedure

    9 Adjustment Procedure 9.1. Driver Set-up 9.1.1. Item / Preparation 1. Set Aging pattern 0 (Vset adjustment pattern) by IIC mode. 2. Set the picture adjustment items as follows. · Picture menu : Standard · Color temperature : Normal · Picture : 25 ·...

  • Page 57: Initialization Pulse Adjust

    9.2. Initialization Pulse Adjust 1. Set Aging pattern 0 (Vset adjustment pattern) by IIC mode. 2. Set the picture adjustment items as follows. · Picture menu : Standard · Color temperature : Normal · Picture : 25 · Aspect : Full 3.

  • Page 58: P.c.b. (Printed Circuit Board) Replacement

    9.3. P.C.B. (Printed Circuit Board) Replacement 9.3.1. Caution 1. To remove P.C.B., wait 1 minute after power was off for discharge from electrolysis capacitors. 9.3.2. Quick adjustment after P.C.B. Replacement. Adjust the following voltages with the multimeter. P.C.B. Name Test Point Voltage Volume Remarks...

  • Page 59: Adjustment Volume Location

    TH-103PF9UK / TH-103PF9EK 9.4. Adjustment Volume Location 9.5. Test Point Location...

  • Page 60: Service Mode

    TH-103PF9UK / TH-103PF9EK 10 Service mode 10.1. CAT (computer Aided Test) mode To exit the CAT mode, access the ID mode and switch off the main power. 10.1.1. IIC mode Select the IIC mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button on the remote control.
  • Page 61 TH-103PF9UK / TH-103PF9EK 10.1.2. CD mode Select the CD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 5 seconds.
  • Page 62 TH-103PF9UK / TH-103PF9EK 10.1.4. MS mode Select the MS mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 5 seconds.
  • Page 63 TH-103PF9UK / TH-103PF9EK 10.1.5. ID mode Select the ID mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 5 seconds.
  • Page 64 TH-103PF9UK / TH-103PF9EK 10.2. IIC mode structure (following items value is sample data)

  • Page 65: Adjustment

    TH-103PF9UK / TH-103PF9EK 11 Adjustment 11.1. RGB white balance adjustment Instrument Name Connection Remarks · RGB VGA W / B pattern PC input User setting: Normal Panel surface (Picture menu: Standard) · Color analyzer (Minolta CA-100 or equivalent) Procedure Remarks ·...
  • Page 66 TH-103PF9UK / TH-103PF9EK...

  • Page 67: Hd White Balance Adjustment

    TH-103PF9UK / TH-103PF9EK 11.2. HD white balance adjustment Instrument Name Connection Remarks · HD W / B pattern (COMPONENT Output) PC input User setting: Normal Panel surface (Picture menu: Standard) · Color analyzer (Minolta CA-100 or equivalent) Procedure Remarks · Ensure aging is adequate.
  • Page 68 TH-103PF9UK / TH-103PF9EK...

  • Page 69: Power Control Adjustment

    TH-103PF9UK / TH-103PF9EK 11.3. Power control adjustment Instrument Name Connection Remarks · PC (RGB) signal generator · PC input Set “RGB” at ‘COMPONENT / RGB-IN SELECT’ in Setup Menu. (Leader: VGA / No.9 signal) · Connect the AC power of the adjustment set to the wattmeter.

  • Page 70: Troubleshooting Guide

    TH-103PF9UK / TH-103PF9EK 12 Troubleshooting guide 12.1. Self Check 12.1.1. Display Indication 1. Self-check is used to automatically check the bus line controlled circuit of the Plasma display. 2. To get into the Self-check mode, press the volume down button on the customer controls at the side of the set, at the same time pressing the OFF-TIMER button on the remote control, and the screen will show.

  • Page 71: Power Led Blinking Timing Chart

    TH-103PF9UK / TH-103PF9EK 12.1.2. Power LED Blinking timing chart 1. Subject Information of LED Blinking timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the...

  • Page 72: No Power

    TH-103PF9UK / TH-103PF9EK 12.2. No Power First check point There are following 3 states of No Power indication by power LED. 1. No lit. 2. Green is lit then turns red blinking a few seconds later. 3. Only red is lit.

  • Page 73: Local Screen Failure

    TH-103PF9UK / TH-103PF9EK 12.4. Local screen failure Plasma display may have local area failure on the screen. Fig - 1 is the possible defect P.C.B. for each local area. Fig - 1...

  • Page 74: Option Setting

    TH-103PF9UK / TH-103PF9EK 13 Option Setting...
  • Page 75 TH-103PF9UK / TH-103PF9EK Option Menu for GPF9DJ series GPH9DJ chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful for special function required customers. This should be set at the installation stage. Option menus...
  • Page 76 TH-103PF9UK / TH-103PF9EK NOTE...

  • Page 77: Interconnection And Block Diagram

    TH-103PF9UK / TH-103PF9EK 13 Interconnection and Block Diagram 13.1. Diagram Note...

  • Page 78: Interconnection (1 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.2. Interconnection (1 of 8) Diagram FAN (120) CABLE <L6FAYYYH0031> PB59 TO DN6 <TSXL584> TO P5(SC SIDE) TO P10(SC SIDE) FAN+12V 65 66 FAN_SOS FAN (120) 59 58 36 35 <L6FAYYYH0031> PB61 FAN+12V FAN_SOS FAN (120) <L6FAYYYH0031>...

  • Page 79: Interconnection (2 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.3. Interconnection (2 of 8) Diagram CABLE TO DS6 <TSXL584> DN51 E+LVDS0 E-LVDS0 E+LVDS1 E-LVDS1 CABLE E+LVDS2 <TSXL585> E-LVDS2 E+LVDS3 E-LVDS3 E+LVDS4 E-LVDS4 E+LVDSCLK E-LVDSCLK TO D5 LVDS_DET TO DS1 O+LVDSCLK HD_M O-LVDSCLK VD_M O+LVDS0 O-LVDS0 B/PB_M...

  • Page 80: Interconnection (3 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.4. Interconnection (3 of 8) Diagram (Exchange board only) SCAN OUT (UPPER) <TNPA4030> A1-A54 SC41(SC41-SU41) SC42(SC42-SU42) B1-B54 Vsus TO P2 (SC SIDE) Vf+5V Vf+5V SC23 A1-A54 Vf+5V Vf+5V P+15V B1-B54 TO P23 P+15V (SC SIDE) Vscn Vscn...

  • Page 81: Interconnection (4 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.5. Interconnection (4 of 8) Diagram UK : AC 240V, 50 / 60Hz EK : AC 220-240V, 50 / 60Hz NEUTRAL AC CORD LINE FILTER LINE UK : <K2CG3YY00011> <TNPA4055> EK : <K2CN3YY00003> <K2CT3YY00002> AC INLET (Exchange board only) <K2AHYH000009>...

  • Page 82: Interconnection (5 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.6. Interconnection (5 of 8) Diagram Vda_RU(+78V) DOUTUC[28] CLKU[6](+) Vda_RU(+78V) 1-68 1-68 1-68 1-68 1-68 Vda_RU(+78V) DOUTUA[29] CLKU[7](-) E+ LVDS0 Vda_RU(+78V) DOUTUB[29] DOUTUB[31] E- LVDS0 Vda_RU(+78V) DOUTUC[29] CLRU1 C1 DATA DRIVER (1) DOUTUA[31] DSLR DOUTUC[24] PCU1 CLKU7(-)

  • Page 83: Interconnection (6 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.7. Interconnection (6 of 8) Diagram CA10 CA11 DOUTUA[16] DOUTUA[21] 1-68 1-68 1-68 1-68 1-68 1-68 DOUTUB[16] DOUTUB[21] DOUTUC[16] DOUTUC[21] Vda_RU(+78V) Vda_RU(+78V) C3 DATA DRIVER (3) DOUTUA[17] CLKU4(+) Vda_RU(+78V) P+5V DOUTUB[20] CLKU4(+) DOUTUB[17] Vda_RU(+78V) CLRU3 P+5V DOUTUA[20] DOUTUC[13] <TNPA4020>...

  • Page 84: Interconnection (7 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.8. Interconnection (7 of 8) Diagram CA12 CA13 CA14 Vda_LU(+78V) 1-68 1-68 1-68 Vda_LU(+78V) PCU6 Vda_LU(+78V) Vda_LU(+78V) CLRU5 DOUTUB[9] CLKU0(+) C4 DATA DRIVER (4) Vda_LU(+78V) PCU5 DOUTUA[9] DOUTUC[2] C5 DATA DRIVER (5) DOUTUB[2] <TNPA4021> Vda_LU(+78V) LEU5 Vda_LU(+78V)

  • Page 85: Interconnection (8 Of 8) Diagram

    TH-103PF9UK / TH-103PF9EK 13.9. Interconnection (8 of 8) Diagram SS51 1-13 SS2 SUSTAIN OUT(UPPER) DR13 P+75V(Vda) CA15 CA16 <TNPA4036> P+75V(Vda) 1-68 1-68 P+75V(Vda) (Exchange board only) SS52 ENERGY DATA RECOVERY Vda_LU(+78V) DOUTUC[3] CLKU[0](+) P+75V(Vda) Vda_LU(+78V) <TNPA4100> Vda_LU(+78V) DOUTUA[2] CLKU[1](-) Vda_LU(+78V)

  • Page 86: Main (1 Of 2) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.10. Main (1 of 2) Block Diagram D.D. D.D. D.D. D.D. D.D. D.D. D.D. D.D. SCAN OUT Vda_LU(+78V) Vda_LU(+78V) P+75V(Vda) P+75V(Vda) DATA DRIVER(2) DATA DRIVER(1) +78V(Vda) Vda_CONT DATA DRIVER(3) GENE SOS7 Vda DET ENERGY RECOVERY DN51 DIGITAL...

  • Page 87: Main (2 Of 2) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.11. Main (2 of 2) Block Diagram D.D. D.D. D.D. D.D. D.D. D.D. D.D. D.D. SUSTAIN Vda_RU(+78V) Vda_RU(+78V) P+75V(Vda) P+75V(Vda) DATA DRIVER(4) DATA DRIVER(5) DATA DRIVER(6) DR13 Vda_RU(+78V) DR14 P+75V(Vda) Vda_CONT +78V(Vda) GENE DR12 Vda DET SOS7...

  • Page 88: P-Board (1 Of 2) And F-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.12. P-Board (1 of 2) and F-Board Block Diagram TO SC2 (SC SIDE) COLD TO SS2 D1605 D1609 (SS SIDE) RF1601 3A Vsus Vsus Vsus D1606 Vsus F201 T201 TO F9 D251 R254 TO SC82 VSUS L1604...

  • Page 89: P-Board (2 Of 2) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.13. P-Board (2 of 2) Block Diagram MC401 Vda CONTROL MODULE RF1701 3A RECTIFIER Q405 Q406 TO P52 D1703 K1702 K1701 F1701 L1702 D1704 D1711 F301 L1701 IC01 AC_L D402 <K5D502BNA007> D1705 Q301 T301 R1761 R528 Q303...

  • Page 90: Ha, Hx, Pc, Pb, V1, V2 And V3-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.14. HA, HX, PC, PB, V1, V2 and V3-Board Block Diagram POWER CONTROL FAN CONTROL IC850 REGULATOR <TNPA4041> FAN (120) <L6FAYYYH0031> TO P25 VOLTAGE HA COMPONENT VIDEO (Exchange board only) (P-BOARD SS SIDE) CONTROL <TXNHA10RBS> D874 Q203...

  • Page 91: Hdd-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.15. HDD-Board Block Diagram DVI-D IN <TNPA4052> JK3501 (Exchange board only) AUDIO_R Q3501 DVI-D AUDIO IN AUDIO_L Q3511 TO DS12 +3.3V SLOT3.3V SLOT3.3V SLOT5V ODD_B0-B7 SLOT5V SLOT9V SLOT9V STB+5V STB5V LAN15V LAN+15V LAN+15V PLUGDET AUDIO_R AUDIO IN R...

  • Page 92: Ds-Board (1 Of 2) And H3-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.16. DS-Board (1 of 2) and H3-Board Block Diagram STB3.3V SLOT INTERFACE D_3.3V IC3008 SYNC PROCESSOR SOUND PROCESSOR IIC ON/OFF S_CLOCK3 <TNPA4217> S_DATA3 (Exchange board only) TO P5 RESET (P-BOARD SC SIDE) SOUND MUTE +15V +15V AUDIO L...

  • Page 93: Ds-Board (2 Of 2) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.17. DS-Board (2 of 2) Block Diagram TO V1 TO V3 TO V15 TO DN3 STB3.3V STB3.3V SLOT INTERFACE STB5V TO P10 5V_M LAN15V SYNC PROCESSOR (P-BOARD SC SIDE) LAN15V(F_STBY) SOUND PROCESSOR LAN15V(F_STBY) DS-BOARD SOS <TNPA4217> STB5V_S...

  • Page 94: Dn-Board (1 Of 3) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.18. DN-Board (1 of 3) Block Diagram +3.3V IC5402 IC5405 CABLE 5V_M A/D CONVERTER(MAIN) <TSXL585> VIDEO BUFFER TO DS1 RE0-9(10bit) Pr/R IN R/PR-M +1.5V +3.3V G/Y-M 110M GE0-9(10bit) Y/G IN IC5001 IC5101 FPGA1 8BIT B/PB-M HD-M HD-M +3.3V...

  • Page 95: Dn-Board (2 Of 3) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.19. DN-Board (2 of 3) Block Diagram +1.5V +3.3V IC4501 +1.5V +2.5V +3.3V IC5501 IC4502 IC5201 I-CHIPS FPGA2 IC5502 LSI57Plus 32M DDR SDRAM +2.5V +3.3V RE0-9 SD-RAM SD_RAM1 GE0-9 RVIA0-9 DDR-SDRAM I/F INTERFACE BE0-9 GYIA0-9 I-CHIPS PORT1 OUTPUT...

  • Page 96: Dn-Board (3 Of 3) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.20. DN-Board (3 of 3) Block Diagram IC4304 IC4303 IC4307 IC4306 DIGITAL SIGNAL PROCESSOR/MICOM DC-DC CONVERTER DC-DC CONVERTER DC-DC CONVERTER P+15V DC-DC CONVERTER P+15V P+15V P+15V <TZTNP01YLTU> 15V->3.3V 15V->2.5V 15V->1.5V P5V_DC2 15V->1.8V P5V_DC P5V_DC1 (Exchange board only)

  • Page 97: D-Board (1 Of 2) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.21. D-Board (1 of 2) Block Diagram DIGITAL SIGNAL PROCESSOR FORMAT CONVERTER PLASMA AI SUB-FIELD PROCESSOR PICTURE OUTPUT<R> <TZTNP02YLTJ> R 10bit R10-R19(R) (Exchange board only) G 10bit G10-G19(R) B 10bit TO DN51 B10-B19(R) E+LVDS0 (RX_TA+) E-LVDS0 (RX_TA-)

  • Page 98: D-Board (2 Of 2) Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.22. D-Board (2 of 2) Block Diagram CABLE <TSXL568>(D31-CD1) <TSXL569>(C20-CD2) R-UP IC9401 TO C10 DIGITAL SIGNAL PROCESSOR/FORMAT CONVERTER DDR SDRAM<R>(128M) 30bit UA06-UC15<R> DOUTU31C PLASMA AI/SUB-FIELD PROCESSOR IC9400 PD1-M<RIGHT> <TZTNP02YLTJ> PLASMA AI/SUB FIELD PROCESSOR/DATA DRIVER<R> FORMAT CONVERTER/RGB PROCESSOR<R>...

  • Page 99: C1, C2, Cy And Cz-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.23. C1, C2, CY and CZ-Board Block Diagram DOUTU31C - DOUTU22A CABLE <TSXL568>(D31-CD1) <TSXL569>(C20-CD2) TO DR3 TO D31 (DR1-BOARD SC SIDE) (Via CD-BOARD) 23,30,31 29,43 41,42,49 CABLE DATA DATA <TSXL518> DATA DATA 8bit 6bit 8bit 8bit UA28,...

  • Page 100: C2, C3, Cx And Cy-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.24. C2, C3, CX and CY-Board Block Diagram TO DR4 TO DR2 TO DR5 (DR1-BOARD (DR1-BOARD (DR1-BOARD SC SIDE) SC SIDE) SC SIDE) 15 14 CABLE <TSXL518> CABLE P75V_R 78V_RU P75V_R 78V_RU <TSXL518> TO C41 P+5V DRVSOS7U_R...

  • Page 101: C4, C5, C8 And C9-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.25. C4, C5, C8 and C9-Board Block Diagram DOUTUC21 - DOUTUA10 CABLE DOUTUC9 - DOUTUA0 CABLE <TSXL570>(D32-CD1) <TSXL572>(D33-CD1) <TSXL571>(C40-CD2) TO PC204 <TSXL571>(C50-CD2) TO DR15 TO D32 TO D33 (DR2-BOARD (Via CD-BOARD) SS SIDE) (Via CD-BOARD) 19,22,23 21,25...

  • Page 102: C5, C6, C7 And C8-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.26. C5, C6, C7 and C8-Board Block Diagram TO DR12 TO DR14 TO DR13 (DR1-BOARD SS SIDE) (DR2-BOARD SS SIDE) (DR2-BOARD SS SIDE) 6-11 6-11 CABLE DATA <TSXL518> 6bit DOUTUA0 P75V_L 78V_LU DATA 12bit DA0-DC3 DATA 12bit DA0-DC3...

  • Page 103: Sc2 And S1-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.27. SC2 and S1-Board Block Diagram S1 POWER SW <TNPA4084> DC-DC CONVERTER (Exchange board only) FOR SCAN DRIVE TO DR1 <TNPA4034> (DR1-BOARD SC SIDE) Vda75V (Exchange board only) Vda75V PUSH Vda75V STB PS Vda75V STB_12V +15V SW061...

  • Page 104: Sc-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.28. SC-Board Block Diagram TO SU49 SCAN DRIVE TPSC1 SIGNAL WAVE TO P2 VSET FSIU FSIU (P-BOARD VSUS <TNPA4033> TPVSUS FCLU SC SIDE) FCLU 185V FCLKU Vsus (Exchange board only) VSUS FCLKU PROU PROU 15V_F IC6725 Vf+5V...

  • Page 105: Su, Sm And Sd-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.29. SU, SM and SD-Board Block Diagram VDDH VDDH VDDH IC6901 IC6913 IC6925 30bit 30bit 30bit VDDH VDDH VDDH IC6902 IC6914 IC6926 LINE LINE LINE 30bit 30bit 30bit BRIDGE CONNECTOR <K1LA23BA0003> VDDH VDDH VDDH IC6903 IC6915 IC6927...

  • Page 106: Ss, Ss2 And Ss3-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.30. SS, SS2 and SS3-Board Block Diagram TO P12 TO P2 (P-BOARD (P-BOARD SS SIDE) SS SIDE) SS51 Q6001-Q6006 OUTPUT TPVSUS Q6141- Vsus Gen. Q6144 SS52 BUFFER IC6131 Q6007-Q6012 SS2 SUSTAIN OUT OUTPUT TP15V Q6151- TO DR11...

  • Page 107: Dr1, Dr2 And Cd-Board Block Diagram

    TH-103PF9UK / TH-103PF9EK 13.31. DR1, DR2 and CD-Board Block Diagram C14(SC SIDE) C74(SS SIDE) ENERGY DATA RECOVERY Vda75V(P75V) Q7984-Q7988 Vda75V(P75V) <TNPA4039> OUTPUT Q7901- 78V Gen. Vda75V(P75V) CD C-BOARD/D-BOARD CONNECTION Q7904 (Exchange board only) TPDR Vda75V(P75V) BUFFER IC7851 DMHR <TNPA4040> 78V(Vda-RU/LD)
  • Page 108 TH-103PF9UK / TH-103PF9EK NOTE...

  • Page 109: Parts Location

    TH-103PF9UK / TH-103PF9EK 15 Parts Location 15.1. Exploded View 15.1.1. The main mechanical parts relation...
  • Page 110 TH-103PF9UK / TH-103PF9EK 15.1.2. Customer Control part location enlarged view 15.1.3. Escutcheon part location enlarged view...
  • Page 111 TH-103PF9UK / TH-103PF9EK 15.1.4. Fan part location enlarged view 15.1.5. Rear cover location enlarged view...

  • Page 112: Cable And Fan

    TH-103PF9UK / TH-103PF9EK 15.2. Cable and Fan 15.3. Board and Fuse...

  • Page 113: Packing Summary

    TH-103PF9UK / TH-103PF9EK 15.4. Packing summary...
  • Page 114 TH-103PF9UK / TH-103PF9EK...
  • Page 115 TH-103PF9UK / TH-103PF9EK...
  • Page 116 TH-103PF9UK / TH-103PF9EK...
  • Page 117 TH-103PF9UK / TH-103PF9EK...
  • Page 118 TH-103PF9UK / TH-103PF9EK...
  • Page 119 TH-103PF9UK / TH-103PF9EK...

  • Page 120: Replacement Parts List

    TH-103PF9UK / TH-103PF9EK 16 Replacement Parts List Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description EUR7636070R REMOTE CONTROLLER TMWC016 P BUTTON BRAKET EUR7636090R REMOTE CONTROLLER TMXX036 AC CORD CLAMPER B J0KD00000096 FERRITE CORE...
  • Page 121 TH-103PF9UK / TH-103PF9EK Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description TTUA1520 REAR TNPA4103 CIRCUIT BOARD PB COVER(CENTER/RIGHT TNPA4217 CIRCUIT BOARD DS TXNHA10RBS CIRCUIT BOARD HA TTUA1526 REAR TZTNP01YLTU CIRCUIT BOARD DN...

This manual is also suitable for:

Th-103pf9uk

Table of Contents