hit counter script
Panasonic TH-103PF10UK Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. TH-103PF10UK - 103" Plasma Panel
  6. Service manual
Panasonic TH-103PF10UK Service Manual

Panasonic TH-103PF10UK Service Manual

High definition plasma display
Hide thumbs Also See for TH-103PF10UK:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Technical Manual

TABLE OF CONTENTS

1 Safety Precautions----------------------------------------------- 3
1.1. General Guidelines---------------------------------------- 3
2 Warning -------------------------------------------------------------- 4
2.2. About lead free solder (PbF)---------------------------- 5
3 Service Navigation ----------------------------------------------- 6
3.1. Service Hint ------------------------------------------------- 6
3.2. Applicable signals ----------------------------------------- 8
4 Specifications ----------------------------------------------------10
5 Service Mode -----------------------------------------------------11
sample data) -----------------------------------------------15
5.3. Option Setting ---------------------------------------------16
6 Troubleshooting Guide ----------------------------------------18
6.1. Self Check--------------------------------------------------18
6.2. No Power ---------------------------------------------------20
6.3. No Picture --------------------------------------------------20
6.4. Local screen failure --------------------------------------21
7.1. Rear Cover and Board ----------------------------------22
7.2. Location of Rear Cover screws -----------------------23
7.3. Removal of Side Angle (L), (R) -----------------------26
7.4. Removal of HA-Board -----------------------------------27
High Definition Plasma Display
Model No.
Model No.
GPF10D Chassis
PAGE
7.5. Removal of HDMI-Board (UK) ------------------------ 28
7.6. Removal of HDD-Board (EK) ------------------------- 28
7.7. Removal of DS-Board ---------------------------------- 28
7.8. Removal of HX-Board----------------------------------- 29
7.9. Removal of DN-Board ---------------------------------- 29
7.10. Removal of PB-Board----------------------------------- 29
7.11. Removal of H5-Board ----------------------------------- 30
7.12. Removal of D-Board ------------------------------------ 30
7.15. Removal of F-Board ------------------------------------ 31
7.16. Removal of PC-Board ---------------------------------- 32
7.17. Removal of SU-Board ---------------------------------- 32
7.18. Removal of SM-Board ---------------------------------- 33
7.19. Removal of SD-Board ---------------------------------- 34
7.20. Removal of SC-Board --------------------------------- 34
7.21. Removal of SC2-Board -------------------------------- 35
7.23. Removal of SS2-Board -------------------------------- 36
7.24. Removal of SS3-Board -------------------------------- 36
7.25. Removal of SS-Board ---------------------------------- 37
7.26. Removal of Fan------------------------------------------- 38
7.27. Removal of C1-Board ----------------------------------- 39
7.28. Removal of C2-Board ----------------------------------- 39
7.29. Removal of C3-Board ----------------------------------- 40
© 2007 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
Order Number ITD0709071CE
TH-103PF10UK
TH-103PF10EK
B34 Canada: D10
PAGE

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TH-103PF10UK

Summary of Contents for Panasonic TH-103PF10UK

  • Page 1: Table Of Contents

    Order Number ITD0709071CE B34 Canada: D10 High Definition Plasma Display TH-103PF10UK Model No. TH-103PF10EK Model No. GPF10D Chassis TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions----------------------------------------------- 3 7.5. Removal of HDMI-Board (UK) ------------------------ 28 1.1. General Guidelines---------------------------------------- 3 7.6. Removal of HDD-Board (EK) ------------------------- 28 2 Warning -------------------------------------------------------------- 4 7.7.
  • Page 2 TH-103PF10UK/EK 7.30. Removal of C4-Board ----------------------------------- 41 10.13. Lead Wiring (5) ------------------------------------------ 103 7.31. Removal of C5-Board ----------------------------------- 41 10.14. Lead Wiring (6) ------------------------------------------ 104 7.32. Removal of C6-Board ----------------------------------- 42 10.15. Lead Wiring (7) ------------------------------------------ 105 7.33. Removal of C7-Board ----------------------------------- 42 10.16.

  • Page 3: Safety Precautions

    TH-103PF10UK/EK 1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.

  • Page 4: Warning

    TH-103PF10UK/EK 2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi- tive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...

  • Page 5: About Lead Free Solder (Pbf)

    TH-103PF10UK/EK 2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).

  • Page 6: Service Navigation

    TH-103PF10UK/EK 3 Service Navigation 3.1. Service Hint...
  • Page 7 TH-103PF10UK/EK Board Name Function Board Name Function Digital Signal Processor, Data Drive (X) Format Converter, Data Drive (Y) Plasma AI Processor Data Drive (Z) Sub-Field Processor Audio Out Slot Interface (Audio / Video / Sync Input Power Switch Switch), Sustain Out (Upper)

  • Page 8: Applicable Signals

    TH-103PF10UK/EK 3.2. Applicable signals...
  • Page 9 TH-103PF10UK/EK...

  • Page 10: Specifications

    TH-103PF10UK/EK 4 Specifications Power Source (UK) 200 V - 240V AC, 50 / 60Hz Power Source (EK) 220 V - 240 V AC, 50 / 60Hz Power Consumption Power on (UK) 1,550 W Power on (EK) 1,500 W Stand-by condition Save OFF 1.0 W, Save ON 0.9 W...

  • Page 11: Service Mode

    TH-103PF10UK/EK 5 Service Mode 5.1. CAT (Computer Aided Test) mode To exit the CAT mode, access the ID mode and switch off the main power. 5.1.1. IIC mode Select the IIC mode by Up / Down button on the remote control at the front page of CAT mode and then press the Action button on the remote control.

  • Page 12: Cd Mode

    TH-103PF10UK/EK 5.1.2. CD mode Select the CD mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 3 seconds. Microcomputer software version (IC4002), this version can be upgrade by 1.

  • Page 13: Ms Mode

    TH-103PF10UK/EK 5.1.4. MS mode Select the MS mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 3 seconds. To exit the MS mode, press the R button on the remote control.

  • Page 14: Id Mode

    TH-103PF10UK/EK 5.1.5. ID mode Select the ID mode by Up / Down button on the remote control at the front page of CAT mode and then press the Mute button on the remote control more than 3 seconds. To exit the ID mode, press the R button on the remote control.

  • Page 15: Iic Mode Structure (Following Items Value Is Sample Data)

    TH-103PF10UK/EK 5.2. IIC mode structure (following items value is sample data)

  • Page 16: Option Setting

    TH-103PF10UK/EK 5.3. Option Setting...
  • Page 17 TH-103PF10UK/EK Option Menu for GPF10D series GPH10D chassis series have special function and operation setting facility called Option Menu. This Option Menu is use- ful for special function required customers. This should be set at the installation stage. Option menus...

  • Page 18: Troubleshooting Guide

    TH-103PF10UK/EK 6 Troubleshooting Guide 6.1. Self Check 6.1.1. Display Indication 1. Self-check is used to automatically check the bus line controlled circuit of the Plasma display. 2. To get into the Self-check mode, press the volume down button on the customer controls at the side of the set, at the same time pressing the OFF-TIMER button on the remote control, and the screen will show.

  • Page 19: Power Led Blinking Timing Chart

    TH-103PF10UK/EK 6.1.2. Power LED Blinking timing chart 1. Subject Information of LED Blinking timing chart. 2. Contents When an abnormality has occurred to the unit, the protection circuit operates and resets to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.

  • Page 20: No Power

    TH-103PF10UK/EK 6.2. No Power First check point There are following 3 states of No Power indication by power LED. 1. No lit. 2. Green is lit then turns red blinking a few seconds later. 3. Only red is lit. 6.3.

  • Page 21: Local Screen Failure

    TH-103PF10UK/EK 6.4. Local screen failure Plasma display may have local area failure on the screen. Fig - 1 is the possible defect P.C.B. for each local area. Fig - 1...

  • Page 22: Disassembly And Assembly Instructions

    TH-103PF10UK/EK 7 Disassembly and Assembly Instructions • To disassemble P.C.B., wait for 1 minute after power was off for discharge from electrolysis capacitors. • marks indicate screw positions. 7.1. Rear Cover and Board Rear Cover required to remove for each board exchange.

  • Page 23: Location Of Rear Cover Screws

    TH-103PF10UK/EK Board Name Rear Cover PB-Board P-Board (MULTI_1) P-Board (SUS_1) P-Board (MULTI_2) P-Board (SUS_2) F-Board PC-Board HX-Board HA-Board DN-Board HDMI-Board (UK) HDD-Board (EK) CD-Board (A) CD-Board (B) CD-Board (C) CD-Board (D) CD-Board (E) CD-Board (F) DR1-Board (A) DR1-Board (B) DR2-Board (A) DR2-Board (B) 7.2.
  • Page 24 TH-103PF10UK/EK 7.2.1. Removal of Rear Cover ( A ) , ×2 2. Remove screws (×21 ) and then remove the Rear Cover ( A ). 1. Remove Eye Bolt Covers. 7.2.2. Removal of Rear Cover ( B ) , ×7 1.
  • Page 25 TH-103PF10UK/EK 7.2.3. Removal of Rear Cover ( C ) 7.2.5. Removal of Rear Cover ( E ) 1. Remove screws (×19 ) and then remove the Rear 1. Remove screws (×25 ) and then remove the Rear Cover ( C ).

  • Page 26: Removal Of Side Angle (L

    TH-103PF10UK/EK 7.3.1. Removal of Side Angle (L) 1. Remove 4 screws (A) of the Plate. 2. Remove screws (×21 ) and then remove the Rear Cover ( F ). 2. Remove 19 screws and then remove the Side Angle (L).

  • Page 27: Removal Of Ha-Board

    TH-103PF10UK/EK 7.3.2. Removal of Side Angle (R) 5. Remove 19 screws and then remove the Side Angle (R). 1. Disconnect the connectors (DS15, SC34). 2. Remove 4 screws, and then side the Side Power Unit upward. 3. Remode the side Power Unit.

  • Page 28: Removal Of Hdmi-Board (Uk)

    TH-103PF10UK/EK 7.5. Removal of HDMI-Board (UK) 7.7. Removal of DS-Board 1. Remove 4 screws (E) and then remove the HDMI Termi- nal Block. 2. Remove 4 screws (F) and remove Shield Plate. 3. Remove 2 Hexagonal-Head screws (G) and then remove HDMI-Board.

  • Page 29: Removal Of Hx-Board

    TH-103PF10UK/EK 7.8. Removal of HX-Board 7.9. Removal of DN-Board 1. Remove the HA Terminal Block. 1. Remove the flexible cables from the connectors (DN1, (Refer to Removal of HA-Board) DN6). 2. Remove the HDMI Terminal Block.(UK) 2. Disconnect the connectors (DN2, DN3, DN5).

  • Page 30: Removal Of H5-Board

    TH-103PF10UK/EK 7.12. Removal of D-Board 7.11. Removal of H5-Board 1. Remove the flexible cables from the connectors (D31, D32, D33, D34, D35, D36). 2. Disconnect the connectors (D3, D5, D20, D25). 3. Remove 4 screws and then remove D-Board. 1. Disconnect a connector (H51).

  • Page 31: Removal Of P-Board (Sus_1), (Sus_2)

    TH-103PF10UK/EK 7.13.1. Removal of P-Board (MULTI_1) 7.14.1. Removal of P-Board (SUS1) 1. Disconnect the connectors (P5, P12, P25, P51, P53, 1. Disconnect the connectors (P2, P9, P52, P54, P56). P55). 2. Remove 10 screws and then remove P-Board (SUS_1). 2. Remove 9 screws and then remove P-Board (MULTI_1).

  • Page 32: Removal Of Pc-Board

    TH-103PF10UK/EK 1. Disconnect the connectors (F1, F8, F9). 1. Remove the Side Angle (R). 2. Remove 5 screws and then remove F-Board. (Refer to Removal of the Side Angle (L), (R) ) 2. Remove 6 screws and then remove the Reinforcement Angle (A).

  • Page 33: Removal Of Sm-Board

    TH-103PF10UK/EK 4. Remove the flexible cables from the connectors (SM1, SM2, SM3, SM4,SM55, SM56). 5. Disconnect the connectors (SM50, SM51). 9. Slide the SU-Board to the bottom direction to remove the SU-Board. 6. Remove 8 screws. 7. Slide SM-Board to the left direction to remove SM-Board from the connectors (SC43, SC46).

  • Page 34: Removal Of Sd-Board

    TH-103PF10UK/EK 7.19. Removal of SD-Board 1. Remove the Side Angle (R). 7. Slide the SD-Board to the upper direction to remove the (Refer to Removal of the Side Angle (L), (R) ) SD-Board. 2. Remove 6 screws and then remove the Reinforcement Angle (B).

  • Page 35: Removal Of Sc2-Board

    TH-103PF10UK/EK 7.22. Removal of S1-Board and V2- Board 6. Disconnect the connectors (SC2, SC20, SC23, SC80, SC81). 7. Remove 16 screws and then remove SC-Board. 7.22.1. Removal of S1-Board 1. Remove the Side Power Unit. (Reference to Removal of the Side Angle (L), (R)) 2.

  • Page 36: Removal Of Ss2-Board

    TH-103PF10UK/EK 7.22.2. Removal of V2-Board 1. Removal the S1-Board (Refer to Removal of the S1-Board and V2-Board) 2. Remove 4 screws (Q). 3. Disconnect the connector (V15) and then remove V2- Board. 5. Remove the flexible cables from the connectors (SS29, SS30,SS51, SS52, SS53, SS54).

  • Page 37: Removal Of Ss-Board

    TH-103PF10UK/EK 9. Remove 6 screws and then remove SS3-Board. 7.25. Removal of SS-Board 4. Remove 2 screws ( ) and then remove the Rear Cover Angle (H). 5. Remove 2 Eye Bolt Covers. 6. Remove 5 screws ( ) and then remove the Rear Cover Angle (F).

  • Page 38: Removal Of Fan

    TH-103PF10UK/EK 7.26. Removal of Fan 1. Disconnect the Fan relay connectors. 2. Remove each 4 screws of Fan Block (A), (B), (E), (H), (J) and then remove the Fan Blocks. 3. Remove each 4 screws of Fan (C), (F), (G) and then remove the Fans.

  • Page 39: Removal Of C1-Board

    TH-103PF10UK/EK 3. Remove 4 screws of the flexible cable. 4. Disconnect the connector (C14). 5. Remove the flexible cables from the connectors (CA1, CA2, C11). Note: • The Sponge (of Fans) is not re-useable. Please use a new one when Fan exchange.

  • Page 40: Removal Of C3-Board

    TH-103PF10UK/EK 1. Remove the Eye Bolt. 2. Remove 5 screws and then remove the Rear Cover Angle (C). 4. Remove the Reinforcement Angle (A). (Refer to Removal of C1-Board) 5. Remove 6 screws of the flexible cable. 3. Remove 6 screws and then remove the Reinforcement 6.

  • Page 41: Removal Of C4-Board

    TH-103PF10UK/EK 7.30. Removal of C4-Board 2. Remove 15 screws ( ) and then remove the Fan (C), (D) and Fan Block (E), (F). 3. Remove 5 screws ( ) and then remove the Rear Cover Angle (E). 1. Remove the Eye Bolt.

  • Page 42: Removal Of C6-Board

    TH-103PF10UK/EK 7.33. Removal of C7-Board 7.32. Removal of C6-Board 1. Remove 7 screws and then remove the Fan Block (G) and Fan (K). 1. Remove the Eye Bolt. (Refer to Removal of C3-Board) 2. Remove the Fan (D). (Refer to Removal of C5-Board) 3.

  • Page 43: Removal Of C8-Board

    TH-103PF10UK/EK 6. Disconnect the connectors (C82, C84, C88). 7. Remove 6 screws and then remove C8-Board. 7. Remove 4 screws of the flexible cable. 8. Remove the flexible cables from the connectors (CB15, CB16, C71). 9. Disconnect the connector (C74).

  • Page 44: Removal Of Cx-Board

    TH-103PF10UK/EK 5. Disconnect the connector (CX4). 4. Remove 6 screws of the flexible cable. 5. Remove the flexible cables from the connectors ( C90, C91, C93,CB9, CB10, CB11). 6. Remove 5 screws and then remove CX-Board. 6. Disconnect the connectors (C92, C94).

  • Page 45: Removal Of Cz-Board

    TH-103PF10UK/EK 4. Remove the flexible cables from the connectors (CB1, 5. Remove 6 screws ( ) and then remove the Reinforce- CB2, CZ1). ment Angle (B). 5. Remove 4 screws and then remove CZ-Board. 6. Remove 6 screws of the flexible cable.

  • Page 46: Removal Of Dr1-Board (B)

    TH-103PF10UK/EK 7.40. Removal of DR1-Board (B) 7.42. Removal of DR2-Board (B) Attaching short jumper to connector (DR6). Attaching short jumper to connector (DR16). Attach Short Jumper to the connector (DR6) when replacing Attach Short Jumper to the connector (DR16) when replacing DR1-Board.

  • Page 47: Removal Of Cd-Board

    TH-103PF10UK/EK 7.43. Removal of CD-Board 7.43.3. Removal of CD-Board (C) 1. Remove the flexible cables from the connectors (CD1, CD2). 2. Remove 2 screws and then remove CD-Board (C). 7.43.1. Removal of CD-Board (A) 1. Remove the flexible cables from the connectors (CD1, 7.43.4.

  • Page 48: Removal Of Ac Inlet

    TH-103PF10UK/EK 2. Remove the flexible cables from the connectors (CD1, 2. Disconnect a connector (F1). CD2). 3. Remove 3 screws and then remove the AC-Inlet. 3. Remove 2 screws and then remove CD-Board (E). 7.45. Removal of Cabinet and Front Glass 7.43.6.
  • Page 49 TH-103PF10UK/EK • Be sure to lift the instruction six positions of the figure, when remove the Front Glass. (Note) • When removing the Cabinet with Front Glass, take Note: When replacing the Front Glass care not to damage the flexible cable of the Plasma •...
  • Page 50 TH-103PF10UK/EK Removal of Cabinet 7.45.2.2. Removeval of Cabinet Bottom 7.45.2. 1. Remove the Front Glass. 1. Remove each 5 screws ( ) (Refer to Removal of Front Glass.) 2. Remove each 2 screws ( ) and then remove the Con- nection Angles (A), (AS), (B), (BS).

  • Page 51: Removal Of V1-Board And V3-Board

    TH-103PF10UK/EK 7.45.2.4. Removeval of Cabinet Left 1. Remove each 5 screws ( ). 2. Remove each 2 screws ( ) and then remove the Con- nection Angles (A), (AS), (B), (BS). 7.47. Removal of Plasma Panel 1. Remove the Rear Covers.
  • Page 52 TH-103PF10UK/EK 5. Remove 4 screws (T) of the Plate. 10. Disconnect the each Fan relay connectors. • Remove each 4 screws and then remove the Fan Blocks (A), (B), (E), (F), (G), (H), (J). • Remove each 4 screws and then remove the Fan (C).

  • Page 53: P53, P55)

    TH-103PF10UK/EK 15. Remove the flexible cables from the connectors (DN1, 22. Disconnect the connector (H51). DN6). 16. Disconnect the connectors (DN2, DN3, DN5). 17. Remove 6 screws and then remove DN-Board Block. 23. Disconnect the connectors (P2, P5, P9, P12, P25, P51, P53, P55).
  • Page 54 TH-103PF10UK/EK 27. Disconnect the connectors ( SC13, SC14, SC34, SC83, 35. Remove 6 screws and then remove the Fixed Angle. SC84). 28. Remove 4 screws and then remove SC2-Board. 36. Disconnect a connector (CY0) connected with CY-Board. 37. Remove 2 screws and then remove CD-Board (F).
  • Page 55 TH-103PF10UK/EK 40. Remove 4 screws and then remove CD-Board (B), (C). 44. Remove 4 screws and then remove CD-Board (D), (E). 41. Remove each 1 screw ( ) and then remove the Flexible Holders (6 places). 42. Remove each 6 screws ( ) and then remove the Fixed Angles (2 places).
  • Page 56 TH-103PF10UK/EK 49. Remove the PB-Board. 50. Remove 2 screws and then remove AC Inlet Cover. 51. Remove 3 screws and then remove the AC-Inlet. 52. Remove the Plasma Panel. (Note) • When replacing the Plasma Panel, use a hanging device (machine) such as cranes, because the Plasma Panel is too heavy.
  • Page 57 TH-103PF10UK/EK Structure of replacement Plasma Panel (Spare Parts)

  • Page 58: Measurements And Adjustments

    TH-103PF10UK/EK 8 Measurements and Adjustments 8.1. Adjustment Procedure 8.1.1. Driver Set-up 8.1.1.1. Item / Preparation 1. Set Aging pattern 1 (White pattern) by IIC mode. 2. Set the picture adjustment items as follows. • Picture menu : Standard • Color temperature : Normal •...

  • Page 59: Initialization Pulse Adjust

    TH-103PF10UK/EK 8.1.2. Initialization Pulse Adjust 1. Set Aging pattern 1 (White pattern) by IIC mode. 2. Set the picture adjustment items as follows. • Picture menu : Standard • Color temperature : Normal • Picture : 25 • Aspect : Full 3.
  • Page 60 TH-103PF10UK/EK 8.1.3. P.C.B. (Print Circuit Board) Replacement 8.1.3.1. Caution 1. To remove P.C.B., wait 1 minute after power was off for discharge from electrolysis capacitors. 8.1.3.2. Quick adjustment after P.C.B. Replacement Adjust the following voltages with the multimeter. P.C.B. Name...
  • Page 61 TH-103PF10UK/EK 8.1.4. Adjustment Volume Location 8.1.5. Test Point Location...

  • Page 62: Adjustment

    TH-103PF10UK/EK 8.2. Adjustment 8.2.1. RGB white balance adjustment Instrument Name Connection Remarks • RGB VGA W / B pattern PC input User setting: Normal • Color analyzer (Minolta CA-100 or equivalent) Panel surface (Picture menu: Standard) Procedure Remarks • Ensure aging is adequate.
  • Page 63 TH-103PF10UK/EK...

  • Page 64: Hd White Balance Adjustment

    TH-103PF10UK/EK 8.2.2. HD white balance adjustment Instrument Name Connection Remarks • HD W / B pattern (COMPONENT Output) PC input User setting: Normal • Color analyzer (Minolta CA-100 or equivalent) Panel surface (Picture menu: Standard) Procedure Remarks • Ensure aging is adequate.
  • Page 65 TH-103PF10UK/EK...

  • Page 66: Power Control Adjustment

    TH-103PF10UK/EK 8.2.3. Power control adjustment Instrument Name Connection Remarks • PC (RGB) signal generator • PC input Set “RGB” at ‘COMPONENT / RGB-IN (Leader: VGA / No.9 signal) SELECT’ in Setup Menu. • Connect the AC power of the adjust- •...

  • Page 67: Block Diagram

    TH-103PF10UK/EK 9 Block Diagram 9.1. DiagramNote...

  • Page 68: Main (1 Of 2) Block Diagram

    TH-103PF10UK/EK 9.2. Main (1 of 2) Block Diagram D.D. D.D. D.D. D.D. D.D. D.D. D.D. D.D. SCAN OUT Vda_LU(+78V) Vda_LU(+78V) P+75V(Vda) P+75V(Vda) DATA DRIVER(2) DATA DRIVER(1) +78V(Vda) Vda_CONT DATA DRIVER(3) GENE SOS7 Vda DET ENERGY RECOVERY DIGITAL FIFO SC23 SIGNAL...

  • Page 69: Main (2 Of 2) Block Diagram

    TH-103PF10UK/EK 9.3. Main (2 of 2) Block Diagram D.D. D.D. D.D. D.D. D.D. D.D. D.D. D.D. SUSTAIN Vda_RU(+78V) Vda_RU(+78V) P+75V(Vda) P+75V(Vda) DATA DRIVER(4) DATA DRIVER(5) DATA DRIVER(6) DR13 Vda_RU(+78V) DR14 P+75V(Vda) +78V(Vda) Vda_CONT GENE DR12 Vda DET SOS7 DR15 ENERGY...

  • Page 70: P-Board (1 Of 2) And F-Board Block Diagram

    TH-103PF10UK/EK 9.4. P-Board (1 of 2) and F-Board Block Diagram TO SC2 (SC SIDE) COLD TO SS2 D1605 D1609 (SS SIDE) RF1601 3A Vsus Vsus Vsus D1606 Vsus F201 T201 TO F9 D251 R254 VSUS TO SC82 L1604 (SC SIDE)

  • Page 71: P-Board (2 Of 2) Block Diagram

    TH-103PF10UK/EK 9.5. P-Board (2 of 2) Block Diagram MC401 Vda CONTROL MODULE RF1701 3A RECTIFIER Q405 Q406 TO P52 K1702 D1703 K1701 F1701 D1704 D1711 F301 L1702 L1701 IC01 AC_L D402 <K5D502BNA007> D1705 Q301 T301 R1761 R1740 R528 Q303 L1705...

  • Page 72: Ha, Hx, Pc, Pb, V1, V2 And V3-Board Block Diagram

    TH-103PF10UK/EK 9.6. HA, HX, PC, PB, V1, V2 and V3-Board Block Diagram POWER CONTROL FAN CONTROL IC850 REGULATOR <TNPA4041> FAN (120) <L6FAYYYH0031> TO P25 HA COMPONENT VIDEO VOLTAGE (Exchange board only) (P-BOARD SS SIDE) CONTROL <TXNHA10RBS> D874 (Exchange board only)

  • Page 73: Hdmi-Board (1 Of 2) Block Diagram

    TH-103PF10UK/EK 9.7. HDMI-Board (1 of 2) Block Diagram IC3301 IC3326 IC3302 EEPROM BUFFER EEPROM EDID B EDID B For FHD D3328 +3.3VHDMI For HD HDMI OUT_Y 5V_B IN A IC3308 HPDT D3327 Q3307 +3.3VHDMI MAIN 1.8V DDCG SDAB SCLB N.C.

  • Page 74: Hdmi-Board (2 Of 2) Block Diagram

    TH-103PF10UK/EK 9.8. HDMI-Board (2 of 2) Block Diagram FACTORY +5VSTB HDMI DIGITAL SIGNAL PROCESSOR IC3319 MICOM SLOT_SRQ VCC 8 CONFIG SLOT_SDA IC3339 HDMI INTERFACE SLOT_SCL CMD_SCL DC-DC CONVERTER +15V TVLOAD_CMD_SCL <TXNHHH10XXT> 15V->3.3V CMD_SDA TVLOAD_CMD_SDA IC3321 (Exchange board only) SLOT_SCL SLOT_SCL...

  • Page 75: Hdd-Board Block Diagram

    TH-103PF10UK/EK 9.9. HDD-Board Block Diagram DVI-D IN <TNPA4052> JK3501 (Exchange board only) AUDIO_R Q3501 DVI-D AUDIO IN AUDIO_L Q3511 TO DS12 +3.3V SLOT3.3V SLOT3.3V SLOT5V ODD_B0-B7 SLOT5V SLOT9V SLOT9V STB+5V STB5V LAN15V LAN+15V LAN+15V PLUGDET AUDIO_R AUDIO IN R AUDIO_L...

  • Page 76: Ds-Board (1 Of 2) And H3-Board Block Diagram

    TH-103PF10UK/EK 9.10. DS-Board (1 of 2) and H3-Board Block Diagram STB3.3V SLOT INTERFACE D_3.3V IC3008 SYNC PROCESSOR IIC ON/OFF SOUND PROCESSOR S_CLOCK3 <TNPA4386> S_DATA3 (Exchange board only) TO P5 RESET (P-BOARD SC SIDE) SOUND MUTE +15V +15V AUDIO L +15V...

  • Page 77: Ds-Board (2 Of 2) Block Diagram

    TX3- STBY5V_S RXD_S3 TX0- B_ED- LEVEL SHIFT IC3151 TX3+ TX4- B_ED+ TX4- TX0G 3.3V<=>5V B_EE- ETX_G1 TX4+ B_EE+ LEVEL SHIFT DS12 DS13 SLOT2 SLOT3 H1(HDMI) H1(HA) TH-103PF10UK/EK DS-Board (2 of 2) Block Diagram TH-103PF10UK/EK DS-Board (2 of 2) Block Diagram...

  • Page 78: Dn-Board (1 Of 2) Block Diagram

    TH-103PF10UK/EK 9.12. DN-Board (1 of 2) Block Diagram +3.3V +1.2V +3.3V IC4609 10bit_RGB VIDEO SIGNAL IC4606 CABLE 5V_M P+5V A/D CONVERTER(MAIN) <TSXL585> VIDEO BUFFER RE0-9 TO DS1 RE0-9(10bit) AD_R0-R9 GE0-9 Pr/R IN AD_G0-G9 R/G/B R/PR-M OUT1 BE0-9 G/Y -M OUT2...

  • Page 79: Dn-Board (2 Of 2) Block Diagram

    TH-103PF10UK/EK 9.13. DN-Board (2 of 2) Block Diagram +1.2V +2.5V +3.3V IC4309 IC5303 VCCK STB+5V STB 3.3V DDR_SDRAM1 DDR_SD-RAM STB+3.3V IC4305 IC4901 +2.5V INTERFACE RGB IN PORT1 I-CHIPS PORT1 OUT VOUT DC-DC CONVERTER DC-DC CONVERTER SD-RAM1 DATA DQ1-DQ31 (60bit) P+15V...

  • Page 80: D-Board (1 Of 2) Block Diagram

    TH-103PF10UK/EK 9.14. D-Board (1 of 2) Block Diagram DIGITAL SIGNAL PROCESSOR FORMAT CONVERTER PLASMA AI SUB-FIELD PROCESSOR PICTURE OUTPUT<R> <TZTNP010XAT> R 10bit R10-R19(R) (Exchange board only) G 10bit G10-G19(R) TO DN5 B 10bit B10-B19(R) E+LVDS0 (RX_TA+) E-LVDS0 (RX_TA-) E+LVDS1 (RX_TB+)

  • Page 81: D-Board (2 Of 2) Block Diagram

    TH-103PF10UK/EK 9.15. D-Board (2 of 2) Block Diagram CABLE <TSXL568>(D31-CD1) <TSXL569>(C20-CD2) R-UP IC9401 TO C10 DIGITAL SIGNAL PROCESSOR/FORMAT CONVERTER DDR SDRAM<R>(128M) 30bit UA06-UC15<R> DOUTU31C PLASMA AI/SUB-FIELD PROCESSOR IC9400 PD1-M<RIGHT> <TZTNP010XAT> FORMAT CONVERTER/RGB PROCESSOR<R> PLASMA AI/SUB FIELD PROCESSOR/DATA DRIVER<R> DOUTU22A DRVCLKU0-U3,DRVCLKD0-D3<R>...

  • Page 82: C1, C2, Cy And Cz-Board Block Diagram

    TH-103PF10UK/EK 9.16. C1, C2, CY and CZ-Board Block Diagram DOUTU31C - DOUTU22A CABLE <TSXL568>(D31-CD1) <TSXL569>(C20-CD2) TO DR3 TO D31 (DR1-BOARD SC SIDE) (Via CD-BOARD) 23,30,31 29,43 41,42,49 CABLE DATA DATA DATA DATA <TSXL518> 8bit 6bit 8bit 8bit UA28, UA22 UA26...

  • Page 83: C2, C3, Cx And Cy-Board Block Diagram

    TH-103PF10UK/EK 9.17. C2, C3, CX and CY-Board Block Diagram TO DR4 TO DR2 TO DR5 (DR1-BOARD (DR1-BOARD (DR1-BOARD SC SIDE) SC SIDE) SC SIDE) 15 14 CABLE <TSXL518> CABLE P75V_R 78V_RU P75V_R 78V_RU <TSXL518> TO C41 P+5V DRVSOS7U_R DRVSOS7 DOUTUA16...

  • Page 84: C4, C5, C8 And C9-Board Block Diagram

    TH-103PF10UK/EK 9.18. C4, C5, C8 and C9-Board Block Diagram DOUTUC21 - DOUTUA10 CABLE DOUTUC9 - DOUTUA0 CABLE <TSXL570>(D32-CD1) <TSXL572>(D33-CD1) <TSXL571>(C40-CD2) TO PC204 <TSXL571>(C50-CD2) TO DR15 TO D32 TO D33 (DR2-BOARD (Via CD-BOARD) SS SIDE) (Via CD-BOARD) 19,22,23 21,25 19,22 41,42,45...

  • Page 85: C5, C6, C7 And C8-Board Block Diagram

    TH-103PF10UK/EK 9.19. C5, C6, C7 and C8-Board Block Diagram TO DR12 TO DR14 TO DR13 (DR1-BOARD SS SIDE) (DR2-BOARD SS SIDE) (DR2-BOARD SS SIDE) 6-11 6-11 CABLE DATA <TSXL518> 6bit DOUTUA0 P75V_L 78V_LU DATA 12bit DA0-DC3 DATA 12bit DA0-DC3 P75V_L...

  • Page 86: Sc2 And S1-Board Block Diagram

    TH-103PF10UK/EK 9.20. SC2 and S1-Board Block Diagram S1 POWER SW <TNPA4084> DC-DC CONVERTER (Exchange board only) FOR SCAN DRIVE TO DR1 <TNPA4034> (DR1-BOARD SC SIDE) Vda75V (Exchange board only) Vda75V Vda75V PUSH Vda75V STB PS STB_12V +15V SW061 POWER SW...

  • Page 87: Sc-Board Block Diagram

    TH-103PF10UK/EK 9.21. SC-Board Block Diagram TO SU49 SCAN DRIVE TPSC1 SIGNAL WAVE TO P2 VSET FSIU FSIU (P-BOARD VSUS <TNPA4033> TPVSUS FCLU SC SIDE) FCLU 185V Vsus FCLKU (Exchange board only) VSUS FCLKU PROU PROU 15V_F IC6725 Vf+5V IC6726 TO P23...

  • Page 88: Su, Sm And Sd-Board Block Diagram

    TH-103PF10UK/EK 9.22. SU, SM and SD-Board Block Diagram VDDH VDDH VDDH IC6901 IC6913 IC6925 30bit 30bit 30bit VDDH VDDH VDDH IC6902 IC6914 IC6926 LINE LINE LINE 30bit 30bit 30bit BRIDGE CONNECTOR <K1LA23BA0003> VDDH VDDH VDDH IC6903 IC6915 IC6927 TO SM55...

  • Page 89: Ss, Ss2 And Ss3-Board Block Diagram

    TH-103PF10UK/EK 9.23. SS, SS2 and SS3-Board Block Diagram TO P2 TO P12 (P-BOARD (P-BOARD SS SIDE) SS SIDE) SS51 Q6001-Q6006 OUTPUT TPVSUS Q6141- Vsus Gen. Q6144 SS52 BUFFER Q6007-Q6012 IC6131 SS2 SUSTAIN OUT OUTPUT TP15V Q6151- TO DR11 Q6154 FET DRIVER OUTPUT <TNPA4036>...

  • Page 90: Dr1, Dr2 And Cd-Board Block Diagram

    TH-103PF10UK/EK 9.24. DR1, DR2 and CD-Board Block Diagram C14(SC SIDE) C74(SS SIDE) ENERGY DATA ENERGY DATA Vda75V(P75V) Q7984-Q7988 Vda75V(P75V) RECOVERY OUTPUT Q7901- 78V Gen. Vda75V(P75V) CD C-BOARD/D-BOARD CONNECTION Q7904 <TNPA4039> TPDR Vda75V(P75V) BUFFER IC7851 DMHR (Exchange board only) <TNPA4040> 78V(Vda-RD/LU)

  • Page 91: Wiring Connection Diagram

    JK3001 JK3002 JK3501 JK3513 JK3511 JK3509 HDMI IN A HDMI IN B DVI-D IN DVI-D AUDIO IN AUDIO IN RS-232C TH-103PF10UK/EK PC AUDIO IN PC IN COMPONENT VIDEO IN TH-103PF10UK/EK Interconnection (1 of 8) Diagram Interconnection (1 of 8) Diagram...

  • Page 92: Interconnection (2 Of 8) Diagram

    TH-103PF10UK/EK 10.2. Interconnection (2 of 8) Diagram CABLE TO DS6 <TSXL584> E+LVDS0 E-LVDS0 E+LVDS1 E-LVDS1 CABLE E+LVDS2 <TSXL585> E-LVDS2 E+LVDS3 E-LVDS3 E+LVDS4 E-LVDS4 E+LVDSCLK TO D5 E-LVDSCLK LVDS_DET TO DS1 O+LVDSCLK HD_M O-LVDSCLK VD_M O+LVDS0 O-LVDS0 B/PB_M O+LVDS1 G/Y_M O-LVDS1...

  • Page 93: Interconnection (3 Of 8) Diagram

    TH-103PF10UK/EK 10.3. Interconnection (3 of 8) Diagram SCAN OUT (UPPER) <TNPA4030> (Exchange board only) A1-A54 SC41(SC41-SU41) SC42(SC42-SU42) B1-B54 Vsus TO P2 (SC SIDE) SC23 Vf+5V Vf+5V A1-A54 B1-B54 Vf+5V Vf+5V P+15V TO P23 P+15V (SC SIDE) Vscn Vscn Vscn Vscn...

  • Page 94: Interconnection (4 Of 8) Diagram

    TH-103PF10UK/EK 10.4. Interconnection (4 of 8) Diagram UK : AC 240V, 50 / 60Hz EK : AC 220-240V, 50 / 60Hz NEUTRAL AC CORD LINE FILTER UK : <K2CG3YY00011> LIVE <TNPA4055> EK : <K2CN3YY00003> <K2CT3YY00002> AC INLET ASSY (Exchange board only) <TXAJS01YLTJ>...

  • Page 95: Interconnection (5 Of 8) Diagram

    TH-103PF10UK/EK 10.5. Interconnection (5 of 8) Diagram Vda_RU(+78V) DOUTUC[28] CLKU[6](+) Vda_RU(+78V) 1-68 1-68 1-68 1-68 1-68 Vda_RU(+78V) DOUTUA[29] CLKU[7](-) E+ LVDS0 Vda_RU(+78V) DOUTUB[29] DOUTUB[31] E- LVDS0 Vda_RU(+78V) DOUTUC[29] CLRU1 C1 DATA DRIVER (1) DOUTUA[31] DSLR DOUTUC[24] PCU1 CLKU7(-) DOUTUB[24] E+ LVDS1 <TNPA4018>...

  • Page 96: Interconnection (6 Of 8) Diagram

    TH-103PF10UK/EK 10.6. Interconnection (6 of 8) Diagram CA10 CA11 DOUTUA[16] DOUTUA[21] 1-68 1-68 1-68 1-68 1-68 1-68 DOUTUB[16] DOUTUB[21] DOUTUC[16] DOUTUC[21] Vda_RU(+78V) Vda_RU(+78V) C3 DATA DRIVER (3) DOUTUA[17] CLKU4(+) Vda_RU(+78V) P+5V DOUTUB[20] CLKU4(+) DOUTUB[17] Vda_RU(+78V) CLRU3 P+5V DOUTUA[20] DOUTUC[13] <TNPA4020>...

  • Page 97: Interconnection (7 Of 8) Diagram

    TH-103PF10UK/EK 10.7. Interconnection (7 of 8) Diagram CA12 CA13 CA14 Vda_LU(+78V) Vda_LU(+78V) PCU6 1-68 1-68 1-68 Vda_LU(+78V) Vda_LU(+78V) CLRU5 DOUTUB[9] CLKU0(+) C4 DATA DRIVER (4) Vda_LU(+78V) PCU5 DOUTUA[9] DOUTUC[2] C5 DATA DRIVER (5) Vda_LU(+78V) LEU5 DOUTUB[2] <TNPA4021> Vda_LU(+78V) ODEU5 DOUTUC[8] DOUTUA[2] <TNPA4022>...

  • Page 98: Interconnection (8 Of 8) Diagram

    TH-103PF10UK/EK 10.8. Interconnection (8 of 8) Diagram SS51 1-13 SS2 SUSTAIN OUT(UPPER) DR13 P+75V(Vda) CA15 CA16 <TNPA4036> P+75V(Vda) 1-68 1-68 P+75V(Vda) (Exchange board only) SS52 ENERGY DATA RECOVERY Vda_LU(+78V) DOUTUC[3] CLKU[0](+) P+75V(Vda) Vda_LU(+78V) <TNPA4100> Vda_LU(+78V) DOUTUA[2] CLKU[1](-) Vda_LU(+78V) (Exchange board only)

  • Page 99: Lead Wiring (1)

    TH-103PF10UK/EK 10.9. Lead Wiring (1)

  • Page 100: Lead Wiring (2)

    TH-103PF10UK/EK 10.10. Lead Wiring (2)

  • Page 101: Lead Wiring (3)

    TH-103PF10UK/EK 10.11. Lead Wiring (3)

  • Page 102: Lead Wiring (4)

    TH-103PF10UK/EK 10.12. Lead Wiring (4)
  • Page 103 TH-103PF10UK/EK 10.13. Lead Wiring (5)
  • Page 104 TH-103PF10UK/EK 10.14. Lead Wiring (6)
  • Page 105 TH-103PF10UK/EK 10.15. Lead Wiring (7)
  • Page 106 TH-103PF10UK/EK 10.16. Lead Wiring (8)
  • Page 107 TH-103PF10UK/EK 10.17. Lead Wiring (9)
  • Page 108 Model No. : TH-103PF10UK/EK Caution...
  • Page 109 Model No. : TH-103PF10UK/EK Exploded View...
  • Page 110 Model No. : TH-103PF10UK/EK Cabinet part location...
  • Page 111 Model No. : TH-103PF10UK/EK Side Power part location...
  • Page 112 Model No. : TH-103PF10UK/EK Fan part location...
  • Page 113 Model No. : TH-103PF10UK/EK Rear cover location...
  • Page 114 Model No. : TH-103PF10UK/EK Cable relation...
  • Page 115 Model No. : TH-103PF10UK/EK Board and Fuse...
  • Page 116 Model No. : TH-103PF10UK/EK Packing summary (1)
  • Page 117 Model No. : TH-103PF10UK/EK Packing summary (2)
  • Page 118 Model No. : TH-103PF10UK/EK Packing summary (3)
  • Page 119 Model No. : TH-103PF10UK/EK Packing summary (4)
  • Page 120 Model No. : TH-103PF10UK/EK Packing summary (5)
  • Page 121 Model No. : TH-103PF10UK/EK Packing summary (6)
  • Page 122 Model No. : TH-103PF10UK/EK Packing summary (7)
  • Page 123 Model No. : TH-103PF10UK/EK Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks EUR7636070R REMOTE CONTROLLER 1 UK EUR7636090R REMOTE CONTROLLER 1 EK K2CG3YY00011 AC CORD 1 UK K2CN3YY00003 AC CORD (E) 1 EK K2CT3YY00002 AC CORD (B)
  • Page 124 Model No. : TH-103PF10UK/EK Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TMM17499 CLAMPER TMM6428-1 CLAMPER TMM6463-1 CLAMPER TMM6496-1 CLAMPER TMM7464-2 CLAMPER TMM7468-1 CLAMPER 5 UK TMM7468-1 CLAMPER 6 EK TMME047 CLAMPER TMME185 CLAMPER TMME190 CLAMPER...
  • Page 125 Model No. : TH-103PF10UK/EK Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TQBC2245 INSTRUCTION BOOK(FRANCH) 1 UK TQB0E0481A INSTRUCTION BOOK(GERMAN) 1 PAVCCZ EK TQB0E0481B INSTRUCTION BOOK(DUTCH) 1 PAVCCZ EK TQB0E0481C INSTRUCTION BOOK(ITALIAN) 1 PAVCCZ EK TQB0E0481D...
  • Page 126 Model No. : TH-103PF10UK/EK Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks XTV3+8JFJK SCREW XTW3+8TFJ SCREW XVN16FJ EYE BOLT XWB16BVJ M16 SPRING WASHER XYN3+F10FJ SCREW XYN3+F8FJ SCREW XYN3+J12FJ SCREW XYN3+J8FJ SCREW XYN4+F10FJ SCREW XYN4+F10FJK SCREW XYN4+F32FJ...
  • Page 127 Model No. : TH-103PF10UK/EK Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TNPA4037 CIRCUIT BOARD SS3 TNPA4039 CIRCUIT BOARD DR1 TNPA4040 CIRCUIT BOARD CD TNPA4041 CIRCUIT BOARD PC TNPA4055 CIRCUIT BOARD F TNPA4058 CIRCUIT BOARD H5...

This manual is also suitable for:

Th-103pf10ek

Table of Contents