Advertisement
Quick Links
®
equIP
Series S
3-inch/4-inch Minidome Camera
Wall Mounts Installation Guide
For more flexibility Honeywell offers these optional wall-mount kits.
This guide is for installers and integrators.
3-inch Minidome Installation
3-inch Minidome Camera Wall Mount Kit
H3SIP-WK, the 3-inch camera wall mount kit, includes the following components:
M4x8 P Head
Mechnical Screw
x6
M3x9.5 P Head
Mechanical Screw
x1
Note
This guide describes how to install the 3-inch and 4-inch minidome cameras with
their appropriate wall mounts. More thorough installation instructions for your
camera are found in the Quick Installation Guide that came with your camera.
Figure 1
H3SIP-WK: 3-inch Minidome Wall Mount Kit
3-inch Minidome Pendant Mount
Pendant Arm Cover
Silicone Rubber Ring
Pendant Arm
Document 800-16795 – Rev A – 02/2014
Advertisement
Related Manuals for Honeywell equIP Series S
Summary of Contents for Honeywell equIP Series S
- Page 1 Series S 3-inch/4-inch Minidome Camera Wall Mounts Installation Guide For more flexibility Honeywell offers these optional wall-mount kits. This guide is for installers and integrators. Note This guide describes how to install the 3-inch and 4-inch minidome cameras with their appropriate wall mounts.
-
Page 2: Preparing For Installation
2 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide Preparing for Installation Check the package contents: Before you begin, check that you have received all of the parts listed below. If any parts are missing or damaged, contact your dealer immediately. - Page 3 Figure 3 Loosening the Captive Screws Use a Phillips screwdriver (not supplied) to loosen the screw that secures the camera assembly to the camera housing. Figure 4 Loosening the Screw That Secure the Camera Assembly to the Housing Press and hold the tabs on either side of the camera assembly while pulling it from the minidome camera’s base.
- Page 4 4 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide Thread the RJ45/PoE ethernet cable through the pendant arm. Figure 6 Threading the Ethernet Cable Through the Pendant Arm Use appropriate screws (not supplied) to securely fasten the pendant arm to the wall.
-
Page 5: Installing The Camera
Attaching the Camera Base to the Pendant Mount Use the four supplied M4x8 machine screws to securely attach the camera base to the pendant mount. Figure 8 Attaching the Base to the Pendant Mount Screws Figure 9 Camera Base Installed on the Pendant Arm Installing the Camera Note (Optional) If you want to use a microSDHC card to record video clips, then insert... - Page 6 6 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide Snap the camera assembly into place. Line up the tabs on the camera assembly with the guides on the camera base that is attached to the pendant arm. Slide the camera assembly onto the camera base until the tabs lock securely in place.
- Page 7 4-inch Minidome Installation 4-inch Minidome Camera Wall Mount Kit H4SIP-WK, the 4-inch camera wall mount kit, includes the following components: Figure 12 H4SIP-WK: 4-inch Minidome Wall Mount Kit 4-inch Minidome Pendant Mount M4x8 P Head Silicone Rubber Ring + Sunshield Mechanical Screw M3x9.5 P Head Mechanical Screw...
- Page 8 8 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide H4SIP-WK Figure 13 Pendant Arm Dimensions • Pendant Mount+Sunshield • Pendant Arm (including the Pendant Arm Cover) • Silicone Rubber Ring (x1) • M4x8 P Head Mechanical Screws (x2) •...
- Page 9 Use a Phillips screwdriver to loosen the screw that attaches the anti-drop chain on the dome cover to the camera base. Remove the cover and set it aside. Figure 15 Loosening the Screw that Attaches the Anti-drop Chain Remove the turret cover from the camera assembly. Press both sides of the turret cover to release it from the camera assembly.
- Page 10 10 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide Preparing the Wall for the Pendant Arm Use the pendant arm to mark holes on the mounting surface for the mounting screws. Use an appropriate drill bit to drill holes for the pendant arm mounting screws. Also drill an appropriately sized hole in the mounting surface for the RJ45 cable.
- Page 11 | 11 Securely fasten the pendant arm to a mounting surface. • Use appropriate screws (not supplied) to securely fasten the pendant arm to the wall, which you prepared in Preparing the Wall for the Pendant Arm. • Use appropriate screws, nuts, and washers (not supplied) to securely fasten the pendant arm to the pole mount, which you prepared in Preparing the Pole for the Pendant...
- Page 12 12 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide Figure 20 Pendant Arm with the 4-inch Pendant Mount+Sunshield Attached Installing the Camera Note (Optional) If you want to use a microSDHC card to record video clips, then insert the microSDHC card into the card slot located at the base of the camera assembly before installing the camera assembly into the camera base.
- Page 13 | 13 Figure 21 Installing the Snap-on Camera into the Pendant Mount+Sunshield Secure the camera assembly in place by tightening the securing screw that was loosened step 4 Removing the Camera Assembly from the Camera Housing page Figure 22 Securing the Camera Assembly in the Pendant Mount+Sunshield Connect the RJ45 cable to the camera assembly to access the camera for viewing video, and then adjust the minidome camera lens to a desired angle.
- Page 14 14 | equIP Series S Cameras 3-Inch/4-Inch Minidome Camera Wall Mounts Installation Guide Note Refer to the Quick Installation Guide that came with your camera for instructions about the other camera connections. Replace the camera’s turret cover. Ensure that is snaps securely into place.
- Page 15 | 15 Figure 26 Securing the Outdoor Cover in Place 800-16795 - A - 02/2014...
- Page 16 Document 800-16795 – Rev A – 02/2014 © 2014 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof.