Table of Contents
Advertisement
Adjusting the Motion-Control
Damper
The top damper mounting bolt can be adjusted to obtain a
more desired motion-control lever resistance. See
for mounting options.
Figure 68
RH Motion Control Shown
1. Torque the locknut to 200 in-lb (16.7 ft-lb). The bolt must
protrude past end of locknut after torque.
2. Most resistance (firmest feel)
3. Damper
4. Medium resistance (medium feel)
5. Least resistance (softest feel)
Adjusting the Motion-Control
Neutral-Lock Pivot
The flanged nut can be adjusted to obtain a more desired
motion-control lever resistance when moving it to the
neutral-lock position. See
1. Loosen the jam nut.
2. Tighten or loosen the flanged nut to the desired feel.
For more resistance, tighten the flanged nut.
For less resistance, loosen the flanged nut
3. Tighten jam nut.
Figure 68
Figure 69
for adjustment options.
1. Flanged nut
47
Figure 69
2. Jam nut
- Quick Links:
- Specifications
- Schematics
Hide quick links:
Advertisement
Table of Contents
