Miele HS15 Operating Instructions Manual page 31

Hide thumbs Also See for HS15:

Table of Contents

Available languages

Do not pull or carry the appliance by the cable, and be

careful not to damage the cable when withdrawing the

plug from the socket.

Keep the cable away from sharp edges and do not let it be

squashed, for example, under a door.

Avoid running the vacuum cleaner over the cable. This

could damage the cable, plug or socket. The appliance

must not be used if any of these have suffered damage. A

damaged cable, plug or socket is a safety hazard.

Do not use the vacuum cleaner if the cable is damaged.

If the cable is damaged it must be replaced together with a

complete cable rewind. For safety reasons this work must

be done by the Miele Service Department or a Miele

authorised service technician.

The socket on the vacuum cleaner (depending on

model) must only be used for the Miele Electrobrush

specified for use with this appliance.

When vacuuming especially fine dust, e.g. sawdust,

sand, plaster, flour, talcum powder etc., electrostatic

charges build up naturally. Under certain conditions these

charges will be released. To avoid the unpleasant effects

of these discharges, a metal inlay has been incorporated

into the underside of the handle. Please make sure that you

keep your hand in constant contact with this metal strip

during vacuuming.

en - Warning and Safety instructions

Table of Contents

Chapters

Table of Contents