Door Open Warning; Water Connection; Connecting The Water Hose To The Refrigerator - Beko ASN541B Manual
Hide thumbs
Also See for ASN541B:
- Installation, operation & food storage instructions (32 pages) ,
- User manual (43 pages) ,
- User manual (43 pages)
Table of Contents
Advertisement
Installation
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given when the
door of your product is left open for 1 minute. This
warning will be muted when the door is closed or
any of the display buttons (if any) are pressed.
3.7. Water connection
ASP341 models only
(This feature is optional)
Water system installation of the refrigerator must
be performed by a competent person.
Depending on the model of the refrigerator, you
may not have to connect to water main.First you
must connect the water hose to the refrigerator.
Check that following parts have been delivered
together with the product:
1. Union for connecting the water hose to the rear of
the refrigerator
2. 3 pieces of pipe clips (used to secure the water
hose)
3. 5-meter long water hose (1/4 inch in diameter)
4. (4) Cold mains water valve with mesh filter (tap
adapter)
5. (5) External water filter.
1
2
3
Refrigerator / User Manual
4
*5
3.8. Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose (a).
2. Push the water hose downwards firmly to slip it
onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure it onto the
water inlet valve.
C
Normally, you are not required to tighten
the union with a tool. However, you can use
a spanner or pliers to tighten the union if
there is a leakage.
9 / 31 EN
a
a
b
2
1
c
Hide quick links:
Advertisement
Table of Contents
