Page 2
Warning against electric voltage. Packaging materials of the prod- uct are manufactured from re- cyclable materials in accordance with our National Environment Regulations. www.beko.com This product was manufactured using the latest technology in environmentally friendly conditions.
1 Important instructions for 5 Operating the product safety and environment 5.1. Indicator panel....14 5.2. Neo-Frost Cooling System ..17 2 Your refrigerator 5.3.
Instructions on page 8 for • Do not dispose of the information on suitable appliance on a fire. location. At Beko, the care • To obtain the best and protection of our possible performance and environment is an trouble free operation ongoing commitment.
Important instructions for safety and environment by the manufacturer. • On delivery, check to • We suggest you keep make sure that the these instructions in product is not damaged a safe place for easy and that all the parts and reference.
Page 6
Beko on the pin face of the plug. authorised service agent. Fuse covers are available from any good electrical Warning! This store.
Important instructions for safety and environment Important! Fitting A Energy saving tips Different Plug 1. Ensure your appliance is installed in a As the colours of the well ventilated area. 2. Ensure the time between buying wires in the mains lead chilled/frozen food and placing them of this appliance may in your appliance is kept at minimum,...
Important instructions for safety and environment recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers. Compliance with rohs directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
Your refrigerator Congratulations on your choice a Beko quality Appliance which has been designed to give you service for many years. 1- Freezer compartment 8- Odour filter 2- Fridge compartment 9- Chiller compartment 3- Fan 10- Crisper compartment 4- Butter-cheese compartments...
Installation Always have the repair procedures Make sure that the power carried out by the Authorised Service cable is not pinched or crushed while pushing the product into Agent. Manufacturer shall not be held its place after installation or liable for damages that may arise from cleaning procedures.
Installation 3.2. Installing the • Electrical connection must comply plastic wedges with national regulations. • Power cable plug must be within easy Plastic wedges are used to create the reach after installation. distance for the air circulation between • The voltage and allowed fuse or the product and the rear wall.
Installation Original packaging and foam materials should be kept for future transportations. WARNING: Packaging materials are dangerous for the children. Keep packaging materials in a safe place away from reach of the children. 3.5. Illumination lamp Do not attempt to repair yourself but call the Authorised Service Agent if the LED illumination lamps do not go on or are out of order.
Preparation 4.1. Things to be done If two coolers are to be installed for energy saving side by side, there should be at least 4 cm distance between Connecting the product to them. electric energy saving systems is 4.2. Efficient operation risky as it may restrict operation of the product.
Preparation 4.4. Initial use Before starting to use the product, check that all preparations are made in accordance with the instructions in sections "Important instructions for safety and environment" and "Installation". • Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning”...
Operating the product 5.1. Indicator panel Indicator panels may vary according to the product model. 1- Economic use 2- High temperature / fault alert 3- Rapid cooling 4- Vacation function 5- Cooler compartment temperature setting 6- Energy saving (display off) 7- Keypad lock 8- Eco-fuzzy 9- Freezer compartment temperature...
Operating the product 5. Cooler compartment temperature 1. Economic use setting This sign will light up when the freezer After pressing the button number (5), compartment is set to -18°C' , the most the cooler compartment temperature economical setting. ( ) Economic use can be set to 8,7,6,5,4,3,2 and 1 indicator will turn off when rapid cooling...
Page 17
Operating the product The indicator will light up after 6 hours when the eco-fuzzy function is active. 9. Freezer compartment temperature setting The temperature in the freezer compartment is adjustable. Pressing the button number (9) will enable the freezer compartment temperature to be set at -18,-19, -20, -21, -22, -23 and -24.
Operating the product 5.2. Neo-Frost • The foodstuff that you want to freeze Cooling System must be fresh and in good quality. • Divide the food into portions according Thanks to the two separate cooling to your family's daily or meal based systems, cooling speed is much consumption needs.
Operating the product 5.4. Recommendations 5.6. Deep-freeze for preserving the information frozen food Food must be frozen as rapidly as • Frozen food that you have purchased possible when they are put in a should be stored in accordance with refrigerator in order to keep them in the frozen food manufacturer's good quality.
Operating the product 5.7. Icematic and ice 5.8. Ice making storage container *optional *optional Fill the ice container with water and place it into the freezer compartment. Using the Icematic’ Fill the Icematic with water and place it Your ice will be ready approximately in into its seat.
Operating the product 5.9. Chiller 5.12. Crisper compartment Crisper of the refrigerator is designed specially to keep the vegetables fresh *optional without losing their humidity. For this The chiller compartment maintains a purpose, cool air circulation is intensified lower temperature then the rest of the around the crisper in general.
Operating the product 5.13. Odour filter 5.14. Drip tray *optional *optional Odour filter prevents unpleasant odour build-up in your refrigerator. Water that dripped while using the water Odour filter can be located in the fridge dispenser accumulates in the spillage compartment on the back wall.Pull tray.
Operating the product 5.15. Water Dispenser 5.17. Filling the water dispenser's tank *optional Water tank filling reservoir is located The water dispenser will provide chilled inside the door rack. Open the reservoir water on tap, without the need for any cover and pour in clean drinking water.
Operating the product Water tray Use clean and pure drinking Water that dripped while using the water water only. dispenser accumulates in the spillage tray. Capacity of the water tank is 3 liters; do not overfill. Take out the plastic strainer as shown in the figure.
Maintenance and cleaning 6.1 Avoiding bad odours Cleaning your fridge at regular intervals will extend the service life of the prod- Materials that may cause odour uct. are not used in the production of our refrigerators. However, due to WARNING: Unplug the product inappropriate food preserving conditions before cleaning it.
Troubleshooting Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working.
Page 27
Troubleshooting • The new product may be larger than the previous one. Larger products will run for longer periods. • The room temperature may be high. >>> The product will normally run for long periods in higher room temperature. • The product may have been recently plugged in or a new food item is placed inside.
Page 28
Troubleshooting • The ground is not level or durable. >>> If the product is shaking when moved slowly, adjust the stands to balance the product. Also make sure the ground is sufficiently durable to bear the product. • Any items placed on the product may cause noise. >>> Remove any items placed on the product.
. • The cost of functional replacement parts, but excluding consumable items. • The labour costs of a Beko approved repairer to carry out the repair. What is not covered? • Transit, delivery or accidental damage or misuse and abuse.
Page 30
Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any di culty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 6004911 e-mail: service@beko.co.uk...