Page 2
Please read this manual before using the product! Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.
Table of Contents 1 Important instructions for safety and 5 Using the product environment 5.1. Indicator panel ..... 17 5.2. Activating water filter change warning ..27 2 Refrigerator 5.3.
• Do not dispose of the appliance on a fire. from 8 years and above and persons with reduced At Beko, the care and protection of our physical, sensory or mental capabilities or lack environment is an ongoing commitment. This...
Page 5
Replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Beko authorised service agent. Refrigerator / User Guide 4 / 42 EN...
Page 6
Safety and environment instructions Energy saving tips Important! Fitting A Different 1. Ensure your appliance is installed in a well ventilated Plug area. As the colours of the wires in the 2. Ensure the time between buying chilled/frozen mains lead of this appliance may food and placing them in your appliance is kept at not correspond with the coloured minimum, particularly in summer.
Page 7
Safety and environment instructions Package information Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
Installation 3.1. Right place for installation 3.2. Attaching the plastic wedges Use the plastic wedges in the provided with To ready the product for installation, see the the product to provide sufficient space for air information in the user guide and make sure the circulation between the product and the wall.
Installation 3.3. Adjusting the stands If the product is not in balanced position, adjust the front adjustable stands by rotating right or left. adjusting nut fixing nut fixing nut adjusting nut 3.4. Power connection WARNING: Do not use extension or multi sockets in power connection.
Installation 3.5. Water connection (Optional) WARNING: Unplug the product and the water pump (if available) during connection. The product can be connected to a carboy or directly to the water mains, depending on the model. To establish the connection, the water hose must first be connected to the product.
Installation 3.6. Connecting water 3.7. Connecting to water mains hose to the product (Optional) To connect the water hose to the product, To use the product by connecting to the cold water follow the instructions below. mains, a standard 1/2” valve connector must be 1.
Installation 4. Attach the connector into the tap adaptor and 2. Connect the other end of the water hose to tighten by hand / tool. the water pump by pushing the hose into the pump’s hose inlet. 5. To avoid damaging, shifting or accidentally 3.
Installation 3.9.1.Fixing external filter on the wall (Optional) WARNING: Do not fix the filter on the product. Check to see the following parts are supplied with your product’s model: 4. Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.) 1.
Installation 3.9.2.Internal filter 1. “Ice Off” indicator must be active while installing the filter. Switch the ON-OFF The internal filter provided with the product is not indicator using the “Ice” button on the screen. installed upon delivery; please follow the instructions below to install the filter.
Page 16
Installation 3. Remove the water filter by-pass cover by pulling. A few drops of water may flow out after removing the cover; this is normal. 4. Place the water filter cover into the mechanism and push to lock in place. 5.
Preparation 4.1. What to do for energy saving 4.2. First Use mehmet Before using your refrigerator, make sure the Connecting the product to electronic necessary preparations are made in line with energy-saving systems is harmful, as it the instructions in “Safety and environment may damage the product.
Using the product 5.1. Indicator panel Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator. 1. Cooler compartment indicator 2. Error status indicator 3. Temperature indicator 4.
Page 19
Using the product 1. Cooler compartment indicator Push the Vacation button ( ) again to cancel The cooler compartment light will turn on when this function. adjusting the cooler compartment temperature. 5. Temperature adjustment button 2. Error status indicator Respective compartment's temperature varies in This sensor will activate if the refrigerator is not -24°C..
Page 20
Using the product Eco Mode interaction with product/ Display On after any interaction with buttons Yellow: Vacation 1- Power failure/High temperature / error warning 2- Freezer compartment temperature setting 3- Quick freeze 4- Key lock 5- Vacation function 6- Quick Fridge 7- Fridge compartment temperature setting 8- Eco fuzzy 9- Alarm off warning...
Page 21
Using the product reset to its normal settings. Quick freeze function • High temperature alarm :RED (1 Hz flash) is cancelled automatically in 24 hour if you do not • Within 1 min. after the door is opened cancel it. If you want to freeze large amounts of (when the door: open alarm is enabled) RED light fresh food, press the quick freeze button before becomes on.
Page 22
Using the product 8. Eco fuzzy Press and hold the eco fuzzy button for 1 seconds to activate the eco fuzzy function. Refrigerator will start operating in the most economic mode at least 6 hours later and the economic usage indicator will be on ( ).
Page 23
Using the product 7.1 7.2 1. Economic use 2- High temperature / fault alert 3. Energy saving function (display off) 4- Rapid cooling 5- Vacation function 6- Cooler compartment temperature setting 7. Energy saving (display off) /Alarm off warning 8- Keypad lock 9- Eco-fuzzy 10- Freezer compartment temperature setting 11- Rapid freezing...
Page 24
Using the product 1. Economic use cool a large amount of fresh food, press the rapid This sign will light up when the freezer cool button before placing the food in the cooler compartment is set to -18°C', the most compartment.
Page 25
Using the product the keypad lock mode will be disengaged. Press the Display off button to prevent changingthe refrigerator’s tempeture settings. 9. Eco-fuzzy To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up.
Page 26
Using the product 11.2 11.1 1. Freezer compartment temperature setting 2. Economy mode 3. Energy saving function (display off) 4. Power failure/High temperature / error warning indicator 5. Cooler compartment temperature setting 6. Rapid cooling 7. Vacation function 8. Keypad lock / filter replacing alert cancellation 9.
Page 27
Using the product 1. Freezer compartment temperature setting 6. Rapid cooling For rapid cooling , press the button; this will Pressing the button ( ) will enable the freezer compartment temperature to be set at -18,-19,- activate the rapid cooling indicator ( 20,-21 ,-22,-23,-24,-18...
Using the product 11.2 Alarm off warning 2. Then enter 1-4-5-3 as password. Confirming the entered Selecting the In case of power failure/high temperature alarm, password password numbers after checking the food located in the freezer compartment press the alarm off button to clear the warning.
Using the product 5.4. Filling the fountain water tank 5.3. Using the water fountain Open the water tank’s lid, as shown in the figure. (for certain models) Fill in pure and clean drinking water. Close the lid. The first few glasses of water taken from the fountain will normally be warm.
Using the product 5.5. Cleaning the water tank Remove the water filling reservoir inside the door shelf. Detach by holding both sides of the door shelf. Hold both sides of the water tank and remove at 45° angle. Remove and clean the water tank lid. Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible for use in...
Using the product 5.6. Taking ice / water • The water may be cloudy during first use of the filter; do not consume the first 10 glasses (Optional) of water. To take water ( ) / ice cube ( ) / fragmented • You must wait approximately 12 hours to get ice ( ), use the display to select the respective...
Using the product 5.8. Zero degree compartment 5.11. Ionizer (Optional) (Optional) Use this compartment to keep delicatessen The ionizer system in the cooler compartment's at lower temperatures or meat products for air duct serves to ionize the air. The negative immediate consumption.
Using the product 5.15. Ice-maker 5.14. Icematic and ice storage box (Optional) (Optional) Ice maker is located on the upper section of the Fill the icematic with water and put in place. freezer cover. The ice will be ready after approximately two hours.
Page 34
Using the product When the ice dispenser does not work properly If you do not remove ice cubes for a long time, they will cause formation of ice chunks. In this case, please remove the ice stock reservoir in accordance with the ...
Using the product 5.16. Freezing fresh food 5.17. Recommendations for storing frozen foods • To preserve food quality, the food items placed in the freezer compartment must be frozen as The compartment must be set to at least -18°C. quickly as possible, use the rapid freezing for 1.
Using the product 5.21. Interior light 5.19. Placing the food Interior light uses a LED type lamp. Contact the Freezer Various frozen goods including authorized service for any problems with this lamp. compartment meat, fish, ice cream, The lamp(s) used in this appliance is not suitable shelves vegetables etc.
Maintenance and cleaning • Keep the food in closed containers. Cleaning your fridge at regular intervals will Microorganisms spreading out from uncovered extend the service life of the product. containers can cause unpleasant odours. WARNING: • Never keep the food that have passed best Unplug the product before before dates and spoiled in the refrigerator. cleaning it.
Maintenance and cleaning 6.3 Cleaning of Glass Water Tank Remove the water filling reservoir inside the door rack. Remove the door rack by holding from both sides. Remove the glass water tank cover by pressing both sides. Remove the hose connecting cover. Do not let children hang on the glass water tank since it may cause injury.
Troubleshooting Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working.
Page 40
Troubleshooting • The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again. The cooler temperature is very low, but the freezer temperature is adequate. • The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
Page 41
Troubleshooting • The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm water and carbonated water. • Certain holders and packaging materials may cause odour. >>> Use holders and packaging materials without free of odour. • The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro-organisms may spread out of unsealed food items and cause malodour. Remove any expired or spoilt foods from the product. The door is not closing. • Food packages may be blocking the door. >>> Relocate any items blocking the doors. • The product is not standing in full upright position on the ground.
Page 42
. • The cost of functional replacement parts, but excluding consumable items. • The labour costs of a Beko approved repairer to carry out the repair. What is not covered? • Transit, delivery or accidental damage or misuse and abuse.
Page 43
Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any di culty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 6004911 e-mail: service@beko.co.uk...