Table of Contents
Advertisement
Computer Configuration (Continued)
Manual Network Configutation:
Note
All Operating Systems: use the TCP/IP settings provided by your CATV Service Provider, or if no other data
is provided use the values from the
TCP/IP configuration procedures.
TCP/IP Settings
Table
Cisco DVB
Single PC
CAR100-PC
PC 1
PC 2
Cisco DVB
CAR100-LAN
PC 3
PC 4 to PC 20
Subnet Mask
All versions
255.255.255.0
Manual TCP/IP Configuration for Windows 95/98
Step 1
Choose Start>Settings>Control Panel>Network
Step 2
Select the Configuration tab.
Step 3
Select the TCP/IP [your Ethernet adapter] entry, Properties, then the IP Address tab.
Step 4
Click Specify an IP address and enter values for IP address and subnet mask from the TCP/IP Settings
Table above to configure the TCP/IP settings of your PC.
Step 5
Click the Gateway tab and enter values for the default gateway from the
Step 6
Select DNS Configuration, Enable DNS and enter the DNS Server information supplied by your CATV
Service Provider.
Step 7
Click OK and Reboot the PC if neccessary.
If you have the CAR100-LAN version repeat steps 1 to 7 for each connected PC
below. Refer to your Operating System documentation for
TCP/IP Settings Table
IP Address
192.168.128.10
192.168.128.10
192.168.128.11
192.168.128.12
192.168.128.13 to 29
Default Gateway
192.168.128.2
TCP/IP Settings Table
5
Advertisement
Table of Contents
