Mounting The Cisco Rv180/Rv180W; Placement Tips; Wall Mounting - Cisco RV180 Administrator's Manual
Hide thumbs
Also See for RV180:
- Administration manual (187 pages) ,
- Manual (14 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Introduction
Mounting the Cisco RV180/RV180W
Mounting the Cisco RV180/RV180W
WARNING
Cisco RV180/RV180W Administration Guide
You can place your Cisco RV180/RV180W on a desktop or mount it on a wall.
Placement Tips
•
Ambient Temperature—To prevent the device from overheating, do not
operate it in an area that exceeds an ambient temperature of
104°F (40°C).
•
Air Flow—Be sure that there is adequate air flow around the device.
•
Mechanical Loading—Be sure that the device is level and stable to avoid
any hazardous conditions.
For desktop placement, place the Cisco RV180/RV180W device horizontally on a
flat surface so that it sits on its four rubber feet.
Wall Mounting
The Cisco RV180/RV180W can be wall-mounted. You will need two mounting
screws (not supplied) and drywall anchors (not supplied), if you are installing the
screws into wallboard. The dimensions for the screws are as follows:
2
1
0.30 to 0.32 in/
2 0.86 to 0.88 in/
7.7 to 8.2 mm
21.8 to 22.3
mm
Insecure mounting might damage the device or cause injury. Cisco is not
responsible for damages incurred by insecure wall-mounting.
1
3
4
3 0.26 to 0.28 in/
6.5 to 7. 1 mm
4 0.61 to 0.63 in/
15.5 to 16 mm
1
8
Advertisement
Table of Contents
