Configuring the Voice Settings
PSTN (LINE Port)
Cisco SPA232D Administration Guide
Field
Ans Call Without
Reg
Use DNS SRV
DNS SRV Auto
Prefix
Proxy Fallback
Intvl
Proxy Redundancy
Method
Subscriber Information
Field
Display Name
User ID
Description
Expires value in sec in a REGISTER request. ATA will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the
Register
parameter is no. Range: 0 – (231 – 1) sec
Default setting: yes
If required by your provider, check this box to use DNS
SRV lookup for Proxy and Outbound Proxy.
Default setting: no
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a
DNS SRV lookup on that name.
Default setting: no
This parameter sets the delay (sec) after which the ATA
will retry from the highest priority proxy (or outbound
proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and
backup proxy server list is provided to the ATA via DNS
SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion
of priority and so all hosts will be considered at the same
priority and the ATA will not attempt to fall back after a fail
over).
Default setting: 3600
The ATA makes an internal list of proxies returned in DNS
SRV records. In normal mode this list will contain proxies
ranked by weight and priority.
Based on SRV port
If the parameter
creates a list in normal mode first, and then inspects the
port numbers based on the 1
Default setting: Normal
Description
Display name for caller ID.
Extension number for this line.
is configured, the ATA
st
proxy's port on the list.
4
133