Cisco Catalyst 3560-CX User Manual page 39

Hide thumbs Also See for Catalyst 3560-CX:

Table of Contents

Switch Installation

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions

Warning

to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the

heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing

the unit in the rack.

Statement 1006

Attach a bracket to one side of the switch. Follow the same steps to attach the second bracket to the opposite

side. The following figures show how to attach the 19-inch rack-mounting bracket and the 23-inch

rack-mounting bracket.

Figure 21: Attaching the 19-inch Brackets for Rack-Mounting

Figure 22: Attaching the 23-inch Brackets for Rack-Mounting

Insert the switch into the rack and align the bracket in the rack. Use either the number-12 or number-10 Phillips

machine screws to secure the switch in the rack.

Catalyst 3560-CX and 2960-CX Switch Hardware Installation Guide

In a Rack

Table of Contents

Show Quick Links

Table of Contents

Catalyst 2960-cx