Marker Settings Item - JVC GY-HM650U Instructions Manual
Hd memory card camera recorder
Hide thumbs
Also See for GY-HM650U:
- Instructions manual (184 pages) ,
- Service manual (26 pages) ,
- Instruction manual (2 pages)
Table of Contents
Advertisement
Marker Settings Item
For setting the marker and safety zone, which are
useful in helping you determine the angle of view
for the image according to the shooting purpose.
(A P137 [Marker and Safety Zone Displays
(Camera Mode Only)] )
Memo :
During Clip Review or when in the Media mode,
0
the markers do not appear regardless of the
setting.
Marker Settings
For setting whether to display marker, safety zone,
and center marks on the screen.
[Setting Values: On, ROff]
9 Grid Marker
For setting whether to display a 3x3 grid on the
screen.
[Setting Values: On, ROff]
Memo :
When [Grid Marker] is set to "On", [Aspect
0
Ratio], [Aspect Marker], and [Safety Zone] do
not function.
9 Aspect Ratio
For selecting the final image aspect ratio to be used
from the overall angle of view.
[Setting Values: 16:9(+4:3), 2.35:1, 1.85:1, R16:9,
1.75:1, 1.66:1, 14:9, 13:9, 4:3, 2.35:1 Center,
2.35:1 Top, 1.85:1 Center, 1.85:1 Top]
Memo :
When [System] B [Record Set] B [Record
0
Format] B [SD Aspect] is set to "4:3", this item
is fixed at "4:3" and cannot be selected.
(A P118 [ SD Aspect ] )
9 Aspect Marker
For specifying how boundary markers are to be
used to indicate the parts of an image that are
beyond the range of the aspect ratio selected in
[Aspect Ratio].
Line+Halftone:
0
Displays the boundary using lines, and areas
outside the boundary in halftone.
Halftone:
0
Displays areas outside the boundary in halftone.
Line:
0
Displays the boundary using lines.
Off:
0
Hides the boundary markers.
[Setting Values: Line+Halftone, Halftone, Line,
ROff]
Memo :
When [Aspect Ratio] is set to "16:9" or
0
"16:9(+4:3)", this item is fixed at "Off" and cannot
be selected.
9 Safety Zone
For setting the percentage of area that is to be
deemed as valid area (Safety Zone) within the
boundary of the aspect ratio selected in [Aspect
Ratio].
[Setting Values: 95%, 93%, 90%, 88%, 80%, ROff]
9 Center Mark
For specifying whether to display a mark to indicate
the screen center within the aspect ratio selected
in [Aspect Ratio].
[Setting Values: ROn, Off]
109
Advertisement
Table of Contents
