hit counter script
Yamaha DSP-AX863SE Service Manual

Yamaha DSP-AX863SE Service Manual

Av receiver/av amplifier
Hide thumbs Also See for DSP-AX863SE:

Advertisement

DSP-AX863SE/DSP-AX863
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
I CONTENTS
TO SERVICE PERSONNEL .......................................... 2
FRONT PANELS ........................................................ 3–5
REAR PANELS ........................................................ 6–10
REMOTE CONTROL PANELS .................................... 11
SPECIFICATIONS /
INTERNAL VIEW ......................................................... 16
DISASSEMBLY PROCEDURES /
UPDATING FIRMWARE
SELF DIAGNOSIS FUNCTION (DIAG)
CONFIRMATION OF IDLING CURRENT OF AMP UNIT
1 0 1 0 8 8
AV RECEIVER/AV AMPLIFIER
RX-V863/HTR-6180/
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
................................ 12–15
.......... 16–21
.................................. 22–36
.................................. 37–63
............... 64
2008
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.

SERVICE MANUAL

IMPORTANT NOTICE
DISPLAY DATA ........................................................... 65
IC DATA ................................................................. 66–82
PIN CONNECTION DIAGRAMS ............................ 83–86
BLOCK DIAGRAMS .............................................. 87–91
PRINTED CIRCUIT BOARDS .............................. 92–105
SCHEMATIC DIAGRAMS .................................. 107–117
REPLACEMENT PARTS LIST .......................... 119–147
REMOTE CONTROL .......................................... 148–151
ADVANCED SETUP /
Using Bluetooth components /
All rights reserved.
.... 152–154
........................................ 155
P.O.Box 1, Hamamatsu, Japan
'08.03

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha DSP-AX863SE

  • Page 1: Service Manual

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 11: Remote Control Panels

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I REMOTE CONTROL PANELS • RAV329 • RAV330 • RAV372 RX-V863 (U, C models) RX-V863 (R, T, A, L models) RX-V863 (K, G, E, F models) HTR-6180 (U, C models) DSP-AX863 (J model) HTR-6180 (F model) DSP-AX863SE (B model)
  • Page 12: Specifications

    (IHF-A network) PHONO (MM) (Input shorted) to REC OUT [RX-V863/DSP-AX863/DSP-AX863SE] (20 Hz to 20 kHz) U, C, R, T models (5 mV) ........86 dB or more K, A, B, G, E, F, L models (5 mV) ......81 dB or more U, C, R, T, K, A, B, G, E, F, L models (0.06 % THD, 8 ohms)
  • Page 13: Table Of Contents

    B, G, E, F models ..........AC 230 V, 50 Hz Bluetooth is a registered trademark of the Bluetooth SIG and is used L model ..........AC 220/230-240 V, 50/60 Hz by Yamaha in accordance with a license agreement. J model ............AC 100 V, 50/60 Hz Power Consumption / U, C models ............
  • Page 14 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • SELECT MENU CATEGORY SOUND FIELD CLASSICAL Hall in Munich Hall in Vienna Chamber LIVE/CLUB Cellar Club The Roxy Theatre The Bottom Line ENTERTAINMENT Sports Action Game Roleplaying Game Music Video MOVIE Standard Spectacle Sci-Fi Adventure Drama Mono Movie...
  • Page 15 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863...
  • Page 16: Internal View

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I INTERNAL VIEW I DISASSEMBLY PROCEDURES • Top view (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. POWER TRANSFORMER FUNCTION (6) P.C.B. 1. Removal of Top Cover FUNCTION (3) P.C.B. a. Remove 4 screws (1), 5 screws (2) and screw (3).
  • Page 17 (Fig. 3) Remove CB39 (RX-V863: U, C models / HTR-6180: U model), CB205, CB206, CB231, CB232, CB242 (C, R, T, K, A, G, E, F, L models), CB243 (DSP-AX863SE: B model), CB244 (U model), CB245 (U model) and CB302. (Fig. 2) d.
  • Page 18 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 6. Removal of VIDEO (1) and (2) P.C.B.s 7. Removal of HD Radio Tuner (U model) a. Remove 2 screws (B) and then remove the FUNC- a. Remove 2 screws (E) and 2 screws (F). (Fig. 6) HD radio tuner TION (6) P.C.B.
  • Page 19 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 10. Removal of Amp Unit a. Remove 2 screws (I), screw (J), 2 screws (K) and screw (L). (Fig. 9) b. Remove 6 screws (M). (Fig. 9) Remove CB100, CB101 and CB251. (Fig. 9) d. Remove the MAIN (1) and (2) P.C.B.s together with heat sink.
  • Page 20 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 When checking the P.C.B.: • Put the rubber sheet and cloth over the equipment. Then place the FUNCTION(1) P.C.B. upside down on the cloth and check it. (Fig. 10) • Reconnect all cables (connectors) that have been disconnected. •...
  • Page 21 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Ground point When checking the P.C.B.: DIGITAL P.C.B. Ground point • Put the rubber sheet and cloth over the equipment. PJ41 ST100 Then place the FUNCTION(1) and DIGITAL P.C.B.s FUNCTION (1) P.C.B. upside down on the cloth and check it. (Fig. 11) •...
  • Page 22: Updating Firmware

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I UPDATING FIRMWARE / Note) Updating the firmware restores all the sound field parameters, system memory and tuner preset- G Operation Procedures ting, etc. to the original factory settings. 1. Connect this unit and DVD/CD player as shown below. (Fig. 1) When replacing the following parts, be sure to write the latest firmware.
  • Page 23 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 2. While pressing the “TONE CONTROL” key of this unit, connect the power cable of this unit to the AC outlet. (Fig. 2) The FIRMWARE UPDATE mode is activated and “CDDA Upgrader” is displayed. (Fig. 2) "TONE CONTROL" key CDDA Upgrader Fig.
  • Page 24 AC outlet. 13. Turn off the power by pressing the “MAIN ZONE ON/ OFF” (RX-V863 / HTR-6180: U, F models) /“STAND/ ON” (HTR-6180: C model / DSP-AX863SE) key of this unit. G Initializing of this unit After updating the firmware, be sure to initialize this unit.
  • Page 25 2. Press the “MAIN ZONE ON/OFF” (RX-V863 / HTR-6180: U, F models) / “STANDBY/ON” (HTR- 6180: C model / DSP-AX863SE) key while simul- taneously pressing the “STRAIGHT” and “AUDIO SELECT” keys. (Fig. 5) Then the self-diagnostic function is activated.
  • Page 26: R, T, K, A, B, G, E, F, L Models

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Writing method using PC (RS232C) G Required Tools • Windows 2000/XP, PC with a serial port (RS232C) • Firmware downloader program For microprocessor: DSP_FLASHER_v3.0_M16C80.exe For DSP (TI flash ROM): DSP_FLASHER Ver2.7.exe • Firmware For microprocessor: U model: U863xxxx.mot C, R, T, K, A, B, G, E, F, L models: VX63xxxx.mot...
  • Page 27: J Model

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 2. Set the switch (SW301) of RS232C conversion adapter to the “FLASH UCOM” side. (Fig. 1) 3. Connect the writing port of this unit to the serial port (RS232C) of the PC with RS232C cross cable, RS232C conversion adapter and flexible flat cable as shown below.
  • Page 28 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 6. Reconnect the power cable of this unit to the AC outlet. 7. Click [E.P.] to start writing. (Fig. 3) 8. When writing is completed, “Program Finished!” is displayed. (Fig. 3) Click [OK]. (Fig. 3) 9. Click [EXIT] to end “DSP_FLASHER_v3.0_M16 C80.exe”.
  • Page 29 1. Connect the power cable of this unit to the AC outlet. 2. Press the “MAIN ZONE ON/OFF” (RX-V863 / HTR- 6180: U, F models) / “STANDBY/ON” (HTR-6180: C model / DSP-AX863SE) key while simultaneously pressing the “STRAIGHT” and “AUDIO SELECT” keys. (Fig. 4) Then the self-diagnostic function is activated.
  • Page 30 2. Press the “MAIN ZONE ON/OFF” (RX-V863 / HTR-6180: U, F models) / “STANDBY/ON” (HTR- 6180: C model / DSP-AX863SE) key while simul- taneously pressing the “STRAIGHT” and “AUDIO SELECT” keys. (Fig. 5) Then the self-diagnostic function is activated.
  • Page 31 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Writing to DSP • Writing firmware 1. Turn off the power of this unit and disconnect the power cable from the AC outlet. 2. Set the switch (SW301) of RS232C conversion adapter to the “OTHER” side. (Fig. 1) 3. Connect the writing port of this unit to the serial...
  • Page 32 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 6. Click [...]. (Fig. 3) Select “Vx63_data1_verxxxxxr.hex”. (Fig. 3) Fig. 3 7. Click [RDY]. (Fig. 4) Fig. 4...
  • Page 33 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 8. Connect the power cable of this unit to the AC outlet while pressing the “AUDIO SELECT” key. (Fig. 5) Writing is started automatically. (Fig. 5) "AUDIO SELECT" key Writing / Fig. 5...
  • Page 34 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 9. When writing is completed, “Vx61 DSP Flash fin- ished!” is displayed. (Fig. 6) 10. Click [EXIT] to end “DSP_FLASHER Ver2.7.exe”. (Fig. 6) When writing is completed, “Vx61 DSP Flash finished!” is displayed. Fig. 6 11. Disconnect the power cable of this unit from the AC outlet.
  • Page 35 1. Connect the power cable of this unit to the AC outlet. 2. Press the “MAIN ZONE ON/OFF” (RX-V863 / HTR- 6180: U, F models) / “STANDBY/ON” (HTR-6180: C model / DSP-AX863SE) key while simultaneously pressing the “STRAIGHT” and “AUDIO SELECT” keys. (Fig. 7) Then the self-diagnostic function is activated.
  • Page 36 2. Press the “MAIN ZONE ON/OFF” (RX-V863 / HTR-6180: U, F models) / “STANDBY/ON” (HTR- 6180: C model / DSP-AX863SE) key while simul- taneously pressing the “STRAIGHT” and “AUDIO SELECT” keys. (Fig. 8) Then the self-diagnostic function is activated.
  • Page 37 5. PRESENCE Mix-F HDMI INFORMATION 1. MN : XXXXXXX 6. Zone2 Amp ON 2. PI : 312X 7. Bi-AMP 3. VN : YAMAHA 8. TONE : MAX HDMI SELECT 1. HDMI NONE 9. TONE : MIN 2. HDMI IN 1 XCH-INPUT 1.
  • Page 38 6180: U, F models) / “STANDBY/ON” (HTR-6180: C setting for FACTORY PRESET of main menu No. model / DSP-AX863SE / DSP-AX863) key while si- 23 (Memory initialization inhibited or Memory ini- multaneously pressing those two keys of this unit as tialized).
  • Page 39 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 When there is a history of protection function: When there is a history of protection function due to excess current I PROTECT Cause: An excessive current flowed through the power amplifier. Supplementary information: As current of the power amplifier is detected, the abnormal channel can be identified by checking the current detect transistor.
  • Page 40 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 When there is a history of protection function due to abnormal voltage in the power supply section PS1 PRT:xxx PS2 PRT:xxx Cause: The voltage in the power supply section is abnormal. Supplementary information: The protection function worked due to a de- fect or overload in the power supply.
  • Page 41 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • Operation procedure of Main menu and Sub-menu There are 24 main menu items, each them having sub-menu items. Main menu selection: Select the main menu using “PROGRAM” knob. Sub-menu selection: Select the sub-menu using “SCENE 2” (forward) / “SCENE 1”...
  • Page 42 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • Details of Self-Diagnostic Function menu 1. BYPASS Using the sub-menu, it is possible to select ANALOG BYPASS output or DSP BYPASS output. ANALOG BYPASS The analog input audio signal is output to FRONT L/R by PURE DIRECT. 1.ANALOG BYPAS...
  • Page 43 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 2. RAM THROUGH Using the sub-menu, it is possible to select MARGIN output or FULL BIT output. RAM MARGIN The signal is output including the head margin. 2.RAM MARGIN FRONT L/R CENTER SURROUND L/R SURROUND BACK L/R SUBWOOFER +9.0 dB +13.5 dB...
  • Page 44 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 3. HDMI AUDIO The audio signals input to HDMI IN are selected by the sub-menu and output. * When selecting “DSD”, be sure to connect an HDMI unit equipped with DSD output function to this unit. SPDIF 3.SPDIF SPDIF signal is output.
  • Page 45 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 FRONT: SML 0dB 4.FRNT:SML 0dB 90 Hz or lower signal is mixed to the channel specified by LFE/BASS and output. CENTER: NONE 4.CENTER:NONE The CENTER signal is assigned to FRONT L/R. LFE / BASS: FRONT 4.LFE/B:FRNT The LFE/BASS signal is assigned to FRONT L/R.
  • Page 46 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 5. XCH-INPUT The input source “MULTI CHANNEL INPUT” is se- lected. It is possible to select the 6 ch/8 ch and 6-ohm/8-ohm by using the sub-menu. When LIM / PLDET / THM menu is selected, it is pos- sible to move to the next self-diagnostic function menu by turning the “PROGRAM”...
  • Page 47 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 LIM / PLDET / THM LIM: Setting value of LIM (Limiter control) * Do not change the value settings because this menu is only for the use of develop- ment staff. PLDET: Power limiter detection The A/D conversion value during operation is displayed.
  • Page 48 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 7. FL/OSD CHECK Use this program to check the FL display section and video control section. When checking the video con- trol section, connect a TV monitor to this unit with a component video cable, S video cable and video pin cable.
  • Page 49 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 8. MANUAL TEST Noise is output to all channels through the noise gen- eration circuit which is included in the microprocessor. The noise frequency for LFE (SUBWOOFER) is 35 to 80 Hz. Other than that, the noise frequency is 500 to 2 kHz.
  • Page 50 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 DC/TH Power amplifier DC protection detection Power amplifier DC (DC voltage) output is detected. Normal value: 5 to 36 (Reference voltage: 5.0 V=255) THM (Thermo protection detection) Temperature of the heat sink is detected. Normal value: 0 to 124 (Reference volt- age: 5.0 V=255)
  • Page 51 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 DST/DK DST: Destination detection (Reference voltage: 5V=255) DOCK type detection (Reference voltage: 5V=255) DST:027DK:252 Destination detection for AD port Pull-up resistance 10 k-ohms 0.0 k 1.2 k 2.7 k 4.7 k 6.8 k 10.0 k 15.0 k 27.0 k 47.0 k...
  • Page 52 INFO 83 - 89 PURE DIRECT INFO 90 - 100 KEY OFF KEY OFF 90 - 100 KEY OFF KEY OFF DSP-AX863SE (B model) Display / KEY0 KEY1 0 - 4 – – 5 - 13 SCENE1 SCENE3 14 - 21...
  • Page 53 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 10. VIDEO CHECK The video circuit is checked by the sub-menu opera- tion. I2C (Inter integrated circuit) read/write check Self-diagnosis is executed to check whether data reading/writing between the microprocessor con- nected to the 12C line and each IC is done properly or not.
  • Page 54 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Digital CVBS (Video) The signal passage as shown below is checked. DIGITAL CVBS Digital CVBS (Video) DIGITAL DIGITAL IC17 IC10 DIGITAL SII9135CTU SIL9134CTU IC83 ABT1010 I/P SCALAR DIGITAL DIGITAL IC82 IC84 ADV7800 ADV7172 VIDEO DECODER VIDEO VIDEO ENCODER IC358...
  • Page 55 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Analog bypass The signal passage as shown below is checked. ANALOG BYPASS Analog bypass (Conversion OFF) DIGITAL DIGITAL IC17 IC10 DIGITAL SII9135CTU SIL9134CTU IC83 ABT1010 I/P SCALAR DIGITAL DIGITAL IC82 IC84 ADV7800 ADV7172 VIDEO DECODER VIDEO VIDEO ENCODER IC358...
  • Page 56 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 11. XM STATUS (U, C models) The output check of XM radio is executed. (Connect XM radio antenna module to this unit before executing.) 1 kHz, -1 dB / 44.1 kHz 1k - 1dB/44 The test tone (1 kHz, -1 dB / 44.1 kHz) is output.
  • Page 57 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 12. SIRIUS (U, C models) The SIRIUS version is displayed. SIRIUS: SIRIUS: -- Connection of the SIRIUS antenna module connection is checked. OK : Normal NG : Abnormal — : No connected SR:FF 00 FF The connection information of the SIRIUS antenna module is displayed.
  • Page 58 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 14. DOCK This menu is used to test the DOCK connector without the iPod itself. After turning off the power, short between pins No. 14 (TX) and No. 18 (RX), between pins No. 1 (PWR) and No. 17 (ACCPOW) and between pins No. 4 (iPDET) and No.
  • Page 59 312B: RX-V863 (U, C, R, T, K, A, B, G, E, F, L models) 3128: HTR-6180 (U, C, F models) 312A: DSP-AX863SE (B model) 3129: DSP-AX863 (J model) HDMI vendor name VN:YAMAHA The vendor name “YAMAHA” of this unit written in HDMI module is displayed.
  • Page 60 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 16. HDMI SELECT The selected input signal is output to HDMI OUT by the sub-menu operation. * Support audio is set to “OTHER”. HDMI none HDMI NONE No signal is output. HDMI in 1 HDMI IN 1 HDMI “IN 1” is output.
  • Page 61 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 17. IF STATUS (Input function status) The status information is displayed in the hexadeci- mal notation one after another by the sub-menu op- eration. For signal processing, the status before the sub-menu operation is maintained. * Mentioning the details is not allowed because this menu is only for the use of development staff.
  • Page 62 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 22. UPDATE Not applied to these models. 22.UPDATE TI 22.UPDATE CEC 23. FACTORY PRESET This menu is used to reserve/inhibit initialization of the user memory (Parameters and set menu contents, etc. of the sound field program). The signals are processed using EFFECT OFF (The L/R signal is output using ANALOG BYPASS).
  • Page 63 Firmware version of SIRIUS is displayed. Destination/Model detect V8 000 U 028 The informations of the destination and models are displayed. Reserved Model: RX-V863/DSP-AX863SE/DSP-AX863, HTR-6180 RX-V863/DSP-AX863SE/DSP-AX863 HTR-6180 MOD0 MOD1 MOD2 Destination: U, C, R, T, K, A, B, G, E, F, L, J...
  • Page 64: Confirmation Of Idling Current Of Amp Unit

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I CONFIRMATION OF IDLING CURRENT OF AMP UNIT • Right after power is turned on, confirm that the voltage across the terminals of R1303 (SURROUND BACK R ch), R1153 (SURROUND R ch), R1154 (FRONT R ch), R1152 (CEN- TER), R1150 (FRONT L ch), R1151 (SURROUND L ch), R1149 (SURROUND BACK L ch) are between 0.1 mV and...
  • Page 65: Display Data

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I DISPLAY DATA G V401: 17-BT-32GNK (OPERATION P.C.B.) G ANODE CONNECTION 13G~1G PATTERN AREA G PIN CONNECTION Pin No. 68 67 Connection F2 NX Pin No. Connection Note : 1) F1, F2 ..Filament pin 2) NP ..No pin 3) NX ..
  • Page 66 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I IC DATA IC41: LC89057W-VF4AD-E (DIGITAL P.C.B.) Pin No. Function Name Detail of Function Digital audio interface transceiver EMPHA/UO AUDIO/VO XMODE Microcontroller RXOUT Cbit, Ubit RERR Demodulation Input Data & RDATA Selector Selector Lock detect RX5/VI SDIN RX6/UI RMCK...
  • Page 67 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 IC44 : D70YE101BRFP266 (DIGITAL P.C.B.) Floating-point digital signal processors * No replacement part available. / Program/Data JTAG EMU 256K Bytes McASP0 Data 16 Serializers Program/Data ROM Page1 C67x + Microprocessor 256K Bytes Memory Data Controller Program/Data McASP1 ROM Page2...
  • Page 68 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Detail of Function TYPE PULL GPIO External memory interface (EMIF) address and control EM_CAS – SDRAM column address strobe EM_WE – SDRAM write enable EM_WE_DQM[0] – Write enable or byte enable for EM_D[7:0] EM_WE_DQM[1] – Write enable or byte enable for EM_D[15:8] EM_CLK –...
  • Page 69 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Detail of Function TYPE PULL GPIO AXR0[3] – McASP0 serial data 3 AXR0[4] – McASP0 serial data 4 SPI1_SCS – McASP0 serial data 5 or SPI1 slave chip select SPI1_ENA – McASP0 serial data 6 or SPI1 enable (Ready) SPI1_CLK –...
  • Page 70 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Detail of Function TYPE PULL GPIO CVDD Core supply DVDD I/O supply Ground 1) TYPE column refers to pin direction in functional mode. If a pin has more than one function with different directions, the functions are separated with a slash (/).
  • Page 71 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 IC202 : R2A15218FP (FUNCTION P.C.B.) 8 ch electronic volume with 11 input selector and tone control 49 48 46 45 38 37 34 33 A VCC MUTE AVCC N.C. AVEE A VEE N.C. TREL 0/-6/-12/-18dB ADCL BASSL2 BASSL1 ADCR N.C.
  • Page 72 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Pin No. Function Name Detail of Function SBLC Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume SBL OUT Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel AGND Analog ground of internal circuit SBR OUT Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel SBRC...
  • Page 73 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Pin No. Function Name Detail of Function MUTE Outside mute control pin AVEE Negative power supply to internal circuit ADCL Output pin for L/R channel ADC ADCR AGND Analog ground of internal circuit INR1 INL1 INR2 INL2 INR3 INL3...
  • Page 74 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 IC401 : M66003-0131FP (OPERATION P.C.B.) FL display driver Display code CGROM SEG00 (35 bit x 166) (8-bit x 60) SEG25 Segment Code output write SEG26 circuit CGROM SEG34 dot data Serial (35 bit x 16) data write receive Code/...
  • Page 75 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Pin No. Port Name Function Name Detail of Function RESET /RESET Reset input When “L”, M66003 is initialized. /CEFL Chip select input When “L”, communication with the MCU is possible. CKFL Shift clock input When “H”, any instruction from the MCU is neglected.
  • Page 76 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 IC30 : M30878FJBGP (DIGITAL P.C.B.) Single chip 16/32-bit microprocessor Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 < > < > Peripheral Functions Clock Generation Circuit A/D Converter: 1 circuit Timer (16-bit) Standard: 10 inputs...
  • Page 77 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Port Name Detail of Function (P.C.B.) TXD4 TXDi Asynchronous data output for iPod XMPWR Power control output for XM antenna H: ON, L: OFF (U, C models) Limiter control output TB3in iPDET iPod loaded in DOCK detect...
  • Page 78 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Port Name Detail of Function (P.C.B.) SCL2 SCLL I2C clock input/output for HDMI switcher & video switch (100kHz device) Pull up at HDMI block SDA2 SDAL I2C clock input/output for HDMI switcher & video switch (100kHz device)
  • Page 79 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Port Name Detail of Function (P.C.B.) P132 /ICS Reset output for VIDEO SCALER IC L: Reset Low Fix when VPWR OFF Vcc2 P131 CEC_DPWR ON/OFF control of CEC and DSP power supply H: ON, L: OFF DIR, TI DSP, XMIC resetting executed 50ms after DSP power ON...
  • Page 80 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Port Name Detail of Function (P.C.B.) P123 Chip enable output for tuner PLL HDRD_N_RST [ I ] Reset output for HD Radio Use prohibited, always set to input (HiZ) Data is taken in with PSV port set to High 20ms after resetting is cancelled...
  • Page 81 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Function Name Port Name Detail of Function (P.C.B.) ISTXD1 TXDSR Asynchronous communication data output for SIRIUS radio Serial communication is 5V TTL/CMOS logic level (U, C models) SCENE button LED control 0 SCEN0 SCEN1 SCENE button LED control 1...
  • Page 82 MUTE SCENE3 SCENE4 SLEEP FM/AM A/B/C/D/E PRESET < PRESET > MEMORY INFO (134 pin) SELECT DSP-AX863SE (B model) +1.0 k +1.0 k +1.5 k +2.2 k +3.3 k +4.7 k +4.7 k +6.8 k +10.0 k +22.0 k 0-0.23 0.24-0.64 0.65-1.06...
  • Page 83 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I PIN CONNECTION DIAGRAMS ABT1010PQ100A ADV7172KST ADV7800BSTZ-80 BA15218F BD3841FS D70YE101BRFP266 EN29LV160AB-70TCP F2621E-01-TR M30878FJBGP KIA7912PI LA73050-TLM-E LC72725KM-UY-TLM-E LC74782JM-8A16-TLMC PCM1780DBQR PCM1781DBQR LC89057W-VF4AD-E LM61CIZ M12L64164A-5TG M66003-0131FP-R MN103SFD7G NJM2068MD-TE2 NJM2388F05 NJM2388F09 NJM2581M NJM2867F3-05 NJM4565M NJM2396F33 TC74VHC08FT TC7SET32FU TC74VHCU04FT TC7SH04FU 1. V 1. V 2.
  • Page 84 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 NJM7805FA NJM78M05DL1A NJW1321FP1 PCM1803DBR NE5532DR NJM7812FA SN74LVC245APWR SN74LVTH245APW TC74VHC541FT TC74VHCT541AFT 1: IN 1: INPUT 2: GND 2: GND 3: OUT 3: OUTPUT PCM1680DBQR R1154H058B-T1-F R1172H181B-T1-F R1172S121D-E2-F R1232D181A-TR-F R1172H331D-T1-F R1172S331B-E2-F 1: CE 2: GND 3: NC 4: V 5: V...
  • Page 85 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Diodes 1N4002S 1SS355 D6SBN20 DB105 MA8024-(TX) 2.4V 1SS380 1SS133 Anode 1SS176 Anode 1SS270A Anode – Cathode – Cathode Cathode MA8030-L 2.9V MA8091-M 9.1V RB500V-40 MTZJ2.4B RB441Q-40 MA8036 3.6V MA8100-H 10.3V RB501V-40 MTZJ5.1C MA8051-M 5.1V MA8100-M 10.0V MTZJ6.2B Anode Anode MA8056-M 5.6V...
  • Page 86 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 Transistors 2N5401C-AT/P 2N5551C-AT 2SA949 2SA1576A 2SA1695 O,P,Y 2SA1708 2SC1815 Y 2SA1015-Y 2SC4468 O,P,Y 2SC2229 2SC2240 2SA1770S/T-AN 2SC1740S 2SC2412K 2SC3326-A (TE85R, F) 2SC4614S/T-AN 2SD1915F 2SD2014 2SC3326-B (TE85R, F) 2SC4081 T106 2SD1938F KTA1504S KTC3875S 2SK246-Y (TPE2, F) 2SK3850 3LN01C-TB-E DTA143EKA KRA102M-AT/P...
  • Page 87 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE I BLOCK DIAGRAMS AUDIO (DIGITAL) SECTION BLOCK DIAGRAM • See page 107-111 → DIGITAL SCHEMATIC DIAGRAM IC16 IC17 HDMI Switcher HDMI Dual Receiver SII9135CTU 86 85 81 82 83 84 78 89 MCLK SCK/DCLK WS /DR0 SD0/DL0 SD1/DR1 SD2/DL1...
  • Page 88: U, C Models

    RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE AUDIO (ANALOG) SECTION BLOCK DIAGRAM • See page 112-113 → To AUDIO (DIGITAL) SECTION FUNCTION SCHEMATIC DIAGRAM DOCK (U, C models) J2006 Selector (XM/SIRIUS/MIC) RECB ZONE2 Sel MAIN Sel (R, T, K, A, B, G, E, F, L, J models)
  • Page 89 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE VIDEO SECTION BLOCK DIAGRAM (J model) IC24 IC10 CEC Microprocessor HDMI Transmitter MN103SFD76YAB SiI9134CTU NTSC: 14.3181MHz PAL: 17.7344MHz 28.636363MHz Q800 SDAL C2412 SCLL IC91-93 SDTN IC85 /VSY -6dB AIN6 SCKN CVOUT P[20:29] Y[0:9] Y[0:9] SVDET /INTH_RT /OSDCE LC74782 C[0:9]...
  • Page 90 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE POWER SUPPLY SECTION BLOCK DIAGRAM /4ohm AC _ BL RY105 AC _ BH MAIN (1) • See page 115 → RY105 SCHEMATIC DIAGRAM AC12 +12V IC104 FUNCTION (1) • See page 112 → -12V • See page 113 →...
  • Page 91 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE CONTROL SECTION BLOCK DIAGRAM...
  • Page 92 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE I PRINTED CIRCUIT BOARDS Ref no. Location Ref no. Location D142 D800 D143 D805 DIGITAL INPUT HDMI DIGITAL P.C.B. (Side A) D144 D806 DIGITAL U, C, R, T, K, A, B, G, E, F, L models OPTICAL COAXIAL D145...
  • Page 93: R Model

    RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE DIGITAL P.C.B. (Side B) U, C models R, T, K, A, B, G, E, F, L, J models J model RX-V863 (U, C models) HTR-6180 (U model) • Semiconductor Location Ref no. Location Ref no. Location D111 D801 D153...
  • Page 94 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE RX-V863 HTR-6180 (U, F models) FUNCTION (1) P.C.B. (Side A) AUDIO MULTI CH INPUT ZONE 2 PRE OUT PHONO MD/CD-R DTV/CBL FRONT SURROUND CENTER / FRONT SURROUND SUR. BACK CENTER / SUB- (6CH) SUBWOOFER (SINGLE) SUB- WOOFER 2 IN (PLAY)
  • Page 95 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE FUNCTION (1) P.C.B. (Side B) RX-V863 U, C models HTR-6180 (U, F models) IC225 C, R, T, K, A, G, E, F, L, J models IC201 U, C, R, T, K, A, G, E, F, L, J models IC226...
  • Page 96 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE FUNCTION (3) P.C.B. (Side A) FUNCTION (3) P.C.B. (Side B) U, C, R, T, A, B, G, E, F, L, J models AC OUTLTE(S) K model RX-V863 (U, C models) HTR-6180 (U model) J model CB258 U, C, R, T, A, B, G, E, F, L models...
  • Page 97 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE FUNCTION (2) P.C.B. (Side A) FUNCTION (4) P.C.B. (Side A) FUNCTION (5) P.C.B. (Side A) FUNCTION (5) P.C.B. (Side B) J model R, L models B model B model POWER TRANSFORMER TUNER AC IN W2601B CB262 CB261 FUNCTION (1)
  • Page 98 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE OPERATION (1) P.C.B. (Side A) RX-V863 HTR-6180 (U, F models) B model SCKN SDTN /CEFD SCEN2 SCEN1 SCEN0 ADKEY1 ADKEY0 TONEB TONEA SYSW /RSTFD MASW PDLED /PSW /MIC OPERATION (2) (CB421) DIGITAL (CB30) SPEAKERS OPERATION (5) ZONE ZONE 2...
  • Page 99 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE OPERATION (1) P.C.B. (Side B) RX-V863 HTR-6180 (U, F models) U, C, R, T, K, A, G, E, F, L, J models RX-V863 HTR-6180 (U, F models) IC402 • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location...
  • Page 100 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE OPERATION (2) P.C.B. (Side A) OPERATION (2) P.C.B. (Side B) OPERATION (1) (W403) POWER TRANSFORMER CB421 CB422 SYSTEM MAIN ZONE RX-V863 ON/OFF HTR-6180 (U, F models) STANDBY ON/OFF HTR-6180 (C model) DSP-AX863SE DSP-AX863 OPERATION (3) P.C.B. (Side A) OPERATION (3) P.C.B.
  • Page 101 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE OPERATION (4) P.C.B. (Side A) OPERATION (4) P.C.B. (Side B) DIGITAL (CB46) FUNCTION (1) (CB201) W442 W441 IC441 J model JK441 U, C, R, T, K, A, B, G, E, F, L models OPTICAL AUDIO VIDEO S VIDEO VIDEO AUX OPERATION (5) P.C.B.
  • Page 102 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE MAIN (1) P.C.B. (Side A) SPEAKERS FRONT B/ZONE B/ FRONT A CENTER SURROUND SURROUND BACK/BI-AMP ZONE 2/PRESENCE • Semiconductor Location L (SINGLE) Ref no. Ref no. Ref no. Ref no. Location Location Location Location + / - + / -...
  • Page 103 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE MAIN (2) P.C.B. (Side A) FUNCTION (1) FUNCTION (3) (CB245) MAIN (1) DIGITAL (CB251) VIDEO (1) (CB62) U model DIGITAL (CB82) (W100A) (CB303) DIGITAL (CB38) J model U, C models W110 W113 W114 W107 W100B W108 W109 IC101 IC102...
  • Page 104 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE VIDEO (1) P.C.B. (Side A) VIDEO (1) P.C.B. (Side B) FUNCTION (6) (CB296) CB304 MAIN (2) (W114) IC333 IC332 IGND -12V J model DACVBS DASC DASY ADCVBS ADSC ADSY TXDI J model RXDI IPAP IPDET DKID VPWR /MTMON /MTVR2...
  • Page 105 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE VIDEO (2) P.C.B. (Side A) VIDEO (2) P.C.B. (Side B) U, C, R, T, K, A, B, G, E, F, L models ADPb ADPr IC383 DAPb DAPr LSEL1 LSEL0 SCLL SDAL DIGITAL (CB81) IC351 J model • Semiconductor Location Ref no.
  • Page 106 RX-V863/HTR-6180/DSP-AX863/DSP-AX863SE MEMO MEMO MEMO MEMO...
  • Page 107 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 SCHEMATIC DIAGRAMS DIGITAL 1/5 HDMI DVR (U, C, R, T, K, A, B, G, E, F, L models) DTV/CBL (U, C, R, T, K, A, B, G, E, F, L models) IC10: SiI9134CTU VCR (J model) DVR (J model)
  • Page 108 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 DIGITAL 2/5 Page 115 Page 112 to MAIN (2)_W113 to FUNCTION (1)_W2506 Page 114 Page 115 Page 115 Page 113 Page 112 POINT A-3 XL30 (Pin 20 of IC30) (J model) (U model) to OPERATION (1)_CB401 to MAIN (1)_W103...
  • Page 109 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 DIGITAL 3/5 Page 114 to OPERATION (4)_W442 to DIGITAL 2/5 DSP- DSP- RX-V863/ RX-V863/HTR-6180 RX-V863 RX-V863 AX863 AX863SE HTR-6180 IC48 11.9 REGULATOR IC57 SELECTOR IC57 -11.4 IC54 IC50 XM/DT IC PL/PR FL/FR (U, C models) SL/SR SBL/SBR ANALOG IN DIGITAL IN No replacement part available.
  • Page 110 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 DIGITAL 4/5 Page 112 Page 115 Page 114 to FUNCTION (1)_CB205 to MAIN (2)_W107 to OPERATION (1)_W401 DSP-AX863 RX-V863/HTR-6180 RX-V863 RX-V863 DSP-AX863SE RX-V863/HTR-6180 RX-V863 HTR-6180 ANALOG IN 11.9 IC67 IC63 IC67 -11.4 2ch ADC 11.9 IC68 NE5532DR NE5532DR 2ch DAC...
  • Page 111 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 DIGITAL 5/5 IC85: LC74782JM-8A16-TLMC Page 116 Page 117 Page 115 The on-screen display controller LSI to VIDEO (1)_CB305 to VIDEO (2)_CB356 to MAIN (2)_W109 Serial 8-bits latch parallel converter command decoder Horizontal Vertical Horizontal Vertical 31 inking Display RAM write...
  • Page 112: Master Volume

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 FUNCTION 1/2 IC202: R2A15218FP 8-channel electronic volume with 11 input selector and tone control AUDIO MULTI CH INPUT PRE OUT 49 48 46 45 38 37 34 33 A VCC AVCC MUTE AVEE N.C. A VEE N.C. TREL 0/-6/-12/-18dB...
  • Page 113 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 FUNCTION 2/2 FUNCTION (9) 10.8 IC220 CB247 IC220 -10.4 FUNCTION (5) B model Page 112 to FUNCTION (1)_CB243 FUNCTION (6) POWER CABLE CB297 (U, C, R, T, K, A, B, G, E, F, L models) Page 116 Page 117...
  • Page 114 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 OPERATION OPERATION (4) OPERATION (5) IC441 VOLUME W442 OPTICAL Page 109 to DIGITAL_CB46 JK441 S VIDEO DSP-AX863 RX-V863 DSP-AX863SE HTR-6180 VIDEO -23.9 -18.5 VIDEO AUX -23.6 -18.3 -22.0 -23.3 Page 112 -16.7 -23.7 -15.0 -20.2 to FUNCTION (1)_CB201 INPUT -25.8...
  • Page 115 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 MAIN 57.0 57.0 56.9 57.0 -0.6 56.7 FRONT B/ZONE B/ -0.6 ZONE2/PRESENCE DSP-AX863 RX-V863/HTR-6180 RX-V863 RX-V863/HTR-6180 DSP-AX863SE HTR-6180 FRONT A -0.6 -0.6 -56.9 -56.9 SURROUND -53.9 -54.5 BACK L -54.5 -55.1 SPEAKERS CENTER 57.0 57.0 56.7 SURROUND -0.6 -0.6...
  • Page 116 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 VIDEO 1/2 CB302 Page 112 to FUNCTION (1)_W2503 11.5 IC331 IC305 CB303 IC331 -11.9 Page 115 to MAIN (2)_W114 JK301 IC301: TC4051BF Multiplexer/demultiplexer -4.8 I/O c O/I I/O c O/I I/O c O/I -4.8 I/O c O/I I/O c O/I...
  • Page 117 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 VIDEO 2/2 (J model) INPUT SELECTOR SELECTOR IC383: TC74HC4052AF IC351: NJM2581M Analog multiplexer/demultiplexer Video amplifier VIN1 Driver INHIBIT 0x, 0y BIAS BINARY TO 1-OF-4 NEE1 VOUT1 LEVEL 1x, 1y DECODER WITH INHIBIT CONVERTER 2x, 2y 3x, 3y VIN2 Driver...
  • Page 118: Replacement Parts List

    RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING G Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. G The chip resistor is not supplied as a replacement part.
  • Page 119 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 120 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 121 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 122 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 123 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 124 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 125 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 126 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL ✻ New Parts...
  • Page 127 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. DIGITAL and P.C.B. FUNCTION ✻ New Parts...
  • Page 128 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. FUNCTION ✻ New Parts...
  • Page 129 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. FUNCTION ✻ New Parts...
  • Page 130 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. FUNCTION ✻ New Parts...
  • Page 131 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. FUNCTION ✻ New Parts...
  • Page 132 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. FUNCTION ✻ New Parts...
  • Page 133 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. FUNCTION ✻ New Parts...
  • Page 134 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. OPERATION ✻ New Parts...
  • Page 135 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. OPERATION ✻ New Parts...
  • Page 136 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. MAIN ✻ New Parts...
  • Page 137 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. MAIN ✻ New Parts...
  • Page 138 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. MAIN ✻ New Parts...
  • Page 139 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. MAIN ✻ New Parts...
  • Page 140 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. MAIN and P.C.B. VIDEO ✻ New Parts...
  • Page 141 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. VIDEO ✻ New Parts...
  • Page 142 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 P.C.B. VIDEO Chip Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω 3100 3100 10 kΩ 7100 7100 HJ35 HF85 HF45 HF45 1.8 Ω ❊ 3180 11 kΩ...
  • Page 143 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • OVERALL ASS’Y R, T, K, A, B, G, E, F models R, L models J model U, C, R, T, K, A, B, G, E, F, L models U, R, T, K, A, G, E, F, L models...
  • Page 144 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 ✻ New Parts ✻ New Parts...
  • Page 145 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • FRONT PANEL and SUB CHASSIS UNIT 3-1 (1) 3-102 U, C, R, T, K, A, G, E, F, L, J models 3-103 3-102 3-4 (1) 3-4 (3) 3-101 3-1 (2) 3-102 3-1 (6) 3-101 3-4 (4) 3-4 (5)
  • Page 146 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • AMP UNIT 2-104 2-104 2-24 2-104 2-20 2-106 2-105 2-103 2-1 (1) 2-105 2-11 ✻ New Parts...
  • Page 147 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 I REMOTE CONTROL G RAV329 (U, C models), RAV330 (R, T, A, L, J models) • SCHEMATIC DIAGRAM • PANELS FORMAT : NEC FORMAT RAV329 (U, C models) RAV330 (R, T, A, L, J models) CARRIER FREQ. : 37.9 kHz...
  • Page 148 00001-Yamaha Receiver CD (Default-slide switch Source) 62907-Yamaha CD MD/CD 71292-Yamaha CD-R 82918-Yamaha Digital Tuner *1 SIRIUS 82176-Yamaha Digital Tuner *1 42543-Yamaha DVD DTV/CBL None (can be set as a DVD, DVD-R, VCR, PVR, TV, CBL, SAT, LD, CD, CD-R, MD, Tape and Tuner)
  • Page 149 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 G RAV372 (K, B, G, E, F models) • SCHEMATIC DIAGRAM • PANELS VBAT SOURCE Spring+ 0028 2006 7017 7002 100n 7011 BC875B 5002 BC857B 4 x AAA Batteries 7009 P3.1/... BC847B 7010 XOUT P3.0/... 3019 VBAT 6003 3002 TEST P2.4/INT9...
  • Page 150 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863 • KEY LAYOUT • KEY CODE AMP library 2001 (default) AMP library 2002 Label Area Learn Macro Luminous MAIN ZONE2 ZONE3 MAIN ZONE2 ZONE3 – – – – – – – – – – – – Linked with IR signal...
  • Page 151 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863...
  • Page 152 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863...
  • Page 153 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863...
  • Page 154 RX-V863/HTR-6180/DSP-AX863SE/DSP-AX863...
  • Page 155 RX-V863/HTR-6180/ DSP-AX863SE/DSP-AX863...

This manual is also suitable for:

Rx-v863Htr-6180Dsp-ax863

Table of Contents