hit counter script
Yamaha HTR-6180 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. HTR-6180
  6. Owner's manual

Yamaha HTR-6180 Owner's Manual

Yamaha stereo receiver user manual
Hide thumbs Also See for HTR-6180:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
U
HTR-6180
AV Receiver
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Yamaha HTR-6180

Summary of Contents for Yamaha HTR-6180

  • Page 1 HTR-6180 AV Receiver OWNER’S MANUAL...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”...
  • Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
  • Page 4 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Table Of Contents

    INTRODUCTION Features ... 2 Supplied accessories ... 2 Notice ... 3 Getting started ... 4 Quick start guide ... 5 PREPARATION Connections ... 10 Optimizing the speaker setting for your listening room (YPAO) ... 32 Using AUTO SETUP ... 32 BASIC OPERATION Selecting the SCENE templates...

  • Page 6: Features

    ◆ Analog video up-scaling from 480i (NTSC)/576i (PAL) or 480p/576p to 720p, 1080i or 1080p DOCK terminal ◆ DOCK terminal to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10, sold separately) Other features ◆...

  • Page 7: Notice

    – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

  • Page 8: Getting Started

    GETTING STARTED ■ Installing batteries in the remote control Take off the battery compartment cover. Insert the two supplied batteries (AA, R6, UM-3) according to the polarity markings (+ and –) on the inside of the battery compartment. Snap the battery compartment cover back into place.

  • Page 9: Quick Start Guide

    The following steps describe the easiest way to enjoy DVD movie playback in your home theater. See pages 11 to 15 for details of the speaker placement. Front right speaker Video monitor Subwoofer Front left speaker Center speaker DVD player Surround back left Surround left speaker...

  • Page 10: Setting Up Speakers

    Quick start guide Step 1: Set up your speakers Place your speakers in the room and connect them to this unit. PRE OUT SUBWOOFER 1 jack AUDIO MULTI CH INPUT PRE OUT FRONT (8CH) CENTER SINGLE PHONO (PLAY) CD-R (REC) DTV/CBL SB (8CH) SURROUND...

  • Page 11: Connect Dvd Player And Other Components

    • Connecting an external amplifier jack • Connecting a DVD player via analog multi-channel audio connection • Connecting a Yamaha iPod universal dock or Bluetooth adapter • Using the REMOTE IN/OUT jacks • Using the VIDEO AUX jacks on the front panel...

  • Page 12: Press Scene 1 Button

    SCENE button. The SCENE templates are built combinations of input sources and sound field programs. If you connect a Yamaha product that has capability of the SCENE control signals, this unit can automatically activate the component and start playback. Refer to the instruction manual of the DVD player for further information.

  • Page 13: Additional Feature

    ■ After using this unit... Press K MAIN ZONE ON/OFF to set this unit to the standby mode. This unit is set to the standby mode and consumes a small amount of power in order to receive infrared signals from the remote control.

  • Page 14: Connections

    CONNECTIONS Rear panel AUDIO PHONO (PLAY) CD-R (REC) DTV/CBL MD/CD-R MD/CD-R DTV/CBL DIGITAL OPTICAL COAXIAL SIRIUS OUTPUT DIGITAL INPUT FRONT B/ZONE B/ FRONT A ZONE 2/PRESENCE EXTRA SP 75Ω UNBAL. HD Radio ANTENNA REMOTE TRIGGER +12V 15mA MAX. Name 1 XM jack (U.S.A.

  • Page 15: Placing Speakers

    The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions. Subwoofer(s) The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the high fidelity sound of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources.
  • Page 16 Connections ■ 6.1-channel speaker layout See page 14 for connection information. We recommend that you also add the presence speakers for the effect sounds of the CINEMA DSP sound field program. See page 13 for details. Speaker indications FL/FR: Front left/right C: Center 30˚...

  • Page 17: Using Presence Speakers

    ■ Using presence speakers The presence speakers supplement the sound from the front and surround back speakers with extra ambient effects produced by the sound field programs (see page 48). You can adjust the vertical position of dialogues with using the presence speakers (see page 75).

  • Page 18: Connecting Speakers

    Connections Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. Caution • Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet. •...
  • Page 19 ■ For the 6.1-channel speaker setting Center speaker EXTRA SP terminals (see page 14) AUDIO (PLAY) CD-R (REC) DTV/CBL D-R MD/CD-R DTV/CBL OPTICAL COAXIAL DIGITAL INPUT FRONT B/ZONE B/ ZONE 2/PRESENCE FRONT A EXTRA SP TRIGGER 5mA MAX. Right Left Front speakers (FRONT A) ■...

  • Page 20: Connecting The Speaker Cable

    Connections ■ Connecting the speaker cable Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist the exposed wires of the cable together to prevent short circuits. 10 mm (0.4 in) Loosen the knob. Red: positive (+) Black: negative (–) Insert one bare wire into the hole on the side...

  • Page 21: Information On Jacks And Cable Plugs

    Information on jacks and cable plugs Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with. Audio jacks and cable plugs AUDIO DIGITAL COAXIAL (White) (Red) (Orange) Left and right Coaxial analog audio digital audio cable plugs...

  • Page 22: Information On Hdmi

    Connections Information on HDMI™ ■ HDMI signal compatibility Audio signals Audio signal Audio signal types formats 2ch Linear 2ch, 32-192 kHz, 16/20/24 bit Multi-ch 8ch, 32-192 kHz, Linear PCM 16/20/24 bit 2/5.1ch, 2.8224 MHz, 1 bit Bitstream Dolby Digital, Bitstream (High Dolby TrueHD, definition audio) Dolby Digital Plus,...

  • Page 23: Audio And Video Signal Flow

    Audio and video signal flow ■ Audio signal flow Input HDMI DIGITAL AUDIO (COAXIAL) DIGITAL AUDIO (OPTICAL) AUDIO Digital output Analog output Notes • 2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at one of the HDMI IN jacks can be output at the HDMI OUT jack only when “S.AUDIO”...

  • Page 24: Connecting A Tv Monitor Or Projector

    Connections Connecting a TV monitor or projector Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit. Make sure that this unit and other components are unplugged from the AC wall outlets.

  • Page 25: Connecting Other Components

    Connecting other components Make sure that this unit and other components are unplugged from the AC wall outlets. Notes • When “VIDEO CONV.” is set to “OFF” (see page 98), be sure to make the same type of video connections as those made for your TV (see page 20).

  • Page 26: Connecting A Dvd Recorder, Pvr Or Vcr

    Connections ■ Connecting a DVD recorder, PVR or VCR (U.S.A. model) AUDIO MULTI CH INPUT FRONT (8CH) (PLAY) CD-R (REC) DTV/CBL SB (8CH) MD/CD-R DTV/CBL OPTICAL COAXIAL DIGITAL INPUT SPEAKERS FRONT B/ZONE B/ FRONT A CENTER SURROUND ZONE 2/PRESENCE EXTRA SP ■...

  • Page 27: Connecting Audio Components

    ■ Connecting audio components Notes • To make a digital connection to a component other than the default component assigned to each the DIGITAL INPUT jack or the DIGITAL OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT”...

  • Page 28: Connecting An External Amplifier

    Connections ■ Connecting an external amplifier This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks. Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
  • Page 29 Bluetooth adapter This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10 sold separately). Connect a...
  • Page 30 SCENE control signals of the components. • If the component connected to the REMOTE OUT jack is not the Yamaha product, set “SCENE IR” in the advanced setup menu to “OFF” (see page 112). Using the VIDEO AUX jacks on the...
  • Page 31 If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

  • Page 32: Connecting The Power Cable

    Connections Connecting the power cable (U.S.A. model) MONITOR OUT AC OUTLETS SWITCHED 120V 80Hz 100W MAX. TOTAL 0.8A MAX. TOTAL To the AC wall outlet ■ AC OUTLETS (SWITCHED) Use these 2 outlets to supply power to any connected components. Connect the power cable of your other components to these 2 outlets.

  • Page 33: Turning This Unit On And Off

    Turning this unit on and off ■ Turning on this unit Press K MAIN ZONE ON/OFF (or D POWER) to turn on this unit. The main zone is turned on. • When you turn on this unit, there will be delay for a few seconds before this unit can reproduce sound.

  • Page 34: Front Panel Display

    Lights up when the adaptive dynamic range control feature is turned on (see page 91). 3 DOCK indicator • Lights up when you station your iPod in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 25) and V-AUX is selected as the input source.
  • Page 35 D SP A B indicators Light up according to the set of front speakers activated (see page 43). SP A: The FRONT A speakers are activated. SP B: The FRONT B speakers are activated. SP A B: The FRONT A and FRONT B speakers are activated.

  • Page 36: Optimizing The Speaker Setting For Your Listening Room (Ypao)

    OPTIMIZING THE SPEAKER SETTING FOR YOUR LISTENING ROOM (YPAO) Optimizing the speaker setting for your listening room (YPAO) This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening environment.
  • Page 37 Press 8 l / h to select the desired setting for “EXTRA SP ASSIGN” and then press 8 n. Extra speaker assignment EXTRA SP ASSIGN Selects the function of the speakers connected to the EXTRA SP terminals. Choices: FRONT B, ZONE2, ZONE B, PRESENCE, NONE •...
  • Page 38 Optimizing the speaker setting for your listening room (YPAO) Press 8 n to select “START” and then press 8 ENTER to start the setup procedure. The following message appears in the OSD. When this unit starts the automatic setup procedure, loud test tones are output at the speakers.
  • Page 39 Press 8 k and then 8 ENTER to display the setup results in detail. AUTO SETUP . RESULT 3/4/0.1 DIST: 14.0/17.0ft LVL : -9.0/+6.5dB > CANCEL [ ]/[ ]:Up/Down [ENTER]:Detail RESULT WIRING FRONT L;;;;;;;OK [ ]/[ ]:Select [ENTER]:Return Press 8 l / h repeatedly to toggle between the setup result displays.
  • Page 40 Optimizing the speaker setting for your listening room (YPAO) Press 8 ENTER to confirm your selection. The top “SET MENU” screen appears in the OSD. SET MENU . ;AUTO SETUP ;MANUAL SETUP .A;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter Press I SET MENU to exit from “SET MENU”.

  • Page 41: Selecting The Scene Templates

    Selecting the SCENE templates This unit is equipped with 19 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button (see page 8): SCENE 1: DVD Viewing SCENE 2: Disc Listening SCENE 3: TV Viewing SCENE 4: Radio Listening...
  • Page 42 Vinyl records Note When iPod is connected to the Yamaha iPod universal dock or a Bluetooth component is connected to the Bluetooth adapter, this unit plays back the audio sources input at the DOCK terminal. You can create your original SCENE templates by editing the preset SCENE templates. See page 40 for details.
  • Page 43 Select this SCENE template when you enjoy SIRIUS Satellite Radio programs. 7ch Enhancer MUSIC ENHANCER Select this SCENE template when you play back music on your iPod stationed in a Yamaha iPod universal dock or 7ch Enhancer Bluetooth component that is connected to the Bluetooth adapter. Straight Select this SCENE template when you enjoy general programs on your TV.

  • Page 44: Creating Your Original Scene Templates

    Selecting the SCENE templates Creating your original SCENE templates You can create your original SCENE templates for each SCENE button. You can refer to the preset 19 SCENE templates to create the original SCENE templates. Create an original SCENE Select the desired SCENE template Viewing SCENE template library...

  • Page 45: Using The Remote Control For The Scene Feature

    Using the remote control for the SCENE feature ■ Controlling the input source components in the SCENE mode You can operate both this unit and the input source component by using the remote control. You must set the appropriate remote control code for each input source in advance (see page 104).

  • Page 46: Playback

    PLAYBACK Caution Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS.

  • Page 47: Selecting The Multi Ch Input Component

    Before performing the following operations, set the operation mode selector on the remote control to F AMP. Selecting the MULTI CH INPUT component Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 25) as the input source.

  • Page 48: Selecting Audio Input Jacks (Audio Select)

    Playback Before performing the following operations, set the operation mode selector on the remote control to F AMP. Selecting audio input jacks (AUDIO SELECT) This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.

  • Page 49: Using Your Headphones

    Using your headphones Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel. EDIT CATEGORY SPEAKERS SEARCH MODE BAND A/B/C/D/E PRESET/TUNING/CH MEMORY INFO SCENE PROGRAM INPUT PHONES SYSTEM OFF TONE CONTROL STRAIGHT PURE DIRECT AUDIO SELECT...

  • Page 50: Displaying The Input Source Information

    Playback Displaying the input source information You can display the audio and video information of the current input signal. Set the operation mode selector to F AMP and then press I SET MENU on the remote control. The top “SET MENU” display appears in the OSD. SET MENU .

  • Page 51: Using The Sleep Timer

    Using the sleep timer Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLETS (see page 28).

  • Page 52: Sound Field Programs

    This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a Yamaha digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

  • Page 53: For Various Sources

    LIVE/CLUB Program This program simulates a live house with a low ceiling and homey atmosphere. A realistic, live sound Cellar Club field features powerful sound as if the listener is in a row in front of a small stage. This is the sound field of a rock music live house in Los Angeles, with approximately 460 seats. The The Roxy Theatre listener’s virtual seat is at the center left of the hall.
  • Page 54 Sound field programs Program This program is ideal for precisely reproducing the sound design of action and adventure movies. The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded Adventure widely to the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio channels and the clarity of the sound.

  • Page 55: Enjoying Unprocessed Input Sources (Straight Decoding Mode)

    ■ Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers. It creates virtual speakers to reproduce the natural sound field. When you set “SUR. L/R SP” NONE”...

  • Page 56: Using Audio Features

    USING AUDIO FEATURES Before performing the following operations, set the operation mode selector on the remote control to F AMP. Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks.

  • Page 57: Fm/Am Tuning

    Overview You can use two tuning modes to tune into the desired FM/AM station: Frequency tuning mode (AUTO TUNING/MANUAL TUNING) You can search or specify the frequency of the desired FM/AM station automatically or manually (see “Basic tuning operations” on this page). Preset tuning mode (PRESET TUNING) You can preset the desired FM/AM station in advance, and then recall the station by specifying the preset group and number (see “Using station preset feature”...

  • Page 58: Using Station Preset Feature

    FM/AM tuning • When this unit is tuned into a station, the TUNED indicator lights up. • Hold down the button to continue searching when this unit is in the manual tuning mode. • Press G INFO (or 0 INFO) repeatedly to toggle the frequency information and sound field program information in the front panel.
  • Page 59 ■ Automatic station preset You can use the automatic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) in order. (U.S.A. model only) You can use the automatic preset tuning feature to store up to 40 AM HD Radio, FM HD Radio, and analog FM radio stations with strong signals.

  • Page 60: Exchanging Preset Stations

    FM/AM tuning Press E PRESET/TUNING/CH l / h (or 8 PRESET/CH k / n) repeatedly to select a preset station group and number (A1 to E8) while the MEMORY indicator is flashing. • Press E h (or 8 k) to select a higher preset station group and number.

  • Page 61: Using Hd Radio™ Features (U.s.a. Model Only)

    Using HD Radio™ features (U.S.A. model only) HD Radio technology is a new technology that enables FM and AM radio stations to broadcast programs digitally. Digital broadcasting provides listeners with radically improved audio quality and reception as well as new data services. Furthermore, supplemental program services allow listeners to select from up to 8 HD Radio programs multicast on a single FM HD Radio channel.

  • Page 62: Displaying Hd Radio™ Information

    Using HD Radio™ features (U.S.A. model only) Displaying HD Radio™ information Use this feature to display the HD Radio information in the front panel display or video monitor. ■ Front panel display Press G INFO (or 0 INFO) repeatedly to toggle between the following HD Radio information displays.

  • Page 63: Xm Satellite Radio Tuning

    XM Satellite Radio tuning XM Radio offers an extraordinary variety of commercial-free music, plus the best in premier sports, news, talk radio, stand-up comedy, children’s and entertainment programming. XM is broadcast in superior digital audio quality from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan. XM Satellite Radio online information For U.S.

  • Page 64: Activating Xm Satellite Radio

    XM Satellite Radio tuning Activating XM Satellite Radio Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM Dock to ® your XM Ready home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming.

  • Page 65: All Channel Search Mode

    Before performing the following operations, set the operation mode selector on the remote control to F SOURCE and then press 4 XM. ■ All Channel Search mode Press B SEARCH MODE (or I SRCH MODE) repeatedly to select “ALL CH SEARCH”.

  • Page 66: Setting The Xm Satellite Radio Preset Channels

    XM Satellite Radio tuning Before performing the following operations, set the operation mode selector on the remote control to F SOURCE and then press 4 XM. Setting the XM Satellite Radio preset channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups).

  • Page 67: Displaying The Xm Satellite Radio Information

    Before performing the following operations, set the operation mode selector on the remote control to F SOURCE and then press 4 XM. Displaying the XM Satellite Radio information You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or in the OSD.

  • Page 68: Sirius Satellite Radio™ Tuning

    SIRIUS SATELLITE RADIO™ TUNING SIRIUS Satellite Radio™ tuning SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and 100% commercial-free music. Only SIRIUS has more than 65 original music channels, from today’s hits to R&B, oldies, and classical masterpieces. From authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more.

  • Page 69: Activating Sirius Satellite Radio™ Subscription

    Activating SIRIUS Satellite Radio™ subscription Before using the SIRIUS Satellite Radio feature, you need to activate your SIRIUS Satellite Radio subscription. To activate the subscription you need the Sirius ID which is uniquely assigned to the SiriusConnect tuner. Sirius ID is 12-digit number and it appears on the package of the SiriusConnect tuner, on the label of the SiriusConnect tuner, and when you tune into the SIRIUS Satellite Radio...
  • Page 70 SIRIUS Satellite Radio™ tuning Before performing the following operations, set the operation mode selector on the remote control to F SOURCE and then press 4 SIRIUS. ■ All Channel Search mode Press B SEARCH MODE (or I SRCH MODE) repeatedly to select “ALL CH SEARCH”.

  • Page 71: Setting The Sirius Satellite Radio™ Preset Channels

    Before performing the following operations, set the operation mode selector on the remote control to F SOURCE and then press 4 SIRIUS. Setting the SIRIUS Satellite Radio™ preset channels You can use this feature to store up to 40 SIRIUS Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups).
  • Page 72 SIRIUS Satellite Radio™ tuning Press 8 k / n repeatedly to select “SIRIUS” and then press 8 ENTER. The following menu screen appears. SIRIUS . INPUT RENAME VOL. TRIM;;;;;0.0dB PARENTAL LOCK [ ]/[ ]:Up/Down [ENTER]:Enter Press 8 n repeatedly to select “PARENTAL LOCK”...

  • Page 73: Displaying The Sirius Satellite Radio™ Information

    Before performing the following operations, set the operation mode selector on the remote control to F SOURCE and then press 4 SIRIUS. Displaying the SIRIUS Satellite Radio™ information You can display the SIRIUS Satellite Radio information (such as channel number, channel name, category, artist name, composer name, or song title) for the currently selected channel in the front panel display or in the OSD.

  • Page 74: Using Ipod

    AUDIO OUT (REC) jacks for recording. • Your iPod battery is automatically charged when your iPod is stationed in a Yamaha iPod universal dock connected to the DOCK terminal of this unit as long as this unit is turned on. You can also select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode by selecting the “STANDBY CHARGE”...
  • Page 75 ■ Controlling iPod in the menu browse mode You can perform the advanced operations of your iPod using the supplied remote control with the aid of the OSD of this unit. You can browse the songs stored on your iPod in the OSD.

  • Page 76: Using Bluetooth™ Components

    Using Bluetooth™ components You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component.

  • Page 77: Recording

    Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Caution The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources encoded in DTS, the following considerations and adjustments need to be made.

  • Page 78: Advanced Sound Configurations

    ADVANCED SOUND CONFIGURATIONS Advanced sound configurations Changing sound field parameter settings You can enjoy good quality sound with the initial factory settings. Although you do not have to change the initial factory settings, you can change some of the parameters to better suit the input source or your listening room.
  • Page 79 ■ Basic configuration of sound field programs Each sound field program has some parameters defining the characteristics of the program. To customize the selected sound field program, adjust “DSP LEVEL” and/ or “DIALG.LIFT” first, and then try other parameters. To change sound field parameter settings, see page 74 for details. Adjusting the effect sound level of the sound field programs (DSP LEVEL) Sound field programs add effect sounds (DSP effect...
  • Page 80 Advanced sound configurations ■ Sound field parameters for the advanced configurations Use the following sound field parameters to customize sound field programs in detail. To change sound field parameter settings, see page 74 for details. Sound field parameter INIT.DLY Initial delay. Presence, surround, and surround back sound field initial delay. Changes the apparent distance from the source sound by adjusting the delay between the direct sound and the P.INIT.DLY first reflection heard by the listener.
  • Page 81 Sound field parameter ROOM SIZE Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound field becomes. As the P.ROOM SIZE sound is repeatedly reflected around a room, the larger the hall is, the longer the time between S.ROOM SIZE the original reflected sound and the subsequent reflections.
  • Page 82 Advanced sound configurations Sound field parameter REV.TIME Reverberation time. Adjusts the amount of time taken for the dense, subsequent reverberation sound to decay by 60 dB at 1 kHz. This changes the apparent size of the acoustic environment over an extremely wide range. Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time for “live”...

  • Page 83: Selecting Decoders

    Sound field parameter DIRECT 2-channel stereo direct. Bypasses the decoders and the DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. (“2ch Stereo” only) Choices: AUTO, OFF • Select “AUTO” to bypass the decoders, the DSP processors and the tone control circuitry only when “BASS”...
  • Page 84 Advanced sound configurations ■ Decoder descriptions (SUR.) Decoder Pro Logic Dolby Pro Logic processing for any sources. PLIIx Movie Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources. PLII Movie decoder is not available when “SUR.B L/R SP” is set to “NONE” ( PLIIx Music Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources.
  • Page 85 Decoder parameter descriptions Decoder parameter PANORAMA Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect. (“PLIIx Music” and “PLII Music” only) Choices: OFF, ON DIMENSION Pro Logic IIx Music and Pro Logic II Music dimension.

  • Page 86: Customizing This Unit (Manual Setup)

    CUSTOMIZING THIS UNIT (MANUAL SETUP) Customizing this unit (MANUAL SETUP) You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
  • Page 87 Volume menu 2 VOLUME MENU Parameter ADAPTIVE DRC Selects whether this unit automatically adjusts the dynamic range in conjunction with the volume level or not. ADAPTIVE DSP LEVEL Selects whether this unit adjusts the DSP effect level automatically in conjunction with the volume level or not.
  • Page 88 (U.S.A. and Canada models only) START PAIRING Pair the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a Bluetooth component (see page 72). Selects the video source played back in the background of the sources input at the MULTI CH INPUT jacks.
  • Page 89 Menu Parameter C)MEMORY GUARD — D)INIT. CONFIG AUDIO SELECT DECODER MODE EXTD SUR. E)HDMI SET S.AUDIO F)ZONE2 SET MAX VOL. INIT. VOL. ■ Signal information SIGNAL INFO Use this feature to check audio and video signal information (see page 46). Customizing this unit (MANUAL SETUP) Functions Prevents accidental changes to sound field program parameter values...

  • Page 90: Using Set Menu

    Customizing this unit (MANUAL SETUP) Using SET MENU Use the remote control to access and adjust each parameter. • You can change the “SET MENU” parameters while this unit is reproducing sound. • If you press R PARAMETER during the “SET MENU” operation, the “SET MENU”...

  • Page 91: Basic Menu

    1 BASIC MENU Use this feature to manually adjust the basic speaker settings. Most of the “BASIC MENU” parameters are set automatically when you run the automatic setup. 1 BASIC MENU A)SPEAKER SET B)SP LEVEL C)SP DISTANCE D)TEST TONE [ ]/[ ]: Up/Down Enter [ENTER]:...
  • Page 92 Customizing this unit (MANUAL SETUP) Measure for the speaker size The woofer section of a speaker is – 16 cm (6.5 in) or larger: large – smaller than 16 cm (6.5 in): small Front speakers FRONT SP A)SPEAKER SET FRONT SP SMALL >LARGE Choice Descriptions...
  • Page 93 Bass cross over CROSS OVER Use this feature to select the crossover frequency of all the speakers set to “SML” (or “SMALL”) in “SPEAKER SET” (see page 87). All frequencies below the selected frequency will be sent to the subwoofer(s) or front speakers depending on the setting of “LFE/BASS OUT”...

  • Page 94: Speaker Distance

    Customizing this unit (MANUAL SETUP) ■ Speaker distance C)SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations.

  • Page 95: Volume Menu

    2 VOLUME MENU Use this menu to manually adjust the various volume settings. 2 VOLUME MENU ADAPTIVE DRC;;;;OFF ADAPTIVE DSP LEVEL;;;;OFF MUTE TYPE;;;;FULL MAX VOL.;;;;+16.5dB INIT. VOL.;;;;;;OFF Up/Down [ ]/[ ]: [p]/[[]: Select Adaptive dynamic range control ADAPTIVE DRC Use this feature to adjust the dynamic range in conjunction with the volume level.

  • Page 96: Sound Menu

    Customizing this unit (MANUAL SETUP) 3 SOUND MENU Use this feature to adjust the audio parameters. 3 SOUND MENU A)EQUALIZER B)LFE LEVEL C)DYNAMIC RANGE D)LIPSYNC E)EXTD SUR. Up/Down [ ]/[ ]: Enter [ENTER]: ■ Equalizer A)EQUALIZER Use this feature to select the parametric equalizer or the graphic equalizer.

  • Page 97: Dynamic Range

    ■ Low-frequency effect level B)LFE LEVEL Use this feature to adjust the output level of the LFE (low- frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes.
  • Page 98 Customizing this unit (MANUAL SETUP) ■ Audio and video synchronization (lip sync) D)LIPSYNC Use this feature to adjust the audio and video synchronization. D)LIPSYNC HDMI AUTO;;;;;;OFF AUTO;;;;;;;;;---ms (offset;;;---ms) MANUAL;;;;;;;;;0ms [ ]/[ ]: Up/Down Select [p]/[[]: HDMI automatic lip sync mode HDMI AUTO If the connected video monitor is connected to the HDMI OUT jack of this unit and compatible with the automatic audio and video synchronization function (automatic lip...

  • Page 99: Input Menu

    4 INPUT MENU Use this menu to adjust the parameters of each input source. 4 INPUT MENU 4 INPUT MENU A) SIRIUS H) DTV/CBL PHONO TUNER K) BLUETOOTH F) MD/CD-R N) MULTI CH Up/Down [ ]/[ ]: [ ]/[ ]: [ENTER]: Enter [ENTER]:...
  • Page 100 Customizing this unit (MANUAL SETUP) Input rename INPUT RENAME Use this feature to change the name of the input source that appears in the OSD and in the front panel display. INPUT RENAME DVR . [p]/[[]: Position Character [ ]/[ ]: Enter [ENTER]: [RETURN]:...
  • Page 101 Start pairing START PAIRING Use this feature to start pairing the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with your Bluetooth component. For details about the pairing, refer to “Pairing the Bluetooth™ adapter and your Bluetooth component” on page 72.

  • Page 102: Option Menu

    Customizing this unit (MANUAL SETUP) 5 OPTION MENU Use this menu to adjust the optional system parameters. 5 OPTION MENU A)DISPLAY SET B)VIDEO SET C)MEMORY GUARD D)INIT. CONFIG E)HDMI SET F)ZONE2 SET Up/Down [ ]/[ ]: Enter [ENTER]: ■ Display settings A)DISPLAY SET Note Use “VIDEO”...
  • Page 103 Notes • This unit does not convert 480 line video signals and 576 line video signals interchangeably. • The analog component video signals with 480i (NTSC)/576i (PAL) of resolution are converted into the S-video or composite video signals and output at the S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks.
  • Page 104 Customizing this unit (MANUAL SETUP) ■ Memory guard C)MEMORY GUARD Use this feature to prevent accidental changes to sound field program parameter and other system settings. C)MEMORY GUARD >OFF Select [p]/[[]: [ENTER]: Return Choice Functions Turns off the “MEMORY GUARD” feature. Protects: –...
  • Page 105 ■ HDMI set E)HDMI SET Use this feature to select the component to play back HDMI audio signals. E)HDMI SET S. AUDIO;;;;HTR-6180 Select [p]/[[]: [ENTER]: Return Support audio S.AUDIO Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.

  • Page 106: Remote Control Features

    REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input source (see page 104).

  • Page 107: Controlling Other Components

    ■ Controlling other components Set the operation mode selector to F SOURCE to control other components selected with the input selector buttons ( 4 ). You must set the appropriate remote control code for each input source in advance (see page 104). The following table shows the function of each control button used to control other components assigned to each input selector button ( 4 ).

  • Page 108: Setting Remote Control Codes

    – PHONO Note You may not be able to operate your Yamaha component even if a Yamaha remote control code is preset as listed above. In this case, try setting another Yamaha remote control code. Press one of the input selector buttons ( 4 ) on the remote control to select the control area you want to set up.

  • Page 109: Resetting All Remote Control Codes

    Resetting all remote control codes Use this feature to clear all the remote control codes previously set and reset all of them to the initial factory settings. Press 2 CODE SET using a ballpoint pen or a similar object. The B TRANSMIT indicator on the remote control flashes twice.

  • Page 110: Using Multi-Zone Configuration

    Yamaha dealer or service center about the Zone 2 connections that best meet your requirements. • Some Yamaha models are able to connect directly to the REMOTE jacks of this unit. If you own these products, you may not need to use an infrared signal emitter.

  • Page 111: Controlling Zone 2

    (U.S.A. and Canada models only). • Enjoying music stored on your iPod stationed in a Yamaha iPod universal dock (such as YDS-10 sold separately) connected to the DOCK terminal of this unit when “V-AUX” is selected as the input source (see page 70).
  • Page 112 Using multi-zone configuration Operate the following operations after activating the Zone 2 operation mode. Operating Zone 2 Rotate the R INPUT selector to select the desired input source while the ZONE2 indicator is flashing in the front panel display. • Select “TUNER” as the input source to use the TUNER features in Zone 2.

  • Page 113: Advanced Setup

    This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Notes •...
  • Page 114 ■ Remote control AMP ID Use this feature to set the AMP ID of this unit for remote control recognition. This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately. Choices: ID1, ID2 •...
  • Page 115 See page 109 for the operation of the advanced setup. ■ Remote control XM ID REMOTE XM (U.S.A. and Canada models only) Use this feature to set the XM ID of this unit for remote control recognition. Choices: ID1, ID2 •...
  • Page 116 SCENE mode. Choices: ON, OFF • Select “ON” when the component connected to the REMOTE OUT jack is the Yamaha component and has the capability of the SCENE control signals. This unit automatically sends the remote control signals to the component.

  • Page 117: Troubleshooting

    Play a source whose signals can be reproduced by this unit. Connect HDMI components that support the HDCP copy protection standards. Set “S.AUDIO” to “HTR-6180” in “MANUAL SETUP”. Set “VIDEO CONV.” to “ON” or connect your source components in the same way as you connect your video monitor to this unit.
  • Page 118 Troubleshooting Problem Only the center When playing a monaural source with a speaker outputs sound field program, the source signal is substantial sound. directed to the center channel, and the front and surround speakers output effect sounds. No sound is heard “CENTER SP”...
  • Page 119 Problem The volume level The component connected to the AUDIO cannot be increased, OUT (REC) jacks of this unit is turned off. or the sound is distorted. The sound effects It is not possible to record the sound effects cannot be recorded. with a recording component.
  • Page 120 Troubleshooting ■ Tuner (FM/AM) Problem FM stereo reception is The characteristics of FM stereo noisy. broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. There is distortion, and There is multi-path interference. clear reception cannot be obtained even with a good FM antenna.

  • Page 121: Xm Satellite Radio

    ■ XM Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message CHECK XM TUNER The XM Mini-Tuner is not installed in the XM Mini-Tuner Dock or the XM Mini-...
  • Page 122 Troubleshooting ■ SIRIUS Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message ANTENNA ERROR The antenna is not connected to the SiriusConnect tuner properly.
  • Page 123 The Bluetooth adapter is not connected to the DOCK terminal. Cause Turn off this unit and reconnect the Yamaha iPod universal dock to the DOCK terminal of this unit. Try resetting your iPod. Only iPod (Click and Wheel), iPod nano, and iPod mini are supported.

  • Page 124: Auto Setup

    Troubleshooting ■ AUTO SETUP Before AUTO SETUP Error message Connect MIC! Optimizer microphone is not connected. Unplug HP! Headphones are connected. Memory Guard! The parameters of this unit are protected. During AUTO SETUP Error message E-1:NO FRONT SP Front L/R channel signals are not detected. E-2:NO SUR SP A surround channel signal is not detected.
  • Page 125 • If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “AUTO SETUP” again. • If a warning message “W-1”, “W-2”, or “W-3” appears, corrections are made, but they may not be optimal. • If an error message “E-10” occurs repeatedly, contact a qualified Yamaha service center. Cause Check the speaker connections for proper polarity (+ or –).

  • Page 126: Resetting The System

    RESETTING THE SYSTEM Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. • The initial factory settings are activated next time you turn on this unit. To cancel the initialization procedure at any time without making any changes, press L SYSTEM OFF on the front panel.

  • Page 127: Glossary

    ■ Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem and a capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustments, HDMI version 1.3 incorporates an automatic audio and video syncing capability that allows devices to perform this synchronization automatically and accurately...

  • Page 128: Dolby Surround

    Glossary ■ Dolby Surround Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range.
  • Page 129 ■ LFE 0.1 channel This channel reproduces low-frequency signals. The frequency range of this channel is from 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduced by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

  • Page 130: Sound Field Program Information

    The acoustics in your room could be changed to those of a concert hall, a dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what Yamaha has done with the digital sound field processor. ■ CINEMA DSP...

  • Page 131: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround back 1 kHz, 0.7% THD, 8 Ω ... 120 W • Dynamic Power (IHF) Front L/R, 8/6/4/2 Ω ... 140/175/205/250 W • Maximum Output Power [Russia model] Speaker impedance setting: 8 Ω, 1 kHz, 0.7% THD, 4 Ω ...
  • Page 132 Specifications GENERAL • Power Supply [U.S.A. and Canada models] ... AC 120 V, 60 Hz [Russia model] ... AC 230 V, 50 Hz • Power Consumption [U.S.A. and Canada models] ... 400 W/500 VA [Russia model] ... 440 W • Standby Power Consumption [U.S.A.

  • Page 133: Index

    ■ Numerics 1 BASIC MENU, Manual setup ... 82 2 VOLUME MENU, Manual setup ... 83 2ch STEREO, Sound field program ... 50 3 SOUND MENU, Manual setup ... 83 4 INPUT MENU, Manual setup ... 84 5 OPTION MENU, Manual setup ... 84 7ch Enhancer, Sound field program ...
  • Page 134 Index ■ D)INIT. CONFIG, Option menu ... 100 D)LIPSYNC, Sound menu ... 94 D)TEST TONE, Basic menu ... 90 Decoder descriptions ... 80 Decoder indicators ... 30 DECODER MODE, Initial configuration ... 100 Decoder mode, Initial configuration ... 100 DECODER MODE, Input menu ... 96 Decoder mode, Input menu ...
  • Page 135 LIVE/CLUB, Sound field category ... 49 LIVENESS, Sound field parameter ... 77 Liveness, Sound field parameter ... 77 LOADING, XM Satellite Radio status message ... 117 Loading..., iPod status message ... 119 Low-frequency effect level, Sound menu ... 93 LVL, Auto setup result ... 34 ■...
  • Page 136 Index ■ S VIDEO jacks ... 17 S.Audio, HDMI set ... 101 S.INIT.DLY, Sound field parameter ... 76 S.LIVENESS, Sound field parameter ... 77 S.ROOM SIZE, Sound field parameter ... 77 SB INI.DLY, Sound field parameter ... 76 SB LEVEL, Sound field parameter ...
  • Page 137 Video conversion, Video settings ... 98 Video information ... 46 VIDEO jacks ... 17 Video jacks ... 17 Video signal flow ... 19 Video sources in the background ... 45 Virtual CINEMA DSP ... 51 VIRTUAL indicator ... 31 VOL. TRIM, Input menu ... 96 VOLUME level indicator ...

  • Page 138: Front Panel

    ■ Front panel SPEAKERS MAIN ZONE PHONES SYSTEM OFF TONE CONTROL ON/OFF SILENT CINEMA EDIT CATEGORY SEARCH MODE BAND A/B/C/D/E PRESET/TUNING/CH MEMORY SCENE PROGRAM STRAIGHT PURE DIRECT AUDIO SELECT EFFECT VOLUME ZONE 2 ZONE INFO ON/OFF CONTROL INPUT VIDEO AUX OPTIMIZER MIC S VIDEO VIDEO...

  • Page 139: Remote Control

    ■ Remote control CODE SET POWER POWER TUNER DOCK V-AUX TV VOL TV CH TV MUTE TV INPUT PROG STRAIGHT PURE DIRECT MULTI CH IN AUDIO SEL LEVEL TITLE BAND RETURN MEMORY INFO TRANSMIT STANDBY POWER SIRIUS CD-R PHONO SOURCE VOLUME MUTE ENHANCER...

  • Page 140: List Of Remote Control Codes

    List of remote control codes MOTOROLA CABLE TV RECEIVER 10033 A-MARK 10008, 10144 10003, 10007, MULTITECH 10008, 10011, MYRIO 10014, 10033, 10237 NOVA VISION 10008 ACCUPHASE 10003, 10007, NOVAPLEX 10011, 10014 ACORN 10237 ACTION 10237 PACE ACTIVE 10237 AICHI DENSHI11512 PANASONIC AMERICAST 10899 AMINO...
  • Page 141 MEMOREX 10724 ADMIRAL MITSUBISHI 10749 MOTOROLA 10856, 10869 10496, 11270, 11519 NETSAT 10099 ADVENT NEXT LEVEL 10869 OPTIMUS 10724 OPTUS 11356 ADVENTURI 20000 PACE 11356 AGNA PANASAT 10879 AIKO PANASONIC 10214, 10247, AIWA 10701, 11508, AKAI 11526, 11527, 11528 PANSAT 11807 PAYSAT 10724...
  • Page 142 HARVARD 20180 LLOYD'S HAVERMY 20093 HEATHKIT 20017 LOGIK HELIOS 20865 LUMATRON HELLO KITTY 20451 HEWLETT PACKARD 21088, 21089, 21101, 21494, 21502, 21642 HISENSE 20748, 21660 HITACHI 20000, 20017, 20036, 20047, 20051, 20054, 20145, 20178, 20179, 21145, MACY 21150, 21245, 21345, 21378, MAGNASONIC 21445 21088, 21089,...
  • Page 143 20180, 20236, 20017 20451, 20463 20156 WYSE 21365 20036, 20060, XR-1000 20154, 20171, 20145, 20150, 20179, 20180 20154, 20156, YAMAHA 20030, 20769, 20166, 20264, 20833, 20839, 20509, 20650, 21405, 21406, 20832, 20845, 21407, 21526, 21145, 21156, 21522 21164, 21169, YORX...
  • Page 144 ADYSON 30072 CYBERPOWER31972 AIKO 30278 DAEWOO AIWA 30000, 30037, 30124, 30307, 30348, 30479, 31137, 31284, 31291, 31332, DAYTRON 31336 AKAI 30041, 30049, 30061, 30106, DELL 30175, 30242 DENON ALBA 30072, 30209, DERWENT 30278, 30295 DIRECTV ALIENWARE 31972 DUAL ALLEGRO 30039, 31137 DUMONT AMERICA ACTION DURABRAND 30038, 30039...
  • Page 145 30042, 30043, 30045, 30046, 30047, 30048, 30060, 30062, 30065, 30072, 30081, 30149, 30212, 30240, 30479, 30760 WHARFEDALE 30593 WHITE WESTINGHOUSE 30000, 30072, 30209, 30278, 30479, 30637 WORLD 30002, 30209, 30479 XR-1000 30000, 30035, 30072, 30208, 30240 YAMAHA 30038, 30041 viii...
  • Page 146 ZENITH 30000, 30033, CAMBRIDGE SOUNDWORKS 30034, 30037, 30039, 30041, CARY AUDIO DESIGN 30209, 30278, CAVS 30479, 30637, 31137, 31139, CELESTIAL 31479 CENTREX ZT GROUP 31972 CENTRIOS CINEA CINEMATRIX 41052 DVD PLAYER CINEVISION 40833, 40869, 3D LAB 40503, 40539 ACCURIAN 40675, 41072, CITIZEN 41416, 41737 ACOUSTIC SOLUTIONS...
  • Page 147 40633, 40770, WINTEL 41131 41043, 41077, WYSE 41652 41889 XBOX 40522, 41708, 40533, 40839 42083 XWAVE 41001 40674 YAMAHA 40490, 40497, 40539, 40545, 40784 40817, 41282, 42543, 42544 40690, 40730 YAMAKAWA 40872 ZENITH 40503, 40591, 40783, 40869, 40741, 40869 41099 ZEUS...
  • Page 148 60145, 60179, UNIVERSUM 60437 60305, 60420, VICTOR 60072 60437, 60468, WARDS 60032, 60053, 61063, 61075 60087, 60157, 60029, 60303, 60179 60388, 60752, YAMAHA 60036, 60490, 61682 60868, 60888, 61292, 62907, 60029 62909 60157, 60274, 60625 60626 YORX 60000 60032, 60305,...
  • Page 149 81123, 81284, VICTOR 80074 81343, 81384, WARDS 80014, 80080, 81678, 81823, 80158, 80189 81935, 81986 81406, 81414, 81846 81414 YAMAHA 80176, 80186, 81922 80376, 81023, 81254 81176, 81276, 80039 81331, 81375, 81476, 81815, 80080, 80346, 81949, 82176, 80360, 80530, 82177, 82178,...
  • Page 150 YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA...
  • Page 151 SYSTEM OFF TONE CONTROL ON/OFF SILENT CINEMA EDIT CATEGORY SEARCH MODE BAND A/B/C/D/E PRESET/TUNING/CH SCENE PROGRAM STRAIGHT PURE DIRECT AUDIO SELECT EFFECT ZONE 2 ZONE MEMORY INFO ON/OFF CONTROL INPUT VIDEO AUX OPTIMIZER MIC S VIDEO VIDEO HTR-6180 VOLUME AUDIO OPTICAL...
  • Page 152 ■ Remote control CODE SET POWER TUNER DOCK V-AUX TV VOL TV MUTE STRAIGHT MULTI CH IN LEVEL TITLE BAND RETURN MEMORY TRANSMIT POWER POWER STANDBY SIRIUS CD-R PHONO SOURCE TV CH VOLUME TV INPUT MUTE PROG ENHANCER SUR. DECODE PURE DIRECT PARAMETER AUDIO SEL...

This manual is also suitable for:

Htr-6180bl - htr 6180 av receiver

Table of Contents