hit counter script
Toshiba Satellite A300 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite A300 Series
  6. User manual

Toshiba Satellite A300 User Manual

Hide thumbs Also See for Satellite A300:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual
TOSHIBA
Satellite A300/
Satellite Pro A300/
Satellite A300D/
Satellite Pro A300D series
User's Manual
Downloaded from LpManual.com Manuals

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite A300

Summary of Contents for Toshiba Satellite A300

  • Page 1 TOSHIBA Satellite A300/ Satellite Pro A300/ Satellite A300D/ Satellite Pro A300D series User’s Manual Downloaded from LpManual.com Manuals...
  • Page 2 © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior writ- ten permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 3 Bluetooth™ is a registered trademark owned by its proprietor and used by TOSHIBA under license. DVD MovieFactory is trademarks of the Ulead Systems. Inc. Labelflash™ is a trademark of YAMAHA CORPORATION. Manufactured under license from Dolby Laboratories. “Dolby” and the dou- ble-D symbol are trademarks of Dolby Laboratories.

  • Page 4: Safety Instructions

    Safety instructions Use the following safety guidelines to help to protect yourself and your computer. When using your computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.

  • Page 5: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, and...
  • Page 6 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.

  • Page 7: Region Selection

    Modem warning notice Conformity statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
  • Page 8 Redial Up to two redial attempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experiencing prob- lems with the Black Listed code, set the interval between redials at one minute or longer.

  • Page 9: Telephone Company Procedures

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.
  • Page 10 Instructions for IC CS-03 certified equipment The Industry Canada label identifies certified equipment. This certifica- tion means that the equipment meets certain telecommunications net- work protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements docu- ment(s).
  • Page 11 Notes for users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia.
  • Page 12 ■ Some parameters required for compliance with Telecom’s PTC Specifications are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: (a) There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, (b) The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the...

  • Page 13: General Conditions

    ■ The transmit level from this device is set at a fixed level and because of this there may be circumstances where the performance is less than optimal. Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone performance is impaired.
  • Page 14 ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the Environmental Protection Agency’s (EPA) ® ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR ®...

  • Page 15: Optical Disc Drive Safety Instructions

    Optical disc drive standards TOSHIBA Satellite A300/Satellite Pro A300/Satellite A300D/Satellite Pro A300D series computer is shipped with one of the following drives preinstalled: DVD Super Multi (+-R DL), DVD Super Multi (+-R DL) /w Label Flash, HD DVD-ROM, or HD DVD-RW drive.
  • Page 16 DVD Super Multi (+-R DL) drive Panasonic UJ-870B/UJ-870F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima Hakata-ku Fukuoka, Japan HLDS GSA-T40N/GSA-T40F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 17 PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Storage Technology Korea Corporation 416, Maetan-3Dong, Yeongtong-Gu, Suwon City, Gyeonggi-Do, 443-742, Korea Downloaded from LpManual.com Manuals...
  • Page 18 HD DVD-ROM drive Toshiba SD-L802B Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED TOSHIBA CORPORATION 1-1-1, SHIBAURA, MINATO-KU, TOKYO 105-8001, JAPAN...
  • Page 19 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...

  • Page 20: Important Notice

    Dispose of used batteries according to the manufacturer’s instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. Downloaded from LpManual.com Manuals User’s Manual...

  • Page 21: Table Of Contents

    Special features ......... 1-12 TOSHIBA Value Added Package ......1-14 Utilities and applications .
  • Page 22 Keyboard indicators ........2-12 Optical disc drive .
  • Page 23 TOSHIBA Disc Creator ........4-35...
  • Page 24 Connecting ......... . . 4-44 Disconnecting .
  • Page 25 Retaining data with power off ......6-10 Extending battery life ........6-10 Replacing the battery pack .
  • Page 26 TOSHIBA support ........

  • Page 27: Specifications

    Wireless LAN ......... . . 10-4 Non-applicable icons .

  • Page 28: Preface

    Preface Congratulations on your purchase of the TOSHIBA Satellite A300/Satellite Pro A300/Satellite A300D/Satellite Pro A300D series computer. This pow- erful, lightweight notebook computer is designed to provide years of relia- ble, high-performance computing. This manual tells how to set up and begin using your Satellite A300/Satellite Pro A300/Satellite A300D/Satellite Pro A300D series computer.
  • Page 29 Preface Chapter 5, Keyboard, describes special keyboard functions including the keypad overlay and hot keys. Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program.
  • Page 30 Preface When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the typeface you see to the left. Display Names of windows or icons or text generated by the computer that appear on its display screen are presented in the typeface you see to the left.

  • Page 31: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 32: Instruction Manual For Safety And Comfort

    General Precautions Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 33: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use.

  • Page 34: Software

    ■ TOSHIBA ConfigFree ■ TOSHIBA Disc Creator ■ TOSHIBA DVD PLAYER (Is preinstalled with DVD Super Multi (+-R DL) drive model) ■ TOSHIBA Face Recognition (Is preinstalled with some models) ■ TOSHIBA HD DVD PLAYER (Is preinstalled with HD DVD-ROM drive or HD DVD-RW drive model) ■...

  • Page 35: Features

    Introduction Features This computer incorporates the following features and benefits: Processor Built-in Please visit your region’s website for the configuration details of the model that you have purchased. Memory Slots PC2-5300 512 MB, 1024 MB or 2048 MB memory modules can be installed in the two memory slots.
  • Page 36 Introduction Video RAM Depending on the model you purchased. ® Mobile Intel GM965 Express Chipset/Mobile ® Intel GL960 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. ® Mobile Intel GM965 Express Chipset/Mobile ®...

  • Page 37: Disks

    Introduction Disks Hard disk drive The computer has one or two integrated, 2 1/2" hard disk drive(s) for nonvolatile storage of data (HDD) and software(depending on the model you purchased). It comes in the following sizes. ■ 80 GB ■ 120 GB ■...
  • Page 38 Introduction Some models are equipped with a full-size DVD DVD Super Multi (+-R Super Multi (+- R DL) drive module that allows DL) drive you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD- ROMs at maximum 24 speed.
  • Page 39 Introduction Some models are equipped with a full-size HD HD DVD-ROM drive DVD-ROM drive module that allows you to run CD/DVD/HD DVDs without using an adaptor. The drive reads DVD-ROMs at a maximum 8x speed, CD-ROMs at a maximum 24x speed, and HD DVDs at a maximum 1x speed.
  • Page 40 Introduction Some models are equipped with a full-size HD HD DVD-RW drive DVD-RW drive module that allows you to run CD/DVD/HD DVDs without using an adaptor. The drive reads DVD-ROMs at a maximum 8x speed, CD-ROMs at a maximum 24x speed, and HD DVD-ROMs at a maximum 2.4x speed.

  • Page 41: Keyboard

    Introduction Keyboard ® Built-in 86 keys or 87 keys, compatible with IBM enhanced keyboard, embedded numeric overlay, dedicated cursor control, keys. See Chapter 5, Keyboard, for details. Pointing device A touchpad and control buttons in the palm rest Built-in enable control of the on-screen pointer. Power The computer is powered by one rechargeable Battery pack...

  • Page 42: Slots

    Introduction Infrared receiver This is a sensor window that receives signals window from the remote controller which is provided with your computer. (Provided with some models) Slots Multiple digital media This slot allows you to easily transfer data from slot devices, such as digital cameras and Personal Digital Assistants, that use flash memory (SD/SDHC/MS/MS Pro/MMC/xD memory cards).

  • Page 43: Security

    Windows Vista™ is available. Refer to the preinstalled Software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities and applications section in this chapter.

  • Page 44: Special Features

    Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. To access the Power Options, click Start → Control Panel → System and Maintenance → Power Options.
  • Page 45 Introduction Panel power on/off This feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened. This can be specified in the Power Options. Low battery When battery power is exhausted to the point automatic that computer operation cannot be continued, the hibernation mode...

  • Page 46: Toshiba Value Added Package

    ■ TOSHIBA utility launcher function ■ When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Flash Cards are completely active.

  • Page 47: Utilities And Applications

    TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and services. HW Setup utility To start the utility, click the Windows Start button, point to All Programs, click TOSHIBA, click Utilities, and select HWSetup icon.
  • Page 48 Introduction TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. You can boot ConfigFree from the menu bar as follows.

  • Page 49: Options

    This has the same function as the Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. Options You can add a number of options to make your computer even more powerful and convenient to use.
  • Page 50 1BRS/ PA3533U-1BAS), 6 cell type (PA3534U- 1BRS/ PA3534U-1BAS) and 9 cell type (PA3535U-1BRS/ PA3535U-1BAS) can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement.

  • Page 51: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position.
  • Page 52 The Grand Tour Front edge logo indicates the computer series Front edge logo you bought. (The availability of this function depends on the model you purchased.) Slide this switch toward the right of the computer Wireless to turn on Wireless communication. Slide it communication toward the left of the computer to turn off the switch...

  • Page 53: Left Side

    The Grand Tour Left side Figure 2-2 shows the computer’s left side. JACK AN VENT XPRESS ARD SLOT IDEO OUT PORT HDMI OUT PORT XTERNAL MONITOR PORT PORTS .LINK (IEEE1394) PORT EPENDING ON THE MODEL YOU PURCHASED Figure 2-2 The left side of the computer This 15-pin port allows you to connect an external External monitor monitor.
  • Page 54 The Grand Tour Universal serial The two universal serial bus (USB) ports comply bus (USB 2.0) with USB Serial 2.0 standards, which enables ports data transfer speeds 40 times faster than the USB 1.1 standards. The ports with the icon ( ) has USB Sleep and Charge function and also support USB 1.1.

  • Page 55: Right Side

    The Grand Tour Right side Figure 2-3 shows the computer’s right side. ODEM JACK ECURITY LOCK SLOT DC IN 19V PTICAL DISC DRIVE PORTS TUNER JACK EPENDING ON THE MODEL YOU PURCHASED Figure 2-3 The right side of the computer Universal serial The two universal serial bus (USB) ports comply bus (USB 2.0)

  • Page 56: Back Side

    The Grand Tour Modem jack In areas where an internal modem is installed as standard equipment, there is a modem jack that allows you to use a modular cable to connect the modem directly to a telephone line. The modem is not supported in some marketing regions.

  • Page 57: Underside

    Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery release Slide this latch to release the battery pack.

  • Page 58: Front With The Display Open

    The Grand Tour Front with the display open Figure 2-6 shows the front of the computer with the display open. To open the display, lift the display up and position the display at a comfortable viewing angle. EB CAMERA UILT IN MICROPHONE LED* EB CAMERA...
  • Page 59 The Grand Tour Fingerprint Just by swiping the finger against the fingerprint sensor, the following functions will be enabled sensor (Provided with some models): ■ Logon to Windows and access a security- enabled homepage through IE (Internet Explorer). ■ Files and folders can be encrypted/decrypted and third party access to them prevented.

  • Page 60: Function Button

    Press this button to launch an application CD/DVD/HD DVD program that allows Windows Media Player / button TOSHIBA DVD PLAYER / TOSHIBA HD DVD PLAYER. (HD DVD playback function is provided with some models) Press this button to begin playing an audio CD, a Play/Pause DVD movie or digital audio files.

  • Page 61: System Indicators

    The Grand Tour System indicators Figure 2-7 shows the system indicators, which light when various computer operations are in progress. ULTIPLE DIGITAL MEDIA CARD HDD/ODD BATTERY DC IN OWER Figure 2-7 System indicators The DC IN indicator glows white/green when DC DC IN power is supplied from the AC power adaptor.

  • Page 62: Keyboard Indicators

    The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the CAPS LOCK indicator. When the CAPS LOCK indicator glows the keyboard is in all-caps mode. CAPS LOCK INDICATOR Figure 2-8 CAPS LOCK indicator CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format.

  • Page 63: Optical Disc Drive

    The Grand Tour Optical disc drive A DVD Super Multi (+-R DL) drive, a HD DVD-ROM drive or a HD DVD-RW drive. When the computer is accessing a CD/DVD/HD DVD, an indicator on the drive glows. About the HD DVD This section describes the features, use of HD DVD and HD DVD Media.

  • Page 64: Region Codes For Dvd Drives And Media

    The Grand Tour ■ Viewing of HD DVD content on an external display requires a HDCP capable HDMI or DVI input on the external display. ■ Make sure to connect the computer's AC adaptor when playing a HD DVD. ■ CPU power is concentrated on HD DVD playback when playing a HD DVD, so make sure to exit all other applications.

  • Page 65: Writable Discs

    This section describes the types of writable CD/DVD/HD DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics ■...

  • Page 66: Dvd Super Multi (+-R Dl) Drive

    The Grand Tour DVD Super Multi (+-R DL) drive The full-size DVD Super Multi drive (+-R DL) module allows you to record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 67: Hd Dvd-Rw Drive

    The Grand Tour HD DVD-RW drive The full-size HD DVD-RW drive module allows you to record data to rewrit- able CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
  • Page 68 The Grand Tour Full size remote controller AUSE OWER ECORD EWIND ORWARD EPLAY ORE INFORMATION RROWS TART OLUME OLUME HANNEL UIDE ECORDED VD MENU UMBERS NTER LEAR Figure 2-10 Full size remote controller Downloaded from LpManual.com Manuals User’s Manual 2-18...
  • Page 69 The Grand Tour Power Starts or terminate the operating system. This button functions like the power button of your computer. By default, the Sleep mode is equivalent to the power off state of your computer. To change the setting, click Start →...
  • Page 70 The Grand Tour More information The button provides more detail information. Arrows Moves the cursor to navigate within Media Center windows. Selects the desired action or window option. It acts like the ENTER Key. Volume + Increases the volume while viewing DVDs or replaying CDs.

  • Page 71: Slim Size Remote Controller

    CD/DVD/HD DVD Press this button to launch an application button program that allows Windows Media Player / TOSHIBA DVD PLAYER / TOSHIBA HD DVD PLAYER. (HD DVD playback function is provided with some models) Decreases the computer’s display panel Brightness down brightness in individual steps.
  • Page 72 The Grand Tour Increases the computer’s display panel Brightness up brightness in individual steps. Power Starts or terminate the operating system. This button functions like the power button of your computer. By default, the Sleep mode is equivalent to the power off state of your computer.

  • Page 73: Using The Remote Controller

    The Grand Tour Start Opens Media Center to the main window. Rewind Moves the media (video, DVD, music, and so on) backwards. Play/Pause Plays the selected media. This button also acts as a pause button. Fast forward Moves the media (video, DVD, music, and so on) forwards.
  • Page 74 The Grand Tour DEGREES DEGREES VERTICALLY NFRARED RECEIVER DEGREES WINDOW EMOTE CONTROLLER HE APPEARANCE OF THE PROVIDED REMOTE CONTROLLER MAY VARY FROM MODEL TO MODEL AND IT IS NOT PROVIDED WITH SOME MODELS Figure 2-12 Operational range of the remote controller Even if within the effective scope as described above, the remote controller may malfunction or not work correctly in the following cases.

  • Page 75: Installing/Removing Batteries

    The Grand Tour Installing/Removing batteries Be sure to install the provided AA type or CR2016 type batteries before using the remote controller. The procedures for installing and removing the batteries vary depending on the type of the remote controller. Check the type and then install or remove the batteries as instructed.

  • Page 76: Installing The Batteries

    The Grand Tour Installing the batteries Full size remote controller 1. Open the battery cover on the back side of the remote controller. Slide the cover in the direction of the arrow to remove the cover. ATTERY OVER Figure 2-13 Opening the battery cover 2.
  • Page 77 The Grand Tour Slim size remote controller 1. Open the battery cover on the back side of the remote controller. ATTERY OVER Figure 2-16 Opening the battery cover 2. Be sure to place the batteries with correct polarities. Press the battery down to the stopper then push it forward to fit into the battery case.

  • Page 78: Replacing The Batteries

    The Grand Tour Replacing the batteries When the batteries in the remote controller reach the end of their life, the remote controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.

  • Page 79: Placing Slim Size Remote Controller

    The Grand Tour Placing slim size remote controller Inserting a slim size remote controller To insert the slim size remote controller, follow the setps below. 1. Make sure the ExpressCard slot is empty. 2. Set the front side upward and insert the slim size remote controller. LIM SIZE REMOTE CONTROLLER Figure 2-21 Inserting the slim size remote controller 3.

  • Page 80: Ac Adaptor

    Figure 2-22 The AC adaptor (2-pin plug) Figure 2-23 The AC adaptor (3-pin plug) ■ Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 81: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability. ■...

  • Page 82: Connecting The Ac Adaptor

    Chapter 6, Power and Power-up Modes. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 83: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. To open the display, lift the panel up and adjust it to the best viewing angle. While you open the display, hold the base of the computer to avoid raising Figure 3-3 Opening the display panel Turning on the power This section describes how to turn on the power...

  • Page 84: Starting Up For The First Time

    Getting Started Starting up for the first time When you first turn on the power, the computer’s initial screen is the Microsoft ® Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of three modes:shut down (Boot) , hibernation mode or sleep mode.

  • Page 85: Starting Hibernation Mode

    Getting Started Benefits of hibernation mode The hibernation feature provides the following benefits: ■ Saves data to the hard disk when the computer automatically shuts down because of a low battery. For the computer to shut down in hibernation mode, the hibernation feature must be enabled in the Hibernate tab in Power Options.

  • Page 86: Sleep Mode

    Getting Started Data save in hibernation mode When you turn off the power in hibernation mode, the computer takes a moment to save current memory data to the hard disk. During this time, the HDD/ODD indicator will light. After you turn off the computer and memory is saved to the hard disk, turn off the power to any peripheral devices.

  • Page 87: Restarting The Computer

    Getting Started Executing sleep mode You can also enable sleep mode by pressing FN + F3. See Chapter 5, Keyboard for details. You can enter sleep mode in one of three ways: 1. Click Windows Start button, point to , and then click Sleep. 2.

  • Page 88: System Recovery Options

    Getting Started System recovery options About 1.5 GB hidden partition is allocated on the hard disk drive for the system recovery options. This partition stores files which can be used to repair the system in the event of a problem. System recovery options The system recovery options feature is installed on the hard disk when shipped from the factory.

  • Page 89: Restoring The Preinstalled Software From The Recovery Hdd

    1. Load the Recovery Media in the optional optical disc drive and turn off the computer's power. 2. Hold down the F12 key and turn on the power. When TOSHIBA Leading Innovation>>> appears, release the F12 key. For 2HDDs model, If HDD1 is first, go to the (3.) step.
  • Page 90 Press the F9 key to set to default settings, and select Yes. c. Press the F10 key to save the changes, and select Yes. d. When the TOSHIBA Leading Innovation>>> prompt appears, press the F12 key to display the Boot menu. Go to the (3.)step.

  • Page 91: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, the fingerprint sensor, optical disc drives, Audio/Video controls, the web camera, the microphone, the internal modem, the FM tuner, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVD/HD DVDs.

  • Page 92: Using The Fingerprint Sensor

    Operating Basics Fingerprint sensor OUCHPAD CONTROL BUTTONS OUCHPAD Figure 4-1 Touchpad, touchpad control buttons and fingerpring sensor Using the fingerprint sensor This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints. By enrolling the ID and password to the fingerprint authentication device, it is no longer necessary to input the password from the keyboard.

  • Page 93: How To Swipe The Finger

    Operating Basics How to swipe the finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you.

  • Page 94: Points To Note About The Fingerprint Sensor

    Operating Basics Points to note about the fingerprint sensor Failure to follow these guidelines might result in (1) damage to the sensor or cause sensor failure, (2) finger recognition problems, or lower finger rec- ognition success rate. ■ Do not scratch or poke the sensor with your nails or any hard or sharp objects.

  • Page 95: How To Delete The Fingerprint Data

    Operating Basics ■ The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. ■ Check sliding position and speed. ■ The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint.

  • Page 96: Fingerprint Sensor Limitations

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times.Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

  • Page 97: Windows Logon Via Fingerprint Authentication

    Operating Basics 2. The Enter Windows Password screen is displayed. Enter a password into the Enter Windows Password field. Click Next. 3. The Control Center screen is displayed. Click the non-enrolled finger icon above the finger. 4. The Fingerprint Enrollment screen is displayed. Confirm the message and click Next.

  • Page 98: Fingerprint System Boot Authentication

    ■ It is necessary to register the User Password before using the fingerprint Pre-OS feature and its extended function, the fingerprint Single Sign-On feature. Please use TOSHIBA HW Setup to register the User Password. ■ If you fail fingerprint authentication more than five times, you must enter the User Password or Supervisor Password manually to start the computer.

  • Page 99: Fingerprint Single-Swipe Sign-On Feature

    TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.

  • Page 100: Usb Sleep And Charge Function

    Operating Basics USB Sleep and Charge function Your computer can supply USB bus power (DC5V) to the USB port even when the power of the computer is turned OFF. "Power OFF" includes sleep mode, hibernation mode or shutdown state. This function can only be used for ports that support the USB Sleep and Charge function (hereinafter called "compatible ports").

  • Page 101: How To Enable/Disable Usb Sleep And Charge Function

    Use the TOSHIBA DVD PLAYER application to view DVD-Video discs.(DVD Super Multi (+-R DL) drive model) ■ Use the TOSHIBA HD DVD PLAYER application to view DVD-Video discs or HD DVD-Video discs.(HD DVD-ROM model or HD DVD-RW drive model) If you have a DVD Super Multi (+-R DL) drive or a HD DVD-ROM drive, refer also to the Writing CD/DVDs on DVD Super Multi (+-R DL) drive section for precautions on writing to CD/DVDs.
  • Page 102 Operating Basics b. Pressing the eject button will not open the drawer when the drive’s power is off. If the power is off, you can open the drawer by insert- ing a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
  • Page 103 Operating Basics 3. Lay the CD/DVD/HD DVD, label side up, in the drawer. Figure 4-6 Inserting a CD/DVD/HD DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD/HD DVD tray. Therefore, you will need to turn the CD/DVD/HD DVD at an angle when you place it in the tray.

  • Page 104: Removing Discs

    Operating Basics 5. Push the center of the drawer to close it. Press gently until it locks into place. If the CD/DVD/HD DVD is not seated properly when the drawer is closed, the CD/DVD/HD DVD might be damaged. Also, the drawer might not open fully when you press the eject button.

  • Page 105: Function Button

    Figure 4-9 Function button Icon Function DVD/HD DVD *CD/None button Mute Mute Mute CD/DVD Launch TOSHIBA DVD Launch Windows Media /HD DVD PLAYER or TOSHIBA Player HD DVD PLAYER (HD DVD playback function is provided with some models) Play/Pause Play/Pause...

  • Page 106: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds

    HD DVD playback restrictions HD DVD-ROM drive and HD DVD-RW drive model allow users to enjoy the strong visuals of HD DVD Video. TOSHIBA HD DVD PLAYER software is provided for playback of HD DVD Video. Notes on use HD DVD playback ■...
  • Page 107 Please view HD DVD Video during times when there is no recording pre-scheduled. ■ The resume function cannot be used with some discs on the TOSHIBA HD DVD PLAYER. ■ Make sure to connect the computer's AC adaptor when using the TOSHIBA HD DVD PLAYER.
  • Page 108 Dualview modes) on the computer's display panel and an external display or television. ■ Do not change the screen resolution while running the TOSHIBA HD DVD PLAYER. ■ Audio output through the S/PDIF cannot be recorded when playing a HD DVD in the TOSHIBA HD DVD PLAYER.

  • Page 109: Using Toshiba Hd Dvd Player

    HD DVD drive, the following application selection screen may appear. If this occurs, select Play HD DVD movie or Run the HD DVD Launcher, then click OK to launch the TOSHIBA HD DVD PLAYER. Figure 4-10 Application selection screen 2.
  • Page 110 INIMIZE ISPLAY AREA TOSHIBA HD DVD PLAYER c ONTROL WINDOW Figure 4-11 TOSHIBA HD DVD PLAYER windows Displays video. Double click on the Display Area Display Area to toggle full screen display mode on and off. Click the Display Area to display the Control window when it isn't displayed.

  • Page 111: Open Toshiba Hd Dvd Player Help

    "TOSHIBA HD DVD PLAYER control window" section for more information. Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in TOSHIBA HD DVD PLAYER Help. Click the Help button( ) in the Display Area to open TOSHIBA HD DVD PLAYER Help.
  • Page 112 TOUCH REPLAY CHAPTER Next chapter AUSE LOW MOTION FORWARD REWIND Figure 4-13 TOSHIBA HD DVD PLAYER control window (2) Opens the disc tray. Eject Jumps to the previous chapter. Previous chapter Jumps to the next chapter. Next chapter Stops a HD DVD currently being run.
  • Page 113 EPEAT ETURN ITLE HAPTER RIVE SPECIFICATION SEARCH Figure 4-14 TOSHIBA HD DVD PLAYER control window (3) Switches between available subtitles. Subtitle Switches between audio tracks for titles which Sound have more than 1 audio track. Switches between angles for multi-angle Angle compatible titles.

  • Page 114: Using The Computer In Place Of A Hd Dvd Player

    Operating Basics Using the computer in place of a HD DVD PLAYER Videos played using TOSHIBA HD DVD PLAYER included with the computer can be displayed on a television equipped with a HDMI input port. HD DVD-Video can only be displayed on the computer's display panel or on a television connected to the HDMI out port.

  • Page 115: Switching Between Computer And Television Display

    The following is a HD DVD-Video display compatibility list. O:The display of TOSHIBA HD DVD PLAYER is possible. X:The display of TOSHIBA HD DVD PLAYER is impossible. When using TOSHIBA HD DVD PLAYER...

  • Page 116: Drive

    Some models are equipped with a full-size DVD Super Multi (+-R DL ) drive or HD DVD-ROM drive, which can be used to write data to either CD-R/- RW or DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL discs. The following applications for writing are supplied: TOSHIBA Disc Creator. Ulead DVD ® MovieFactory for TOSHIBA, which is a product of Ulead Systems, Inc.
  • Page 117 Operating Basics DVD-RW: DVD Specifications for DVD-RW Disc for General Version 1.2 MITSUBISHI KAGAKU MEDIA CO., LTD. VICTOR COMPANY OF JAPAN, LTD. DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, 2.1 or 2.2 MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.

  • Page 118: When Writing Or Rewriting

    Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD- R/-RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

  • Page 119: Disclaimer (Dvd Super Multi (+-R Dl) Drive/Hd Dvd-Rom Drive)

    Always copy data from the HDD to the optical disc. Do not use cut-and- paste. The original data will be lost if there is a write error. Disclaimer (DVD Super Multi (+-R DL) drive/HD DVD-ROM drive) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/DVD- RAM disc that may be caused by writing or rewriting with this product.

  • Page 120: Writing Cd/Dvd/Hd Dvds On Hd Dvd-Rw Drive

    Some models are equipped with a full-size HD DVD-RW drive, which can be used to write data to either CD-R or CD-RW, DVD-R, DVD-R DL, DVD- RW, DVD+R, DVD+R DL, DVD-RAM, HD DVD-R, HD DVD-R DL, HD DVD-RW discs. This computer is provided with TOSHIBA Disc Creator and ® ®...

  • Page 121: Legal Footnotes

    Before writing or rewriting ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R, CD-RW, DVD-R, DVD-R DL, DVD- RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM, HD DVD-R, HD DVD- R DL or HD DVD-RW media, however, it must be noted that disc quality can affect write or rewrite success rates.
  • Page 122 Operating Basics DVD-R: DVD Specifications for DVD-R Disc for General Version 2.0 HITACHI MAXELL, LTD. TAIYO YUDEN CO., LTD. DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-RW: DVD Specifications for DVD-RW Disc for General Version 1.2 VICTOR COMPANY OF JAPAN, LTD. DVD+R: MITSUBISHI KAGAKU MEDIA CO., LTD.
  • Page 123 Operating Basics ■ This drive cannot use discs that allow writing faster than 4x speed (DVD-R, DVD+R, DVD-RW and DVD+RW media), 3x speed (DVD- RAM media), 2.4x speed (DVD+R DL media), 2x speed (DVD-R DL and HD DVD-R media) and 1x speed(HD DVD-R DL and HD DVD-RW media).

  • Page 124: When Writing Or Rewriting

    CD/DVD/HD DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 125: Toshiba Disc Creator

    CD Player' function to record music to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, HD DVD-R or HD DVD-RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video, DVD-ROM, HD DVD-R or HD DVD-RW material that has copyright protection.

  • Page 126: Data Verification

    Pack 2. In addition to this, some DVD-ROM and DVD-ROM/CD-RW drives cannot read this added data regardless of the operating system. ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility.

  • Page 127: Video

    Set PRINTING SIDE for underside. 2. Click Start All Programs DVD MovieFactory for TOSHIBA → → → Ulead DVD MovieFactory for TOSHIBA Laucher to lanuch DVD MovieFactory. 3. Click Print Disc Label Label Printing. Ulead Label@Once is → started. 4. Click the General tab.

  • Page 128: How To Learn More About Ulead Dvd Moviefactory

    DVD MovieFactory for TOSHIBA → → → Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Click Video Disc → New Project to invoke 2nd Launcher, choose your project type, then invoke DVD MovieFactory. 3. Add source from HD Disk by click Add Video files button to invoke browser dialog box.
  • Page 129 Operating Basics 2. Before recording the video to DVD ■ When you record DVD disc, please use only discs recommended by the Drive manufacturer. ■ Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD. ■...

  • Page 130: Media Care

    Operating Basics Media care This section provides tips on protecting data stored on your CD/DVD/HD DVD. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVD/HD DVD 1.

  • Page 131: Using The Software

    Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows Vista ; if you need to restart it go to Start → All Programs → Camera Assistant Software → Camera Assistant Software. IDEO RECORDING UDIO RECORDING APTURE STILL IMAGES...

  • Page 132: Using The Microphone

    Operating Basics Settings Chooses from the : Options tab to change the tool position; the Picture tab to select picture output options such as size, export file and saving location; the Video tab to choose output settings such as Frame Rate, Size, Compression and the file save path;...

  • Page 133: Region Selection

    To select a region, follow the steps below. 1. In Windows Vista™, click Start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 134: Connecting

    Operating Basics Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.

  • Page 135: Disconnecting

    Operating Basics Do not pull on the cable or move the computer while the cable is connected. Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector.

  • Page 136: Wireless Communications

    TOSHIBA strongly recommends the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Downloaded from LpManual.com Manuals User’s Manual...

  • Page 137: Bluetoothtm Wireless Technology

    Operating Basics Bluetooth wireless technology Bluetooth wireless technology eliminates the need for cables between electronic devices such as desktop computers, printers and mobile phones. You cannot use the built-in Bluetooth functions and an optional Bluetooth Adaptor simultaneously. Bluetooth wireless technology has the following features: Worldwide operation The Bluetooth radio transmitter and receiver operates in the 2.45 GHz band, which is license-free and compatible with radio systems in most...

  • Page 138: Lan

    Operating Basics Wireless communication Indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Wireless communication switch is set to off. Indicator off Wireless communication switch is on. Indicator glows Wireless LAN or Bluetooth is turned on by an application.

  • Page 139: Connecting Lan Cable

    Operating Basics Connecting LAN cable The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 Mbit/s, 100BASE-TX), be sure to connect with a category 5 cable, CAT5, or higher.

  • Page 140: Disconnecting Lan Cable

    Operating Basics Disconnecting LAN cable To disconnect the LAN cable, follow the steps below. Make sure the LAN active indicator (orange LED) is out before you disconnect the computer from the LAN. 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector.

  • Page 141: Heat Dispersal

    Operating Basics Heat dispersal To protect from overheating, the CPU has an internal temperature sensor. If the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered. You can select whether to control the CPU temperature by turning on the fan first, then if necessary, lowering the CPU speed.

  • Page 142: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer's keyboard layout is compatible with 104/105-key enhanced keyboard. Pressing FN key and other keys can execute all enhaced keyboard function. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available.

  • Page 143: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 144: Hot Keys

    The Keyboard Press FN + F12 (Scroll Lock) to lock the cursor on a specific line. The power on default is off. Press FN + ENTER to simulate ENTER on the enhanced keyboard’s numeric keypad. Press FN + CTRL to simulate the enhanced keyboard’s right CTRL key. Press FN + ALT to simulate the enhanced keyboard’s right ALT key.
  • Page 145 The Keyboard Power plan: Pressing FN + F2 changes the power settings. Sleep: Pressing FN + F3 switches the system to sleep mode. Hibernate: Pressing FN + F4 switches the system to hibernation mode. Output: Pressing FN + F5 changes the active display device. Brightness down: Pressing FN + F6 decreases the computer’s display panel brightness in individual steps.

  • Page 146: Fn Sticky Key

    FN sticky key You can use the Toshiba Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and they press an “F number” key. To start the Toshiba Accessibility Utility, click Start → All Programs →...

  • Page 147: Windows Special Keys

    The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows: one activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Start menu. This key has the same function as the secondary mouse button.

  • Page 148: Numeric Mode

    The Keyboard Numeric mode To turn on the Numeric mode, press FN + F11. The Numeric mode indicator lights. Now try numeric data entry using the keys in figure 5-1. Press FN + F11 again to turn off the overlay. Figure 5-1 The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard...

  • Page 149: Temporarily Changing Modes

    The Keyboard Temporarily changing modes If the computer is in Numeric mode, you can switch temporarily to Arrow mode by pressing SHIFT. If the computer is in Arrow mode, you can switch temporarily to Numeric mode by pressing SHIFT. Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation.

  • Page 150: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 151: Power Indicators

    • LED: Battery trigger point blinking orange DC IN off Battery charge is Computer goes into exhausted hibernation or shuts down (depending on the Toshiba power Management Utility Setting) No battery • No operation installed •LED: Battery off DC IN off...

  • Page 152: Dc In Indicator

    Power and Power-up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected. Indicates the AC adaptor is connected and White/Green supplying proper power to the computer. Indicates a problem with the power supply. Plug Orange the AC adaptor into another outlet.

  • Page 153: Battery

    The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 154: Care And Use Of The Battery Pack

    Power and Power-up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.
  • Page 155 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 156: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Batteries charger to charge the battery pack. Never attempt to charge the battery pack with any other charger Downloaded from LpManual.com Manuals...

  • Page 157: Battery Charging Notice

    Power and Power-up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack (3 cell) 8 hours or more 2 hours Battery pack (6 cell) 8 hours or more 3 hours Battery pack (9 cell)

  • Page 158: Monitoring Battery Capacity

    Power and Power-up Modes Monitoring battery capacity Remaining battery power can be monitored in Power Options. Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the current power consumption rate and remaining battery capacity.

  • Page 159: Retaining Data With Power Off

    Power and Power-up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention Time Battery type State and Retention Time Battery pack (3 cell) about 18 hours (sleep mode) about 7 days (shutdown mode) Battery pack (6 cell)

  • Page 160: Replacing The Battery Pack

    Power and Power-up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source.

  • Page 161: Installing The Battery Pack

    7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. Installing the battery pack To install a battery pack, follow the steps below.

  • Page 162: Starting The Computer By Password

    Power and Power-up Modes Starting the computer by password If you have already registered a password, there are two ways to start the computer: ■ Swipe your fingerprint on the sensor if you have already registered the fingerprint with the Fingerprint utility and enabled Fingerprint Power-on Security.

  • Page 163: Panel Power On/Off

    Power and Power-up Modes Panel power on/off You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in sleep or hibernation mode but not in boot mode. If the panel power off function is enabled and use Shut down Windows, do not close the display until the shut down function is completed.

  • Page 164: Chapter 7 Hw Setup And Passwords

    TOSHIBA HW Setup allows you to configure settings for General, Password, Display, CPU, Boot Priority, Keyboard, USB, LAN and LED. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.

  • Page 165: User Password

    HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version and date. Password User Password This option allows you to set or reset the user password for power on.
  • Page 166 HW Setup and Passwords To delete a user password: 1. Select Not Registered to display the following prompt: Enter Password: 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks. Enter Password: **** 3.

  • Page 167: Boot Priority

    HW Setup and Passwords Dynamic CPU Frequency Mode This option allows you to choose from the following settings: Dynamically CPU power consumption and clock speed Switchable automatic switching function is enabled. When the computer is in use, CPU operation is automatically switched when necessary.
  • Page 168 HW Setup and Passwords If there are 2 HDDs, the Boot Priority Options setting will be like the following. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB diskette drive.
  • Page 169 HW Setup and Passwords Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in sleep mode. Enabled Enables the Wake-up on Keyboard.
  • Page 170 HW Setup and Passwords Wake-up on LAN This feature lets the computer’s power be turned on when it receives a wake-up signal from the LAN. Enabled Enables the Wake-up on LAN. (Default) Disabled Disables the Wake-up on LAN. Do not install or remove an optional memory module while Wake-up on LAN is enabled.

  • Page 171: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/Memory ■ ExpressCard ■ SD, SDHC, MS, MS Pro, MMC, xD memory cards ■ Memory expansion Power devices ■...

  • Page 172: Expresscard

    Optional Devices ExpressCard Installing an ExpressCard The ExpressCard slot is located on the left side of the computer. You can install one ExpressCard in the slot. Windows’ hot-install feature allows you to install ExpressCard while the computer’s power is on. Do not install an ExpressCard while the computer is in sleep or hibernation mode.
  • Page 173 Optional Devices 2. Grasp the dummy card and pull it out from the slot. UMMY CARD Figure 8-2 Removing the dummy card 3. Insert the ExpressCard. 4. Press gently to ensure a firm connection. 5. Check the configuration in the HW Setup window to make sure it is appropriate for your card.

  • Page 174: Removing An Expresscard

    Optional Devices Removing an ExpressCard To remove the ExpressCard, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the ExpressCard. 2. Press the ExpressCard slightly to make it stretch out. 3.

  • Page 175: Multiple Digital Media Card Slot

    Optional Devices Multiple digital media card slot The computer is equipped with a multiple digital media card slot that can accommodate Secure Digital (SD)/ Secure Digital High Capacity (SDHC)/ Memory Stick (MS)/Memory Stick Pro (MS Pro)/Multi Media Card (MMC)/xD memory cards. These memory cards allow you to easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD/SDHC/MS/MS Pro/MMC/xD memory cards.

  • Page 176: Installing A Sd/Sdhc/Ms/Ms Pro/Mmc/Xd Card

    Optional Devices Installing a SD/SDHC/MS/MS Pro/MMC/xD card To install the memory card, follow the steps below. 1. Insert the memory card. 2. Press gently to ensure a firm connection. SD/SDHC/MS/MS /MMC/ CARD ULTIPLE IGITAL EDIA ’ HE CARD S SHAPE DEPENDS ON THE CARD YOU PURCHASED Figure 8-5 Inserting the memory card ■...

  • Page 177: Removing A Sd/Sdhc/Ms/Ms Pro/Mmc/Xd Card

    Optional Devices Removing a SD/SDHC/MS/MS Pro/MMC/xD card To remove the memory card, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the inserted memory card. 2. Gently press the memory card inside the socket to eject it. 3.

  • Page 178: Installing Memory Module

    Optional Devices Installing memory module To install a memory module, make sure the computer is in boot mode then: 1. Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3. ■ If you use the computer for a long time, the memory modules will become hot.
  • Page 179 Optional Devices 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches. Do not touch the connectors on the memory module or on the computer.

  • Page 180: Removing Memory Module

    Optional Devices Removing memory module To remove the memory module, make sure the computer is in boot mode then: 1. Turn the computer off and remove all cables connected to the com- puter. ■ If you use the computer for a long time, the memory modules will become hot.

  • Page 181: Additional Battery Pack (3 Cell, 6 Cell And 9 Cell)

    Optional Devices Additional battery pack (3 cell, 6 cell and 9 cell) You can increase the portability of the computer with additional battery packs (3 cell: PA3533U-1BRS/PA3533U-1BAS, 6 cell: PA3534U- 1BRS/PA3534U-1BAS, 9 cell: PA3535U-1BRS/PA3535U-1BAS). If you’re away from an AC power source, you can replace a low battery with a fully charged one.

  • Page 182: Television

    Optional Devices To change the display settings, press FN + F5. If you disconnect the monitor before you turn the computer off, be sure to press FN + F5 to switch to the internal display. Refer to Chapter 5, Keyboard, for details on using hot keys to change the display setting.

  • Page 183: Setting For Display Video On Hdmi

    Optional Devices 1. Plug one end of the HDMI cable into the HDMI port of the HDMI device. Figure 8-12 Connecting a HDMI cable 2. Plug the other end of the HDMI cable into the HDMI out port on your computer.

  • Page 184: I.link (Ieee1394)

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. ■ Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.

  • Page 185: Connecting

    Optional Devices Connecting 1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394) cable into the computer. 2. Plug the other end of the cable into the device. Note the following when you use i.LINK: ■ You may need to install drivers for your i.LINK devices. ■...

  • Page 186: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 187: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 188: Hardware And System Checklist

    Troubleshooting The problems may be caused by your software or Software diskette. If you cannot load a software package, the media (usually a diskette) may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.

  • Page 189: Self Test

    When the computer starts up, the self-test will be run automatically, and the following will be displayed: TOSHIBA Leading Innovation>>> This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system.

  • Page 190: Ac Power

    Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Power and Power-up Modes for more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power (DC IN indicator does...

  • Page 191: Password

    Troubleshooting Problem Procedure Check the Battery indicator. If it does not glow, let the computer charge the battery for at least 20 minutes. If the Battery indicator glows after 20 minutes, let the battery continue to charge at least another 20 minutes before turning on the computer.

  • Page 192: Lcd Panel

    Troubleshooting LCD panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, HW Setup and Passwords, for more information. Problem Procedure No display Press hot keys FN + F5 to change the display priority, to make sure it is not set for an external monitor.

  • Page 193: Dvd Super Multi(+-R Dl) Drive

    If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 194: Hd Dvd-Rom Drive/Hd Dvd-Rw Drive

    If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 195: Diskette Drive

    Troubleshooting Diskette drive Problem Procedure Drive does not operate There may be a faulty cable connection. Check the connection to the computer and to the drive. Some programs run The software or hardware configuration may be correctly but others do causing a problem.

  • Page 196: Usb Mouse

    Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. Click Start → Control Panel → slow Hardware and Sound → Mouse to access it. When the reaction of Adjust the touch Sensitivity.

  • Page 197: Fingerprint Sensor

    If problems persist, contact your dealer. Fingerprint Pre-OS Please use TOSHIBA HW Setup to register the feature or Single Sign User Password if it was not registered. On feature cannot be...

  • Page 198: Expresscard

    Troubleshooting ExpressCard Refer also to Chapter 8, Optional Devices. Problem Procedure ExpressCard error Reseat the ExpressCard to make sure it is firmly occurs connected. Make sure the connection between the external device and the card is firm. Check the card’s documentation. If problems persist, contact your dealer.

  • Page 199: Sound System

    Troubleshooting Problem Procedure Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure.

  • Page 200: Usb

    Troubleshooting Refer also to your USB device’s documentation. Problem Procedure USB device does not Check for a firm cable connection between the work USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed.
  • Page 201 Troubleshooting Problem Procedure The battery depletes When USB Sleep and Charge function is set to quickly even when I [Enabled] in the HW Setup, USB bus power turned OFF the power of (DC5V) will be supplied to the external device the computer connected to the compatible port.

  • Page 202: Modem

    Troubleshooting Modem Problem Procedure Communication Make sure the computer’s internal modem software can’t initialize settings are correct. Refer to Phone and Modem modem Options in the Control Panel. You can hear a dial tone If the call is going through a PBX machine, make but can’t make a call sure the communication application’s tone dial detection feature is disabled.

  • Page 203: Sleep/Hibernation

    Troubleshooting Sleep/Hibernation Problem Procedure The system will not Is Windows Media Player open? The system enter sleep/hibernation might not enter sleep/hibernation, if Windows Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select sleep/hibernation. If problems persist, contact your dealer.

  • Page 204: Bluetooth

    Troubleshooting Bluetooth For more information on wireless communication, refer to Chapter 4, Operating Basics Problem Procedure Make sure the computer’s wireless Cannot access communication switch is set to on. Bluetooth device Make sure the Bluetooth Manager is running and the power to the Bluetooth device is turned on. Make sure no optional Bluetooth Adpater is installed in the computer.

  • Page 205: Recovery Discs

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.

  • Page 206: Where To Write

    Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed on the below. Outside of Europe Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd.

  • Page 207: Disclaimers

    5°C to 30°C (41°F to 86°F) or > 25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model-please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details).

  • Page 208: Memory (Main System)

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in chapter 9, Troubleshooting for more information.

  • Page 209: Battery Life

    This is a normal phenomenon for all batteries. To purchase a new battery pack, see the accessories information that is shipped with your computer, or visit the Toshiba web site at www.pcsupport.toshiba.com. HDD drive capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10.

  • Page 210: Copy Protection

    Disclaimers Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.
  • Page 211 Appendixes Table of Contents Specifications................A-1 Appendix A Display Controller and Modes............ B-1 Appendix B V.90/V.92..................C-1 Appendix C Wireless LAN................. D-1 Appendix D AC Power Cord and Connectors..........E-1 Appendix E Downloaded from LpManual.com Manuals User’s Manual Appendixes-1...

  • Page 212: Environmental Requirements

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental requirements Operating Non-operating Ambient temperature 5°C to 35°C -20°C to 60°C Relative humidity 20% to 80% 10% to 90% Altitude (from sea level) 0 to 3,000 meters 0 to 10,000 meters Power requirements AC adaptor 100-240 volts AC...
  • Page 213 Specifications Built-in modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications...

  • Page 214: Display Controller

    Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware com- mands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors.

  • Page 215: Video Modes

    Display Controller and Modes Video modes The computer supports video modes defined in the table below. If your application offers a selection of mode numbers that do not match the num- bers on the table, select a mode based on, resolution, number of colors and refresh rates.
  • Page 216 Appendix C V.90/V.92 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90/V.92. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
  • Page 217 V.90/V.92 Table Result codes for a V.90 connection Result code Description CONNECT 32000 EC* Connection at 32000 bits/s CONNECT 36000 EC* Connection at 36000 bits/s CONNECT 40000 EC* Connection at 40000 bits/s CONNECT 44000 EC* Connection at 44000 bits/s CONNECT 48000 EC* Connection at 48000 bits/s CONNECT 52000 EC* Connection at 52000 bits/s...
  • Page 218 V.90/V.92 V42bis V.42 error control and V.42bis data compression V.42 error control only NoEC No error control protocol AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection - maximum modem speed(default)

  • Page 219: Card Specifications

    Appendix D Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications ■ Mini Card Form Factor ■ IEEE 802.11 Standard for Wireless LANs Compatibility ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.

  • Page 220: Radio Characteristics

    Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for infor- mation about the radio regulations that apply in your country/region.
  • Page 221 Wireless LAN Table Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.5 MHz 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 When installing Wireless LAN cards, the channel configuration is managed as follows: ■...
  • Page 222 Wireless LAN Table Wireless IEEE 802.11 Channels Sets (Revision A) Frequency Range Channel ID 5150-5850 MHz Note 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 US only 5765 US only 5785 US only...

  • Page 223: Ac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various interna- tional AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm Current rating:...

  • Page 224: United Kingdom

    AC Power Cord and Connectors In Europe, two conductors power cords must be VDE type, H05VVH2-F or H03VVH2-F; while three conductors be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be 2-15P (250V) or 1-15P (125V); while three pin be 6-15P (250V) or 5-15P (125V) as designated in the U.S.
  • Page 225 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
  • Page 226 Glossary I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock...
  • Page 227 Glossary ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 228 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 229 Glossary Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
  • Page 230 Glossary Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk.
  • Page 231 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that allows you to assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 232 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that allows you to set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 233 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys.
  • Page 234 Glossary monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usually contains integrated circuits that perform the processor’s basic functions and provides connectors for adding other boards that perform special functions.
  • Page 235 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that allows you to set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 236 Glossary ROM: Read Only Memory: A nonvolatile memory chip manufactured to contain information that controls the computer’s basic operation. You cannot access or change information stored in ROM. S-Video: Short for Super-Video, a type of connection used by S-VHS videocassette players, camcorders, DVD players, etc. to transmit high-quality video signals.

  • Page 237: Wireless Lan

    TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 238 Index AC adaptor, 1-9, 2-6, 2-30, A-1 Checklist additional, 1-18, 8-11 equipment, 1-1 connecting, 3-2 problems, 9-2, 9-3 problems, 9-5 Cleaning the computer, 4-50 safety instructions, -iii, -xxxi COM port, 4-44 ASCII characters, 5-8 DC IN, 2-6 Battery connecting, 3-2 charging, 6-7 indicator, 2-11, 6-3 life, 10-3...
  • Page 239 Headphone, 1-9 jack location, 2-5 port, 2-1 problems, 9-20 problems, 9-14 using, 4-45 Hibernation mode, 1-13 FN + 1 (TOSHIBA zooming utility problems, 9-18 reduce), 5-5 setting, 3-4 FN + 2 (TOSHIBA zooming utility Hot keys, 1-12 enlarge), 5-5 brightness down, 5-4...
  • Page 240 Index HW Setup accessing, 7-1 FN sticky key, 5-5 Boot Priority, 7-4 function keys, 5-2 CPU, 7-4 hot keys, 5-3 display, 7-3 HW Setup, 7-6 general, 7-2 indicator, 2-12 keyboard, 7-6 problems, 9-6 LAN, 7-7 typewriter keys, 5-1 LED, 7-7 Windows special keys, 5-6 password, 7-2 Keypad overlay, 1-12, 5-6...
  • Page 241 Index Modem, 1-11, 4-42, A-2, C-1 Power, 1-9 connecting, 4-44 button, 2-9 disconnecting, 4-45 button location, 2-8 jack location, 2-5 conditions, 6-1 problems, 9-17 hibernation mode, 3-4 properties menu, 4-43 indicator, 2-11, 6-3 region selection, 4-43 power-up modes, 6-13 Moving the computer, 4-50 problems, 9-4 Multiple digital media card settings, 1-12, 5-4...
  • Page 242 TOSHIBA Assist, 1-15 sound system, 9-14 TOSHIBA Bluetooth Stack, 1-16 system start-up, 9-3 TOSHIBA ConfigFree, 1-16 TOSHIBA support, 9-20 TOSHIBA Disc Creator, 1-15, 4-35 touchpad, 9-10 TOSHIBA DVD-RAM utility, 1-15 TV output signal, 9-14 TOSHIBA Face Recognition, 1-16 USB, 9-15...

  • Page 243: Wireless Lan

    Index Wireless LAN, 1-10, 10-4 indicator, 4-48 problems, 9-18 switch, 1-11, 2-1 using, 4-46 Downloaded from LpManual.com Manuals User’s Manual Index-6...

This manual is also suitable for:

Satellite a300d

Table of Contents