Canon BJC-55 Service Bulletin page 85
Hide thumbs
Also See for BJC-55:
- User manual (468 pages) ,
- Service manual (206 pages) ,
- Service bulletin (22 pages)
Table of Contents
Advertisement
BJC-50
d) Switching on the power
Make sure the lock switch is not locked and then press the POWER button to switch
on the power. When the printer is powered up, it carries out the initial operation,
then moves the carriage to the cartridge replacing position (center of the printer).
The POWER indicator blinks to show that the printer is on standby with a BJ
cartridge installed. Switch on the power for the equipment in this order: computer,
other peripheral equipment, printer.
e) Installing the BJ cartridge
Two types of cartridges can be installed in the printer: black BJ cartridge (BC-10)
and color BJ cartridge (BC-11e). The BJ cartridge BC-11 may be used however it
cannot print small dots.
1) Removing the cap from the print head of the BJ cartridge
Remove the BJ cartridge from the cartridge pack, then remove the orange head cap
and tape protecting the nozzles as shown in the figure below.
Color BJ Cartridge
Black BJ Cartridge
Cartridge Pack
Figure 3-6 Removing the Head Cap and the Tape
Do not reuse a head cap and tape that have been removed once. If they
are reused, the head may be clogged with foreign matter, or colors of ink
may be mixed.
Peel off the tape protecting the nozzles without touching the print head.
Poor printing may be caused by scratches on the printhead or any foreign
object adhered to it.
After removing the cap and the tape, do not shake the BJ cartridge. Ink
could splatter out if you do.
Orange Head Cap
Cartridge Pack
3-5
Part 3: Operating Instructions
Tape
Advertisement
Table of Contents
