Table of Contents
Advertisement
58 | Embedded NVR Bundle IP Cameras User Guide
Network Configuration
TCP/IP
www.honeywell.com/security
Figure 3-20
TCP/IP Interface
Table 3-10
TCI/IP Configuration
Parameter
Function
Host Name
Configure to set the current host camera's name. Maximum 32
characters.
Ethernet Card
Select an Ethernet port. The default is wire LAN.
Note
Mode
There are two modes: Static and DHCP.
The IP/submask/gateway are Null when you select DHCP mode to
automatically search for the IP.
If you select Static mode, then you need to manually set the
IP/submask/gateway.
If you select DHCP mode, then you can view the
IP/submask/gateway from the DHCP.
If you switch from DHCP mode to Static mode, then you need to
reset the IP parameters.
IP/submask/gateway and DHCP are read-only when the PPPoE
function is correctly working.
MAC Address
Displays the MAC address.
IP Version
Select the IP version, either IPV4 or IPV6. You can access the IP
address of both of these versions.
If you modify these settings, you will have to reboot your
camera to activate the new setup.
Hide quick links:
Advertisement
Table of Contents
