Advertisement
Quick Links
HBD2PR1(X) 1080p TDN IR Bullet IP Camera
Quick Installation Guide
800-17077V1
A
07/2014
Document
— Rev
—
Thank you for purchasing a HBD2PR1(X) 1080p True
Day/Night IR Bullet IP Camera to complement your
Honeywell Embedded NVR. Follow the instructions
in this guide to install and log in to your camera. For
instructions on configuring the camera, refer to the
Performance Series IP Cameras User Guide
software and documentation CD that came with your
camera. If you require additional assistance, please
call the number shown below.
Cautions and Warnings
WARNING
To ensure compliance with electrical safety standards this product is
intended for use with a Listed Power Adapter marked with "Limited Power Source", "LPS",
on the unit, output rated 12 V DC, minimum 0.33A, Tma=60Deg.C or from Power over
Ethernet (PoE) provided by Listed Information Technology Equipment meeting the IEEE
802.3af PoE standard.
The Ethernet connection is not intended to be connected to exposed (outside plant)
networks. Do not connect two power sources to the camera at the same time.
Caution
Invisible LED radiation (850 nm). Avoid exposure to beam.
Document 800-17077V1 – Rev A – 07/2014
on the
Regulatory Statements
Information to the User: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Note
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Important Safeguards
•
Read and keep these instructions.
•
Do not aim the camera toward an bright light source for extended periods to prevent damage to
the imager. Avoid operating the unit under or close to unstable light sources (may cause
flickering), or close to fluorescent lamps or objects reflecting light.
•
Do not touch the camera lens.
•
Do not drop the camera or subject it to physical shock.
•
Do not use a strong or abrasive detergent when cleaning the camera.
•
Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments, where the
operating temperature is outside the recommended range of -4°F to 140°F (–20°C to 60°C).
Note
Do not apply power to the camera before completing installation.
Note
Confirm the installation surface can. at the minimum, support three times the weight of the camera
plus the bracket.
1
Advertisement
Related Manuals for Honeywell HBD2PR1
Summary of Contents for Honeywell HBD2PR1
- Page 1 — installation.If this equipment does cause harmful interference to radio or television reception, Thank you for purchasing a HBD2PR1(X) 1080p True which can be determined by turning the equipment off and on, the user is encouraged to try to Day/Night IR Bullet IP Camera to complement your correct the interference by one or more of the following measures: Honeywell Embedded NVR.
- Page 2 Document 800-17077V1 – Rev A – 07/2014 © 2014 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However,...