Table of Contents
Advertisement
Connecting to Your Computer
®
Use Microsoft
ActiveSync
transfer files between a host computer and CF-P1, or to backup and restore data.
CAUTION
To ensure that synchronization functions properly, install Microsoft
before connecting CF-P1 and the host computer for the first time.
The following methods can be used to connect the CF-P1 with a host computer.
The use of a Serial Cable or USB Cable.
The use of the infrared communication port.
Use an RS-232C Cable or a USB Adaptor Cable to connect CF-P1 with a peripheral.
Installing ActiveSync
1
Set the Companion CD into the host computer.
The opening screen is displayed automatically.
•When the opening screen is not automatically displayed
In [Start] - [Run], input [x:\setup] and select [OK].
("x" is the drive letter. You can change the letter to suit your preference.)
2
Select
button.
3
Select [Start Here].
4
Select [Install ActiveSync 3.5] and read the on-screen instructions and
select [Install].
5
At [Installation Message], select [OK].
[File Download] will be displayed. This screen varies depending on the host
computer's software (e.g. Internet Explorer version).
• If [Open] is displayed on [File Download], select [Open].
• If [Run this program from its current location] is displayed on [File Download], select
it and then select [OK].
6
At [Microsoft ActiveSync], select [Next].
7
At [Select Installation Folder], select [Next].
8
At [Get Connected], read the on-screen instructions and connect the
CF-P1 with a host computer.
(Refer to page 33 to connect the CF-P1 with a host computer.)
For details, select [Microsoft ActiveSync 3.5 Help] during the installation.
®
3.5 to synchronize a host computer and CF-P1 information, to
®
3.5
®
®
ActiveSync
3.5
31
Advertisement
Table of Contents
