hit counter script
Sony HCD-FX900W Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-FX900W
  6. Service manual

Sony HCD-FX900W Service Manual

Sony super audio cd/dvd receiver service manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL

Ver. 1.1 2006.09
HCD-FX900W is the amplifier, DVD/CD
and tuner section in DAV-FX900W.
This system incorporates with Dolby* Digital and Dolby Pro
Logic (II) adaptive matrix surround decoder and the DTS**
Digital Surround System.
* Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are trademarks
of Dolby Laboratories.
** Manufactured under license from Digital Theater Systems, Inc.
"DTS" and "DTS Digital Surround" are trademarks of Digital
Theater Systems, Inc.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION
(FTC Output Power):
FL/FR/SL/SR: 84 W/ch
3 ohms at 160 - 20,000 Hz,
0.7 % THD
SW: 162 W 1.5 ohms at 25
- 160 Hz, 0.7 % THD
C: 84W 3 ohms at 500 -
20,000 Hz, 0.7% THD
Amplifier section
Surround mode (reference) RMS output power, 10 %
THD
Front: 143 W + 143 W
(with SS-TS55)
Center*: 143 W
(with SS-CT52)
Surround*: 143 W + 143
W** (3 ohms)
Subwoofer*: 285 W
(with SS-WS53)
* Depending on the sound field settings and the source,
there may be no sound output.
** When connecting the surround speakers to the system
by the speaker cords.
Sony Corporation
9-887-193-02
Home Audio Division
2006I16-1
Published by Sony Techno Create Corporation
© 2006.09
HCD-FX900W
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
Inputs (Analog)
TV/VCR 1, TV/VCR 2 (AUDIO IN)
Sensitivity: 450/250 mV
AUDIO IN
Sensitivity: 250/125 mV
Inputs (Digital)
TV/VCR1 (COAXIAL IN)/TV/VCR2 (OPTICAL IN)
impedance: 75 ohms/–
Outputs (Analog)
Phones
Accepts low-and high-
impedance headphones.
Super Audio CD/DVD system
Laser
Semiconductor laser
(Super Audio CD/DVD:
λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
Signal format system
NTSC
Tuner section
System
PLL quartz-locked digital
synthesizer system
FM tuner section
Tuning range
87.5 – 108.0 MHz
(100 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
SUPER AUDIO CD/DVD RECEIVER
US Model
Canadian Model
HCD-FX10
CDM69EH-DVBU101
KHM-310CAB/C2NP
AM tuner section
Tuning range
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,710 kHz (with the
interval set at 9 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Outputs
VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
B
B
R
75 ohms
HDMI OUT: Type A (19
pin)
Inputs
TV/VCR1: 1 Vp-p
75 ohms
TV/VCR2: 1 Vp-p
75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
B
B
R
75 ohms
— Continued on next page —
/C
: 0.7 Vp-p
R
/C
: 0.7 Vp-p
R

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-FX900W

Summary of Contents for Sony HCD-FX900W

  • Page 1: Service Manual

    HCD-FX900W SERVICE MANUAL US Model Canadian Model Ver. 1.1 2006.09 HCD-FX900W is the amplifier, DVD/CD and tuner section in DAV-FX900W. This system incorporates with Dolby* Digital and Dolby Pro Model Name Using Similar Mechanism HCD-FX10 Logic (II) adaptive matrix surround decoder and the DTS**...

  • Page 2: Leakage Test

    FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS • Usable with ordinary solder QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT It is best to use only unleaded solder but unleaded solder may DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS also be added to ordinary solder.

  • Page 3: Table Of Contents

    HCD-FX900W TABLE OF CONTENTS SERVICING NOTE 7-9. Printed Wiring Board – DMB12 Section (Side A) – ..46 ........... 4 7-10. Printed Wiring Board – DMB12 Section (Side B) – ..47 7-11. Schematic Diagram – DMB12 Section (1/7) – ....48 GENERAL ..............

  • Page 4: Servicing Note

    [VER.X.XX] (X is a number) may appear on the screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.
  • Page 5 HCD-FX900W Discharge the charged electricity in capacitors to prevent electric shock as follows When disassembling the machine, be sure to discharge the charged electricity in the following capacitors. Use a resistor of 800 ohms, 2 Watts for discharging the following capacitors.
  • Page 6 HCD-FX900W Fix the capacitors with adhesive agent as follows Fixing the capacitors with adhesive agent is required by the safety regulation. Be sure to fix the capacitors with adhesive agent when part or circuit board is replaced. POWER BOARD PRECAUTION WHEN INSTALLING A NEW OP UNIT /...
  • Page 7 HCD-FX900W Precaution when replacing the BUTTON Please apply the adhesive agent to the BUTTON BASE (PLAY) when replacing the BUTTON (PLAY) or BUTTON (POWER) or BUTTON (STOP). Please apply the adhesive agent to the BUTTON BASE (POWER) when replacing the BUTTON (DISC) or BUTTON (POWER) or BUTTON (STOP).
  • Page 8 HCD-FX900W • MAIN board service position (side A) DMB12 board, HDMI bracket MAIN board (side A) insulating sheet DMB12 board, HDMI bracket MAIN board (side A)
  • Page 9 HCD-FX900W • MAIN board service position (side B) front panel section CN109 Mechanism deck DMB12 BOARD (from the FL board) Extension cable : J-2501-242-A CN4501 (1mm / 11pin / L300) CN4301 Extension cable : Extension cable : J-2501-245-A J-2501-248-A (1mm / 23pin / L300)
  • Page 10 HCD-FX900W • DMB12 board service position DMB12 board insulating sheet DMB12 board...
  • Page 11 HCD-FX900W • POWER board service position POWER board insulating sheet POWER board...

  • Page 12: General

    HCD-FX900W SECTION 2 This section is extracted from instruction manual. GENERAL Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel A Disc slot (33) F PHONES jack (33) B Front panel display (100) G AUDIO IN/A.CAL MIC jack (21, 35)
  • Page 13 HCD-FX900W Front panel display About the indications in the front panel display A Lights up when the sleep timer is set. J Lights up when the music or movie (70) mode is selected. (36) B Current surround format (Except for...

  • Page 14: Remote Control

    After pressing the TV button w;, you can control the menu on a Sony TV. On the menu screen, DISPLAY button ea doubles as the MENU button, and the AMP MENU button 7 double as the TOOLS button.

  • Page 15: Disassembly

    HCD-FX900W SECTION 3 DISASSEMBLY 3-1. DISASSEMBLY FLOW • This set can be disassembled in the order shown below. • The dotted square with arrow ( ) prompts you to move to the next job when all of the works within the dotted square ( ) are completed.

  • Page 16: Top Panel, Side Panel

    HCD-FX900W Note: Follow the disassembly procedure in the numerical order given. 3-2. TOP PANEL, SIDE PANEL 7 three tapping screws (+BV 3 × 8) qs top (T3.5) panel 6 top panel (rear) 5 four tapping screws (+BV 3 × 8) 1 two tapping screws (+BV 3 ×...

  • Page 17: Jack Board, Front Panel Section

    HCD-FX900W 3-3. JACK BOARD, FRONT PANEL SECTION 1 three tapping screws (+BV 3 × 6) 2 five tapping screws (+BVTP 3 × 10) 3 lower panel 9 JACK board 7 two screws (+B 2.6 × 4) 6 connector (CN402) 8 jack panel...

  • Page 18: Key Board, Fl Board

    HCD-FX900W 3-4. KEY BOARD, FL BOARD 1 fourteen screws (+BTP 2 × 6) 3 FL board, KEY board, front chassis 2 four claws 9 FL board 8 two screws (+BV 3 × 6) 7 connector 4 connector (CN803) (CN804) 5 KEY board...

  • Page 19: Button (Disc/Play/Power)

    HCD-FX900W 3-5. BUTTON (DISC/PLAY/POWER) 3 button (power) 2 Remove the button base (play) 4 five buttons (disc) at the melted points. 5 two buttons (stop) 7 button (play) 1 Remove the button base (power) at the melted points. 8 four buttons (stop)

  • Page 20: Diat Tx Xm Board

    HCD-FX900W 3-7. DIAT TX XM BOARD 5 four screws (+BV 3 × 6) DIAT TX XM board connector (CN903) connector (CN101) wire (flat type) 13core(CN102) wire (flat type) 11core(CN1801) 3-8. DMB12 BOARD 2 connector (CN201) 3 wire (flat type) 4 connector...

  • Page 21: Main Board

    HCD-FX900W 3-9. MAIN BOARD 1 connector Route the harnesses as shown below. (CN506) 3 HDMI bracket 2 two screws (+BV 3 × 8) qs wire (flat type) qa wire (flat type) 13core (CN672) 11core (CN651) 0 wire (flat type) 11core (CN701)

  • Page 22: Sp Board

    HCD-FX900W 3-10. SP BOARD 2 two screws (+BV 3 × 8) HDMI bracket 1 connector (CN506) 4 connector (CN1303) 6 connector (CN1301) 7 two screws (+BV 3 × 6) 8 SP board 5 connector (CN1302) 3-11. POWER BOARD Route the harnesses as shown below.

  • Page 23: Dvd Mechanism Deck (Cdm69Eh-Dvbu101)

    HCD-FX900W 3-12. DVD MECHANISM DECK (CDM69EH-DVBU101) 1 two screws (+BV 3 × 6) 2 wire cover 5 two filament types (12 × 45) 4 two screws 3 two screws (+BV 3 × 6) (+BV 3 × 6) 6 cdm cover...

  • Page 24: Optical Pick-Up (Khm-310Cab)

    HCD-FX900W 3-14. OPTICAL PICK-UP (KHM-310CAB) 3 insulator screw optical pick-up (KHM-310CAB) 8 insulator 2 insulator screw 4 insulator screw 7 insulator 9 insulator 1 insulator screw 6 insulator 3-15. SW BOARD, BRACKET (TOP) ASSY 4 SW (3) board 5 SW (4) board...

  • Page 25: Relay Board

    HCD-FX900W 3-16. RELAY BOARD 4 connector (CN710) – bottom view – 5 connector (CN703) RELAY board 2 four screws (+BVTP2.6) 6 RELAY board 1 Remove five solders. 3-17. MOTOR (STOCKER) ASSY (STOCKER)(M761) 3 two screws (+BVTP2.6) 2 Remove two solders.

  • Page 26: Motor (Roller) Assy (Roller)(M781)

    HCD-FX900W 3-18. MOTOR (ROLLER) ASSY (ROLLER)(M781) 3 two screws (+BVTP2.6) 2 Remove two solders. 4 ROLLER MOTOR board 5 motor (roller) assy (roller)(M781) 1 belt (roller V) 3-19. MOTOR (MODE) ASSY (MODE)(M771) 3 two screws (+BVTP2.6) 1 Remove five solders of rotary encoder.

  • Page 27: Rubber Roller (Slider) Assy

    HCD-FX900W 3-20. RUBBER ROLLER (SLIDER) ASSY 5 step screw 8 step screw 1 step screw 9 tension 7 rubber roller spring 0 rubber roller (slider 1) assy (slider 2) (slider 4) assy 2 rubber roller 6 tension spring (slider S) assy...

  • Page 28: Cam (Gear)

    HCD-FX900W 3-22. CAM (GEAR) qf cam (gear) : Note 6 gear (mode 5) qd screw 5 screw (+PTPWH2.6 × 8) 4 gear (mode 5) qs gear(mode cam) 3 screw (+PTPWH2.6 × 8) qa screw (+PTPWH2.6 × 8) 2 pulley (mode deceleration)

  • Page 29: Assembly

    HCD-FX900W SECTION 4 ASSEMBLY • This set can be assembled in the order shown below. 4-1. HOW TO INSTALL THE CAM (EJECT LOCK) 1 Rotate the cam (BU U/D) fully in the direction of arrow. 2 Engage the gear (eject lock) and the gear of the cam (eject lock) aligning the mark with the center of the gear (eject lock).

  • Page 30: How To Install The Gear (Mode C)

    HCD-FX900W 4-3. HOW TO INSTALL THE GEAR (MODE C) 1 Align the mark on the rotary encoder (S771) with the projection of the assy. 2 Check that the cam (BU U/D) can not be rotated in the direction of arrow.

  • Page 31: How To Install The Rotary Encorder (S702)

    HCD-FX900W 4-5. HOW TO INSTALL THE ROTARY ENCORDER (S702), GEAR (STOCKER COMMUNICATION) 4 gear 5 screw (+PTPWH2.6 × 8) (stocker communication) 3 screw 7 two screws (+PWH2 × 6) (+PTPWH2.6 × 8) 1 rotary encoder Engage the rotary encoder (S702)

  • Page 32: Test Mode

    HCD-FX900W Ver. 1.1 SECTION 5 TEST MODE 3. Disc Tray Lock Note 1: Regarding the notification symbol “R” The disc tray lock function for the antitheft of an demonstration Because the number of the operating buttons of this product disc in the store is equipped.
  • Page 33 HCD-FX900W Ver. 1.1 (2) Select “2. Drive Manual Operation” by pressing the 2 “R” DVD SECTION button on the remote commander. The screen will appear as shown. 8-1. GENERAL DESCRIPTION The IOP measurement allows you to make diagnosis and adjustment Drive Manual Operation simply by using the remote commander and monitor TV.
  • Page 34 HCD-FX900W Ver. 1.1 8-4. EMERGENCY HISTORY The meaning of error code is as below: To check the emergency history, please follow the following 01: Communication error (No reply from syscon) procedure. 02: Syscon hung up 03: Power OFF request when syscon hung up (1) From the Top Menu of Remocon Diagnosis Menu, select “3.
  • Page 35 HCD-FX900W Ver. 1.1 8-4-4. Return to the Top Menu of Remocon Diagnosis Menu Press 0 “R” button on the remote commander. • Check Version Information To check the version information, please follow the following procedure. (1) From the Top Menu of Remocon Diagnosis Menu, select “4.

  • Page 36: Electrical Adjustment

    HCD-FX900W Ver. 1.1 SECTION 6 ELECTRICAL ADJUSTMENT Checking Location: DMB12 board (Side A) DVD SECTION DMB12 BOARD (SIDE A) When the base unit is replaced, perform the adjustment and the measurement as shown below in this order. EXECUTING IOP MEASUREMENT (See page 33)

  • Page 37: Diagrams

    HCD-FX900W SECTION 7 DIAGRAMS • Circuit Boards Location THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards. Note: Note: •...

  • Page 38: Block Diagram - Rf Section

    HCD-FX900W 7-1. BLOCK DIAGRAM – RF SECTION – IC652 CN105 STREAM PROCESSOR LRCKO XRST RFMON LRCKI DVDRFIP V2REFO V2REFO BCKO LRCKO TO DIAG JIG BCKI LRCKO DIAT SECTION BCKO SDIN BCKO (Page 43) MCKO RCKI SDOUT DVDA IC4501 BUFFER LRCK0...

  • Page 39: Block Diagram - Video Section

    HCD-FX900W 7-2. BLOCK DIAGRAM – VIDEO SECTION – J203(1/2) TV/VCR1 VIDEO IN VIDEO IN TV/VCR2 IC201 VIDEO AMP, 75Ω DRIVER J202(1/2) J201 YOUT TV/VCR1 • Signal Path COMPONENT COUT VIDEO IN S VIDEO(DVD ONLY) IC202 : VIDEO VIDEO INPUT SELECTOR...

  • Page 40: Block Diagram - Amp Section

    HCD-FX900W Ver. 1.1 7-3. BLOCK DIAGRAM – AMP SECTION – IC3001 COMPARATOR J402 – PHONES • Signal Path : AUDIO – PLUG DET2 Q450,451 HPMUTE Q3081 Q460,461 MUTE SW IC3500 MUTE S-MASTER DIGITAL AMP NSPMUTE PWMB OUTA +3.3v PWMA OUTB...

  • Page 41: Block Diagram - Audio Section

    HCD-FX900W 7-4. BLOCK DIAGRAM – AUDIO SECTION – LRCKO BCKO IC350 AUDIO INPUT SELECTOR RF SECTION (Page 38) IC671 IC360 11 X3 J401 SELECTOR AUDIO IN/ IC401 MCKO 15 X2 A.CAL MIC 12 4A DIGITAL AUDIO PROCESSOR L-CH 14 X1 –...

  • Page 42: Block Diagram - Power Section

    HCD-FX900W 7-5. BLOCK DIAGRAM – POWER SECTION – POWER Thermistor F901 T901 D901 TRANSFORMER(MAIN) AC IN T801 DC/DC LINE CONVERTER FILTER D931 IC901 D905 +31.5V Q901 TO FLUORESCENT POWER VOLTAGE INDICATOR TUBE PROTECTION CONTROLLER IC931 D801,802 VOLTAGE D804,805 RECT DETECT...

  • Page 43: Block Diagram - Diat Section

    HCD-FX900W 7-6. BLOCK DIAGRAM – DIAT SECTION – IC1804 RF MODULATOR IC1802 D/A CONVERTER LEVEL SHIFT 49 LRCK LRCKO 50 BCK BCKO SECTION 48 DTIN D2(SL/SR) (Page 38) 41 APS XRST RV1801 64 XRST IC1805 Q1801 DAAOUT DIAT SIGNAL RF AMP...

  • Page 44: Printed Wiring Boards - Changer Section

    HCD-FX900W 7-7. PRINTED WIRING BOARDS – CHANGER SECTION – • See page 37 for Circuit Boards Location. :Uses unleaded solder. SW(1) BOARD S711 S771 S771 RELAY BOARD MAIN BOARD SUFFIX-15 CN621 SUPPLEMENT-1 M771 (Page 55) Page 3 S711 CN701 SW(2) BOARD...

  • Page 45: Schematic Diagram - Changer Section

    HCD-FX900W 7-8. SCHEMATIC DIAGRAM – CHANGER SECTION – • See page 79 for IC Block Diagrams. RELAY BOARD CN751 CN702 R731 DIODE DIODE I C 7 5 1 D SENSE D SENSE R733 CN701 R734 IC751 D+3.3V RPR-220 3 . 2...

  • Page 46: Printed Wiring Board - Dmb12 Section (Side A)

    HCD-FX900W 7-9. PRINTED WIRING BOARD – DMB12 SECTION (SIDE A) – • See page 37 for Circuit Boards Location. :Uses unleaded solder. ✩ IC103 (EEP ROM) can not be replaced individually. Replace it with DMB12 board assembly for service. for CHECK •...

  • Page 47: Printed Wiring Board - Dmb12 Section (Side B)

    HCD-FX900W 7-10. PRINTED WIRING BOARD – DMB12 SECTION (SIDE B) – • See page 37 for Circuit Boards Location. :Uses unleaded solder. ✩ IC706 (EEP ROM) can not be replaced individually. Replace it with DMB12 board assembly for service. • Semiconductor Location Ref.

  • Page 48: Schematic Diagram - Dmb12 Section (1/7)

    HCD-FX900W 7-11. SCHEMATIC DIAGRAM – DMB12 SECTION (1/7) – CN4301 R4701 JL4703 CN601 JL4704 FL601 FB604 FB602 JL4705 JL611 JL612 JL613 JL614 FL603 R4702 JL4706 C602 FB603 FB606 JL609 JL610 JL4707 JL601 JL602 C603 JL4708 R4703 JL4709 JL603 JL604 SUFFIX-15...

  • Page 49: Schematic Diagram - Dmb12 Section (2/7)

    HCD-FX900W Ver. 1.1 7-12. SCHEMATIC DIAGRAM – DMB12 SECTION (2/7) – IC103 (EEP ROM) can not be replaced individually. Replace it with DMB12 board assembly for service. C193 0.22 C195 0.22 R102 C101 C192 0.01 0.01 CN101 JL139 JL140 JL141...

  • Page 50: Schematic Diagram - Dmb12 Section (3/7)

    HCD-FX900W • See page 77 for Waveforms. • See page 87 for IC Pin Function Description. 7-13. SCHEMATIC DIAGRAM – DMB12 SECTION (3/7) – R1120 R1121 R1122 R1186 R1169 R1123 R1124 FB112 R1125 R146 C161 C163 C130 R136 R1191 0.01 0.01...

  • Page 51: Schematic Diagram - Dmb12 Section (4/7)

    HCD-FX900W 7-14. SCHEMATIC DIAGRAM – DMB12 SECTION (4/7) – • See page 79 for IC Block Diagram. IC104 C197 EDS6416AHTA-75-E C181 RB108 C180 RB106 RB107 C191 C179 RB105 C190 FB108 R1150 3.3k R1151 3.3k R1152 3.3k CN105 JL107 JL108 JL109...

  • Page 52: Schematic Diagram - Dmb12 Section (5/7)

    HCD-FX900W 7-15. SCHEMATIC DIAGRAM – DMB12 SECTION (5/7) – R231 R234 R230 R223 R225 R232 100k 100k C209 0.033 C211 CL206 C212 0.033 0.01 C215 R221 0.01 C233 R226 0.0047 R220 C214 0.001 CL209 R212 R214 CL210 R208 C205 CL211...

  • Page 53: Schematic Diagram - Dmb12 Section (6/7)

    HCD-FX900W • See page 79 for IC Block Diagram. 7-16. SCHEMATIC DIAGRAM – DMB12 SECTION (6/7) – IC706 (EEP ROM) can not be replaced individually. Replace it with DMB12 board assembly for service. C717 R734 C718 0.01 0.01 R740 R736...

  • Page 54: Schematic Diagram - Dmb12 Section (7/7)

    HCD-FX900W • See page 77 for Waveform. 7-17. SCHEMATIC DIAGRAM – DMB12 SECTION (7/7) – R763 R762 R772 R783 R784 C732 0.01 CL742 Q702 2SK1399-T1B CL743 Q701 2SK1399-T1B CL744 CL745 CL755 R781 R785 R786 R782 IC708 MB95F108ASPFV- R766 GE1-H0601 4.7k...

  • Page 55: Printed Wiring Board - Main Section (Side A)

    HCD-FX900W 7-18. PRINTED WIRING BOARD – MAIN SECTION (SIDE A) – • See page 37 for Circuit Boards Location. :Uses unleaded solder. DMB12 BOARD CN109 for WRITE JIG (Page 46) • Semiconductor Location Ref. No. Location IC3050 CN503 CN504 FB505...

  • Page 56: Printed Wiring Board - Main Section (Side B)

    HCD-FX900W 7-19. PRINTED WIRING BOARD – MAIN SECTION (SIDE B) – • See page 37 for Circuit Boards Location. :Uses unleaded solder. POWER BOARD POWER BOARD JACK BOARD CN904 CN902 CN403 for SOFT JIG (Page 72) • Semiconductor (Page 72)

  • Page 57: Schematic Diagram - Main Section (1/8)

    HCD-FX900W • See page 80 for IC Block Diagrams. 7-20. SCHEMATIC DIAGRAM – MAIN SECTION (1/8) – R3060 R3059 EB3001 TERMINAL BOARD C3035 C3034 R3062 TP3031 R3063 R3031 R3064 TP3003 R3065 TP3004 R3066 ICT3063 R3067 R3032 R3068 R3069 TP3032 R3033...

  • Page 58: Schematic Diagram - Main Section (2/8)

    HCD-FX900W • See page 79 for IC Block Diagrams. 7-21. SCHEMATIC DIAGRAM – MAIN SECTION (2/8) – R3501 R3502 C3406 0.033 ICT3010 C3403 ICT3011 C3413 ICT3060 R3061 C3551 1 50V R3403 TP3410 C3412 ICT3061 R3404 R3551 100k ICT3050 R3407 L3402...

  • Page 59: Schematic Diagram - Main Section (3/8)

    HCD-FX900W • See page 77 for Waveform. • See page 80 for IC Block Diagram. 7-22. SCHEMATIC DIAGRAM – MAIN SECTION (3/8) – R3055 C3015 C3014 R3011 R3050 ICT3003 Q3081 R3012 ICT3004 RT1P141C TP3011 R3151 R3013 TP3012 R3091 C3013 C3083...

  • Page 60: Schematic Diagram - Main Section (4/8)

    HCD-FX900W • See page 79 for IC Block Diagrams. 7-23. SCHEMATIC DIAGRAM – MAIN SECTION (4/8) – C3206 0.033 ICT3027 C3203 Q3252 ICT3028 2SA1235TP-1EF C3213 Q3202 2SA1235TP-1EF R3203 TP3210 C3212 R3204 C3220 0.0022 ICT3082 R3207 C3215 C3272 C3219 0.0022 0.001...

  • Page 61: Schematic Diagram - Main Section (5/8)

    HCD-FX900W • See page 77 for Waveform. • See page 84 for IC Pin Function Description. 7-24. SCHEMATIC DIAGRAM – MAIN SECTION (5/8) – CN601 TP601 R554 TP602 TP603 TP604 C518 TP605 R604 R501 TP606 R605 ICT538 R503 TP607 R606...

  • Page 62: Schematic Diagram - Main Section (6/8)

    HCD-FX900W 7-25. SCHEMATIC DIAGRAM – MAIN SECTION (6/8) – CN621 IC622 BH2210FV-E2 TP621 RB626 RB630 TP622 TP623 TP624 TP625 TP626 TP627 TP646 TP628 TP645 TP629 TP644 TP630 TP643 TP631 RB629 TP632 R623 RB625 FB504 TP633 TP634 C625 ICT550 R634 C534...

  • Page 63: Schematic Diagram - Main Section (7/8)

    HCD-FX900W • See page 77 for Waveform. • See page 80, 81 for IC Block Diagrams. 7-26. SCHEMATIC DIAGRAM – MAIN SECTION (7/8) – IC652 SRC4182 R666 ICT521 IC651 EB701 SN74AHC1G08DCKR TERMINAL BOARD R659 EB703 GROUND TERMINAL BOARD GROUND R662...

  • Page 64: Schematic Diagram - Main Section (8/8)

    HCD-FX900W • See page 77 for Waveform. • See page 80 for IC Block Diagram. 7-27. SCHEMATIC DIAGRAM – MAIN SECTION (8/8) – SI-3010KM-TL 1/10W 0.5% TP10 1000 6.3V TP11 1/10W 0.5% C782 IC782 SN74LVC1G79DCKR R782 IC781 SN74LV08APWR TP49 C783 0.22...

  • Page 65: Printed Wiring Boards - Fl/Key Section

    HCD-FX900W 7-28. PRINTED WIRING BOARDS – FL/KEY SECTION – • See page 37 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor FL BOARD (SIDE A) Location Ref. No. Location D801 D802 R846 R817 FB802 D803 R816 D804 R802 D805...

  • Page 66: Schematic Diagram - Fl/Key Section

    HCD-FX900W 7-29. SCHEMATIC DIAGRAM – FL/KEY SECTION – • See page 81 for IC Block Diagram. R833 D811 D812 D813 D814 D815 SML-020MDT SML-020MDT SML-020MDT SML-020MDT SML-020MDT R839 R838 R837 R836 R835 R834 4.7k 2.2k 2.2k S815 S814 S813 S812...

  • Page 67: Printed Wiring Boards - Jack/Sp Section

    HCD-FX900W 7-30. PRINTED WIRING BOARDS – JACK/SP SECTION – • See page 37 for Circuit Boards Location. :Uses unleaded solder. BOARD JACK BOARD (SIDE A) (SIDE A) Q475 Q474 R414 R413 R412 C413 C412 FB475 FB410 R471 R488 C423 C422...

  • Page 68: Schematic Diagram - Jack/Sp Section

    HCD-FX900W 7-31. SCHEMATIC DIAGRAM – JACK/SP SECTION – SUFFIX-15 SUFFIX-15 SUPPLEMENT-1 SUPPLEMENT-1 Page 6 Page 8 SUFFIX-15 SUFFIX-15 SUPPLEMENT-1 SUPPLEMENT-1 Page 6 Page 8 Q470 RT1N441C-TP-1 CN1301 CN1302 CN1303 EH-S 4P VH-L 2P EH-S 6P FB470 R472 FB471 CN401 EP1301...

  • Page 69: Printed Wiring Board - I/O Section (Side A)

    HCD-FX900W 7-32. PRINTED WIRING BOARD – I/O SECTION (SIDE A) – • See page 37 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location D300 IC201 IC202 IC230 IC302 IC350 IC351 IC360 IC372 BOARD (SIDE A)

  • Page 70: Printed Wiring Board - I/O Section (Side B)

    HCD-FX900W 7-33. PRINTED WIRING BOARD – I/O SECTION (SIDE B) – • See page 37 for Circuit Boards Location. :Uses unleaded solder. BOARD (SIDE B) • Semiconductor Location Ref. No. Location D372 D373 J202 D374 J201 COMPONENT VIDEO MONITOR OUT...

  • Page 71: Schematic Diagram - I/O Section

    HCD-FX900W 7-34. SCHEMATIC DIAGRAM – I/O SECTION – • See page 78 for Waveforms. • See page 81, 82 for IC Block Diagrams. CN303 CN302 L371 R317 R387 TP324 C388 TP325 C387 TP326 L301 C313 IC301 TORX147L C312 C376 C371...

  • Page 72: Printed Wiring Board - Power Section

    HCD-FX900W 7-35. PRINTED WIRING BOARD – POWER SECTION – • See page 37 for Circuit Boards Location. :Uses unleaded solder. (CHASSIS) • Semiconductor R969 EB902 D907 Location D906 R906 R926 R925 C907 Ref. No. Location D908 IC901 D913 R907 D901...

  • Page 73: Schematic Diagram - Power Section

    HCD-FX900W 7-36. SCHEMATIC DIAGRAM – POWER SECTION – (CHASSIS) EB905 C938 D931 FCU20UC20 330p 250V CN902 TP903 WIRE 3P C963 CN901 C930 0.0022 FH901 FH902 100p 250V HOLDER HOLDER L931 TH901 D901 250V TP901 R931 R940 R937 TP904 FUSE FUSE...

  • Page 74: Printed Wiring Board - Diat Tx Xm Section

    HCD-FX900W 7-37. PRINTED WIRING BOARD – DIAT TX XM SECTION – • See page 37 for Circuit Boards Location. :Uses unleaded solder. (SIDE B) DIAT TX XM BOARD (SIDE A) DIAT TX XM BOARD J1801 DIR-T1 J101 JP101 EB101 (CHASSIS)

  • Page 75: Schematic Diagram - Diat Tx Xm Section (1/2)

    HCD-FX900W 7-38. SCHEMATIC DIAGRAM – DIAT TX XM SECTION (1/2) – • See page 78 for Waveform. • See page 82 for IC Block Diagram. R110 DIAT TX XM BOARD (1/2) R115 100k R119 100k C116 C121 R122 100k R125...

  • Page 76: Schematic Diagram - Diat Tx Xm Section (2/2)

    HCD-FX900W 7-39. SCHEMATIC DIAGRAM – DIAT TX XM SECTION (2/2) – • See page 78 for Waveform. • See page 83 for IC Block Diagrams. DIAT TX XM BOARD TP1803 IC1800 CN1802 TA7809LS 2P 2.5MM R1816 C1832 2.2k 0.0047 L1804...
  • Page 77 HCD-FX900W • Waveforms – DMB12 Board – – MAIN Board – IC101 6 (DVDRFIP) IC101 <x// (YUV4) IC702 ws (XIN(I)) 1.1 Vp-p 3.6 Vp-p 81.3 ns 800 mVp-p 1 V/DIV, 20 µ s/DIV 1 V/DIV, 40 ns/DIV 200 mV/DIV, 100 ns/DIV IC101 <xx.
  • Page 78 HCD-FX900W – I/O Board – – DIAT TX XM Board – IC102 wk (OSCIN) IC201 e; (VOUTa) 2.5 Vp-p 2.2 Vp-p 22.1 ns 500 mV/DIV, 20 µ s/DIV 1 V/DIV, 40 ns/DIV IC201 es (C OUT) IC1804 tl (OSCO) 1.4 Vp-p 3.1 Vp-p...

  • Page 79: Ic Block Diagrams

    HCD-FX900W • IC Block Diagrams – RELAY Board – – DMB12 Board – IC701, 711, 721 BA6956AN IC150, IC705 SN74LVC1G08DCKR CONTROL LOGIC – MAIN Board – IC3100, IC3150, IC3200, IC3250, IC3300, IC3400, IC3500 CXD9883M BST_A PVDD_A Over Current Fault GVDD_A...
  • Page 80 HCD-FX900W – MAIN Board – IC3010, IC3020, IC3030 CXD9876R CLOCK CLOCK GENERATOR GENERATOR 36 XFSIIN (SECONDARY) (PRIMARY) XVSS 35 DVDD VSUBC 34 TEST 33 BFVSS VSSR OUTR2 32 BFVDD VDDR DATA OUTR1 FILTER & SAMPLING LINER GAIN ∆ Σ LOW CUT...

  • Page 81: Key Board

    HCD-FX900W – MAIN Board – IC702 LC89056W-E AUDIO C BIT PA/PB DETECT DETECT EMPHA SAMPLING FREQUENCY MICROCOMPUTER INTERFACE XSEL LOCK XOUT CLOCK DETECT XMCK 19 DVDD MODE0 MODE 18 DGND SELECT MODE1 XSTATE DGND DATAO DVDD LRCK DOSEL0 DATA TIMING...
  • Page 82 HCD-FX900W – I/O Board – IC201 BH7868FS-E2 6MHz VCC1 75Ω 32 C OUT S-DC OUT 31 S-DC OUT S1/S2 C IN BIAS MUTE1 MUTE1 6MHz 75Ω CV OUT CV IN CLAMP CV OUT SAG SEL (CV/MIX) 6MHz Y IN CLAMP 75Ω...
  • Page 83 HCD-FX900W – DIAT TX XM Board – IC1801 TK11225CMCL-G CONTROL CIRCUIT CONSTANT OVER HEAT & CURRENT OVER CURRENT SOURCE PROTECT BANDGAP REFERENCE IC1804 CXD4016R 48 47 46 45 44 41 40 39 38 37 36 TEST4 TEST3 TEST2 CLOCK TEST1...
  • Page 84 HCD-FX900W • IC Pin Function Description MAIN BOARD IC501 M30626MJP-A02FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP_SCDT/ DAMP processor and Diat data output DIAT_SDATA DAMP_SHIFT/ DAMP processor and Diat clock output DIAT_SCLK DSP_INTR DSP interrupt SIRCS_IN SIRCS input DSP_MOSI/DIR_DIN...
  • Page 85 HCD-FX900W Pin No. Pin Name Description DRIVE_OCP (DIAG) DAMP driver shut down OVERFLOW1 DAMP processor F/C/S over flow detect OVERFLOW2 DAMP processor SW over flow detect WRITE CE Flash write CE (not used, pull up) DAMP LATCH1 DAMP processor latch1...
  • Page 86 HCD-FX900W Pin No. Pin Name Description IO_DO/DAMP FSDLY I/O expander IC data input IO_CLK I/O expander IC clock output MONO/ST_DET Front jack MONO or STEREO detect A.CAL MIC LEVEL/ MIC level detect for auto calibration or AUDIO selector 2 A.SEL2...
  • Page 87 HCD-FX900W DMB12 BOARD IC101 CXD9804R (CD/DVD RF AMP, FOCUS/TRACKING ERR AMP, DVD SYSTEM PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description AGND — Ground terminal DVDA AC coupled input path A DVDB AC coupled input path B DVDC AC coupled input path C...
  • Page 88 HCD-FX900W Pin No. Pin Name Description Mute signal control output CKSW — Not used OCSW Servo 1 EEWP WF signal output to EEPROM (IC103) DVDD18 — Power supply (+1.8V from IC110) 53 to 59 HA 2 to 8 Address bus 2 to 8 output to FLASH ROM (IC102)
  • Page 89 HCD-FX900W Pin No. Pin Name Description Data bus 7 from SD-RAM (IC104) DVSS — Ground terminal 117, 118 RD 6, 5 Data bus 6, 5 from SD-RAM (IC104) DVSS — Ground terminal 120, 121 RD 4, 3 Data bus 4, 3 from SD-RAM (IC104) DVDD18 —...
  • Page 90 HCD-FX900W Pin No. Pin Name Description MUTE MUTE signal output to Motor Driver (IC201) MUTE123 MUTE123 signal output to Motor Driver (IC201) REW signal output to Motor Driver (IC201) FWD signal output to Motor Driver (IC201) ADSD0 Not used XDACS...
  • Page 91 HCD-FX900W Pin No. Pin Name Description PLLVSS — Ground terminal IDAC — Not used PLLVDD3 — Power supply (RF+3.3V) LPFON Negative output of loop filter amplifier LPFIP Positive input of loop filter amplifier LPFIN Negative input of loop filter amplifier...

  • Page 92: Exploded Views

    HCD-FX900W SECTION 8 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by mark 0 or may have some difference from the original number in the exploded views are not supplied.

  • Page 93: Front Panel Assy

    HCD-FX900W 8-2. FRONT PANEL ASSY supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-660-943-01 PANEL, FRONT A-1154-516-A FL BOARD, COMPLETE 2-660-952-21 WINDOW A-1154-518-A KEY BOARD, COMPLETE 2-660-959-01 PROTECTOR, DUST 2-660-950-01 BUTTON (DISC) 2-660-946-11 PANEL, BUTTON...

  • Page 94: Chassis Section-1

    HCD-FX900W 8-3. CHASSIS SECTION-1 not supplied chassis section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-693-703-11 TUNER (FM/AM) (TM10SU) 3-077-331-21 +BV3 (3-CR) 1-787-396-11 D.C. FAN (50 SQUARE) 3-077-331-01 +BV3 (3-CR) 0 103 1-830-190-11 CORD, POWER...

  • Page 95: Chassis Section-2

    HCD-FX900W Ver. 1.1 8-4. CHASSIS SECTION-2 not supplied not supplied not supplied not supplied not supplied supplied not supplied not supplied not supplied DVD mechanism deck section F901 not supplied not supplied Ref. No. Part No. Description Remark Ref. No.

  • Page 96: Dvd Mechanism Deck Section-1 (Cdm69Eh-Dvbu101)

    HCD-FX900W 8-5. DVD MECHANISM DECK SECTION-1 (CDM69EH-DVBU101) S702 M761 DVD mechanism deck section-2 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-686-725-11 STOCKER MOTOR BOARD 4-239-699-01 PULLEY 3-087-053-01 +BVTP2.6 (3CR) 4-211-237-01 BELT (MODE) 4-239-690-01 CAM (STOCKER U/D)

  • Page 97: Dvd Mechanism Deck Section-2 (Cdm69Eh-Dvbu101)

    HCD-FX900W 8-6. DVD MECHANISM DECK SECTION-2 (CDM69EH-DVBU101) DVD mechanism deck section-3 DVD mechanism deck section-4 optical pick-up section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-686-727-11 SW (1) BOARD 3-087-053-01 +BVTP2.6 (3CR) 1-686-728-11 SW (2) BOARD 1-686-729-11 SW (3) BOARD 4-985-672-01 SCREW (+PTPWH M2.6), FLOATING...

  • Page 98: Dvd Mechanism Deck Section-3 (Cdm69Eh-Dvbu101)

    HCD-FX900W 8-7. DVD MECHANISM DECK SECTION-3 (CDM69EH-DVBU101) not supplied supplied not supplied supplied supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-240-040-01 SPRING (DISC STOPPER), TORSION 4-240-039-01 LEVER (DISC STOPPER) 4-992-069-01 SCREW (+PTPWH) (M2) (DIA. 7)

  • Page 99: Dvd Mechanism Deck Section-4 (Cdm69Eh-Dvbu101)

    HCD-FX900W 8-8. DVD MECHANISM DECK SECTION-4 (CDM69EH-DVBU101) supplied M781 DVD mechanism deck section-5 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-4954-626-1 LEVER (ROLLER) ASSY 4-240-041-01 SPRING (SLIDER 2), TENSION 4-239-666-01 GEAR 3-087-053-01 +BVTP2.6 (3CR) 4-239-668-01 LEVER (CENTER)

  • Page 100: Dvd Mechanism Deck Section-5 (Cdm69Eh-Dvbu101)

    HCD-FX900W 8-9. DVD MECHANISM DECK SECTION-5 (CDM69EH-DVBU101) DVD mechanism deck section-6 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-240-020-01 GEAR (TIMING) 4-239-699-01 PULLEY 4-239-708-02 BELT (FRONT), TIMING 4-247-349-02 BELT (ROLLER V) 4-239-697-01 GEAR (CENTER) 4-227-899-31 SCREW (DIA. 12), FROATING...

  • Page 101: Dvd Mechanism Deck Section-6 (Cdm69Eh-Dvbu101)

    HCD-FX900W 8-10. DVD MECHANISM DECK SECTION-6 (CDM69EH-DVBU101) M771 not supplied supplied S771 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-239-693-01 CAM (GEAR) 4-241-731-01 SHUTTER (A), LEVER 1-686-723-11 SENSOR BOARD 4-239-696-01 GEAR (EJECT LOCK) 4-241-732-01 SHUTTER (B), LEVER...

  • Page 102: Optical Pick-Up Section (Khm-310Cab/C2Rp)

    HCD-FX900W 8-11. OPTICAL PICK-UP SECTION (KHM-310CAB/C2RP) not supplied Ref. No. Part No. Description Remark 0 601 8-820-291-02 OPTICAL PICK-UP (KHM-310CAB/C2RP) 3-087-599-01 INSULATOR SCREW 3-088-372-01 INSULATOR...

  • Page 103: Electrical Parts List

    HCD-FX900W SECTION 9 DIAT TX XM ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name.
  • Page 104 HCD-FX900W DIAT TX XM Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < DIODE > R108 1-216-809-11 METAL CHIP 1/10W R110 1-216-809-11 METAL CHIP 1/10W D101 8-719-988-61 DIODE 1SS355TE-17 R111 1-216-845-11 METAL CHIP 100K 1/10W D102...
  • Page 105 HCD-FX900W DIAT TX XM DMB12 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1833 1-216-833-11 METAL CHIP 1/10W C145 1-165-908-11 CERAMIC CHIP R1834 1-216-833-11 METAL CHIP 1/10W C147 1-165-176-11 CERAMIC CHIP 0.047uF R1837 1-216-803-11 METAL CHIP...
  • Page 106 HCD-FX900W Ver. 1.1 DMB12 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C222 1-107-826-11 CERAMIC CHIP 0.1uF FB111 1-469-670-21 FERRITE, EMI (SMD) (2012) C224 1-162-970-11 CERAMIC CHIP 0.01uF FB112 1-469-670-21 FERRITE, EMI (SMD) (2012) C233 1-162-968-11 CERAMIC CHIP 0.0047uF 10%...
  • Page 107 HCD-FX900W DMB12 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R103 1-216-864-11 SHORT CHIP R105 1-216-833-11 METAL CHIP 1/10W R184 1-216-805-11 METAL CHIP 1/10W R106 1-216-833-11 METAL CHIP 1/10W R185 1-216-805-11 METAL CHIP 1/10W R191 1-216-821-11 METAL CHIP...
  • Page 108 HCD-FX900W DMB12 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R749 1-216-824-11 METAL CHIP 1.8K 1/10W R750 1-216-824-11 METAL CHIP 1.8K 1/10W R1169 1-216-805-11 METAL CHIP 1/10W R751 1-216-864-11 SHORT CHIP R1170 1-216-864-11 SHORT CHIP R1173...
  • Page 109 HCD-FX900W DMB12 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RB105 1-234-371-21 RES, NETWORK 47 (1005X4) RB106 1-234-371-21 RES, NETWORK 47 (1005X4) < DIODE > RB107 1-234-400-21 CONDUCTOR, NETWORK (2010X4) D801 8-719-988-61 DIODE 1SS355TE-17 RB108 1-234-400-21 CONDUCTOR, NETWORK (2010X4)
  • Page 110 HCD-FX900W Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C202 1-126-925-91 ELECT 470uF C360 1-164-156-11 CERAMIC CHIP 0.1uF C203 1-126-933-11 ELECT 100uF C204 1-164-156-11 CERAMIC CHIP 0.1uF C361 1-104-662-91 ELECT 22uF C205 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 111 HCD-FX900W JACK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L350 1-469-525-91 INDUCTOR 10uH R337 1-216-829-11 METAL CHIP 4.7K 1/10W L371 1-469-525-91 INDUCTOR 10uH R338 1-216-829-11 METAL CHIP 4.7K 1/10W R339 1-216-841-11 METAL CHIP 1/10W < TRANSISTOR >...
  • Page 112 HCD-FX900W JACK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > < RESISTOR > CN401 1-785-319-11 PIN, CONNECTOR (STRAIGHT) 7P R401 1-216-827-11 METAL CHIP 3.3K 1/10W CN402 1-785-317-11 PIN, CONNECTOR (STRAIGHT) 5P R402 1-216-829-11 METAL CHIP 4.7K...
  • Page 113 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C827 1-162-960-11 CERAMIC CHIP 220PF S812 1-786-033-61 SWITCH, TACTILE (DISC4) C833 1-164-360-11 CERAMIC CHIP 0.1uF S813 1-786-033-61 SWITCH, TACTILE (DISC3) S814 1-786-033-61 SWITCH, TACTILE (DISC2) < CONNECTOR >...
  • Page 114 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C501 1-107-826-11 CERAMIC CHIP 0.1uF C714 1-107-826-11 CERAMIC CHIP 0.1uF C502 1-107-826-11 CERAMIC CHIP 0.1uF C716 1-162-970-11 CERAMIC CHIP 0.01uF C717 1-126-964-11 ELECT 10uF C503 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 115 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3054 1-126-933-11 ELECT 100uF C3164 1-136-177-00 FILM C3055 1-162-970-11 CERAMIC CHIP 0.01uF C3165 1-136-177-00 FILM C3166 1-112-831-11 ELECT 2200uF C3056 1-126-923-91 ELECT 220uF C3167 1-162-966-11 CERAMIC CHIP 0.0022uF 10%...
  • Page 116 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3312 1-112-246-11 ELECT 100uF * CN506 1-564-714-11 PIN, CONNECTOR (SMALL TYPE) 12P C3313 1-104-329-11 CERAMIC CHIP 0.1uF CN601 1-778-691-11 CONNECTOR, FFC/FPC 19P C3314 1-136-177-00 FILM CN621...
  • Page 117 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L3051 1-414-754-11 INDUCTOR 10uH FB509 1-469-324-21 FERRITE, EMI (SMD) (2012) L3052 1-414-754-11 INDUCTOR 10uH FB510 1-469-324-21 FERRITE, EMI (SMD) (2012) L3053 1-414-754-11 INDUCTOR 10uH FB671 1-216-864-11 SHORT CHIP...
  • Page 118 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-801-11 METAL CHIP 1/10W R539 1-216-833-11 METAL CHIP 1/10W 1-216-801-11 METAL CHIP 1/10W 1-216-833-11 METAL CHIP 1/10W R540 1-216-833-11 METAL CHIP 1/10W 1-216-857-11 METAL CHIP 1/10W...
  • Page 119 HCD-FX900W MAIN Ref. No. Ref. No. Part No. Part No. Description Description Remark Remark Ref. No. Part No. Description Remark R634 1-216-813-11 METAL CHIP 1/10W R729 1-216-809-11 METAL CHIP 1/10W R635 1-216-833-11 METAL CHIP 1/10W R651 1-216-809-11 METAL CHIP 1/10W...
  • Page 120 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3054 1-216-801-11 METAL CHIP 1/10W R3166 1-216-797-11 METAL CHIP 1/10W R3055 1-216-809-11 METAL CHIP 1/10W R3057 1-216-809-11 METAL CHIP 1/10W R3169 1-216-136-00 RES-CHIP 1/8W R3059 1-216-833-11 METAL CHIP...
  • Page 121 HCD-FX900W MAIN MODE MOTOR POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3327 1-216-845-11 METAL CHIP 100K 1/10W A-1159-000-A POWER BOARD, COMPLETE R3401 1-216-809-11 METAL CHIP 1/10W *********************** R3402 1-216-809-11 METAL CHIP 1/10W R3403 1-216-797-11 METAL CHIP...
  • Page 122 HCD-FX900W POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C970 1-100-566-91 CERAMIC CHIP 0.1uF C971 1-100-566-91 CERAMIC CHIP 0.1uF L948 1-414-398-11 INDUCTOR 10uH C976 1-126-933-11 ELECT 100uF L951 1-414-398-11 INDUCTOR 10uH L952 1-414-398-11 INDUCTOR 10uH <...
  • Page 123 HCD-FX900W POWER RELAY ROLLER MOTOR SENSOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R952 1-218-855-11 METAL CHIP 2.2K 0.5% 1/10W < DIODE > R953 1-218-861-11 METAL CHIP 3.9K 0.5% 1/10W R954 1-216-837-11 METAL CHIP 1/10W D701 8-719-921-44 DIODE MTZJ-5.1C...
  • Page 124 HCD-FX900W ST ENCODER STOCKER MOTOR SW (1) SW (2) SW (3) SW (4) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1318 1-163-021-91 CERAMIC CHIP 0.01uF S717 1-786-382-21 SWITCH, PUSH (1 KEY) (DISC POSITION) C1319 1-163-021-91 CERAMIC CHIP 0.01uF...
  • Page 125 HCD-FX900W US Model Canadian Model SERVICE MANUAL Ver. 1.1 2006.09 SUPPLEMENT-1 Subject: MAIN board changed to suffix-15 from suffix-14 Part number of printed wiring board changed to suffix-15 from suffix-14. It has any difference between suffix-14 and suffix-15. This supplement-1 describes the difference in the two boards.
  • Page 126 HCD-FX900W DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards. Note: Note: • All capacitors are in µF unless otherwise noted. (p: pF) •...
  • Page 127 HCD-FX900W PRINTED WIRING BOARD – MAIN SECTION (SIDE A) – :Uses unleaded solder. DMB12 BOARD • Semiconductor CN109 Location ORIGINAL SERVICE MANUAL Page 46 Ref. No. Location IC90 J-11 IC3050 IC501 D-10 CN504 FB505 C3055 IC502 C-13 L3052 IC503 L3051...
  • Page 128 HCD-FX900W PRINTED WIRING BOARD – MAIN SECTION (SIDE B) – :Uses unleaded solder. POWER BOARD JACK BOARD POWER BOARD CN902 CN403 CN904 ORIGINAL SERVICE ORIGINAL SERVICE ORIGINAL SERVICE • Semiconductor MANUAL Page 72 MANUAL Page 67 MANUAL Page 72 (CHASSIS)
  • Page 129 HCD-FX900W SCHEMATIC DIAGRAM – MAIN SECTION (1/8) – R3060 R3059 EB3001 TERMINAL BOARD C3035 C3034 R3062 TP3031 R3063 R3031 R3064 TP3003 R3065 TP3004 R3066 ICT3063 R3067 R3032 R3068 R3069 TP3032 R3033 R3070 C3033 R3071 R3072 R3034 R3073 R3035 R3301 C3071...
  • Page 130 HCD-FX900W SCHEMATIC DIAGRAM – MAIN SECTION (2/8) – R3501 R3502 C3406 0.033 ICT3010 C3403 ICT3011 C3413 ICT3060 R3061 C3551 1 50V R3403 TP3410 C3412 ICT3061 R3404 R3551 100k ICT3050 R3407 L3402 C3504 C3415 C3404 D3402 P6SMBJ33A-5 L3401 D3401 D3552 ICT3012...
  • Page 131 HCD-FX900W • See page 3 for Waveform. SCHEMATIC DIAGRAM – MAIN SECTION (3/8) – R3055 C3015 C3014 R3011 R3050 ICT3003 Q3081 R3012 ICT3004 RT1P141C TP3011 R3151 R3013 TP3012 C3013 R3091 C3083 100p 50V CH R3087 ICT3005 R3085 C3085 R3014 R3152...
  • Page 132 HCD-FX900W SCHEMATIC DIAGRAM – MAIN SECTION (4/8) – C3206 0.033 ICT3027 C3203 Q3252 ICT3028 2SA1235TP-1EF C3213 Q3202 2SA1235TP-1EF R3203 TP3210 C3212 R3204 C3220 0.0022 ICT3082 R3207 C3215 C3272 C3219 0.0022 0.001 ICT3081 C3221 C3271 ICT3056 C3204 D3202 L3202 R3220 P6SMBJ33A-5...
  • Page 133 HCD-FX900W • See page 3 for Waveform. SCHEMATIC DIAGRAM – MAIN SECTION (5/8) – CN601 TP601 R554 TP602 TP603 TP604 C518 TP605 R604 R501 TP606 R605 ICT538 R503 TP607 R606 TP608 R607 C504 0.01 TP609 R608 TP610 R609 I/O BOARD...
  • Page 134 HCD-FX900W SCHEMATIC DIAGRAM – MAIN SECTION (6/8) – CN621 IC622 BH2210FV-E2 TP621 RB626 RB630 TP622 TP623 TP624 TP625 TP626 TP627 TP646 TP628 TP645 TP629 TP644 TP630 TP643 TP631 RB629 TP632 R623 RB625 TP633 FB504 TP634 C625 ICT550 R634 C534 FB506...
  • Page 135 HCD-FX900W • See page 3 for Waveform. SCHEMATIC DIAGRAM – MAIN SECTION (7/8) – IC652 SRC4182 R666 ICT521 IC651 EB701 TC7SH08FU TERMINAL BOARD R659 EB703 GROUND TERMINAL BOARD GROUND R662 ICT501 R667 R651 TP658 C652 R665 C651 R658 TP657 ICT502...
  • Page 136 HCD-FX900W • See page 3 for Waveform. SCHEMATIC DIAGRAM – MAIN SECTION (8/8) – SI-3010KM-TL 1/10W 0.5% TP10 1000 6.3V TP11 1/10W 0.5% I C 9 0 C782 AND GATE IC90 SN74LVC1G08DCKR IC782 74LVC1G79GW-125 R782 TP49 C783 0.22 ICT557 C781 0.01...
  • Page 137 HCD-FX900W ELECTRICAL PARTS LIST MAIN NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name. specified in the diagrams or the components •...
  • Page 138 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C625 1-107-826-11 CERAMIC CHIP 0.1uF C3024 1-164-156-11 CERAMIC CHIP 0.1uF C626 1-162-970-11 CERAMIC CHIP 0.01uF C627 1-162-970-11 CERAMIC CHIP 0.01uF C3025 1-164-156-11 CERAMIC CHIP 0.1uF C651 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 139 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3114 1-136-177-00 FILM C3263 1-104-329-11 CERAMIC CHIP 0.1uF C3115 1-136-177-00 FILM C3264 1-136-177-00 FILM C3116 1-112-831-11 ELECT 2200uF C3265 1-136-177-00 FILM C3117 1-162-966-11 CERAMIC CHIP 0.0022uF 10%...
  • Page 140 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3513 1-104-329-11 CERAMIC CHIP 0.1uF EB3002 1-537-770-21 TERMINAL BOARD, GROUND C3514 1-136-177-00 FILM EB3003 1-537-770-21 TERMINAL BOARD, GROUND C3515 1-136-177-00 FILM EB3004 1-537-770-21 TERMINAL BOARD, GROUND...
  • Page 141 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC3250 6-708-921-01 IC CXD9883M 1-216-821-11 METAL CHIP 1/10W IC3300 6-708-921-01 IC CXD9883M 1-216-864-11 SHORT CHIP 1-218-854-11 METAL CHIP 0.5% 1/10W IC3400 6-708-921-01 IC CXD9883M 1-218-871-11 METAL CHIP 0.5%...
  • Page 142 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R516 1-216-821-11 METAL CHIP 1/10W R615 1-216-864-11 SHORT CHIP R517 1-216-809-11 METAL CHIP 1/10W R621 1-216-809-11 METAL CHIP 1/10W R518 1-216-809-11 METAL CHIP 1/10W R519 1-216-833-11 METAL CHIP...
  • Page 143 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R717 1-216-809-11 METAL CHIP 1/10W R3026 1-216-809-11 METAL CHIP 1/10W R718 1-216-809-11 METAL CHIP 1/10W R3031 1-216-817-11 METAL CHIP 1/10W R719 1-216-809-11 METAL CHIP 1/10W R721...
  • Page 144 HCD-FX900W MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3127 1-216-845-11 METAL CHIP 100K 1/10W R3425 1-216-845-11 METAL CHIP 100K 1/10W R3151 1-216-809-11 METAL CHIP 1/10W R3426 1-216-845-11 METAL CHIP 100K 1/10W R3152 1-216-809-11 METAL CHIP...
  • Page 145 HCD-FX900W MEMO...

  • Page 146: Revision History

    HCD-FX900W REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2006.04...

Table of Contents