hit counter script
Sony HCD-FC8 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-FC8 - System Components
  6. Service manual
Sony HCD-FC8 Service Manual

Sony HCD-FC8 Service Manual

Sac/dvd reciever
Hide thumbs Also See for HCD-FC8:
Table of Contents

Advertisement

Quick Links

Download this manual

SERVICE MANUAL

Ver 1.0 2003. 08
HCD-FC8/FC9 are the amplifier, DVD/SACD and
tuner section in DAV-FC8/FC9 .
AUDIO POWER SPECIFICATIONS POWER
OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohm loads, both channels driven, from 20 –
20,000 Hz; rated 75 watts per channel minimum RMS
power, with no more than 0.7 % total harmonic
distortion. (from 250 milli watts to rated output)
Amplifier section
Stereo mode
100 W + 100 W (4 ohms
at 1 kHz, THD 10 %)
100
Surround mode
Front:
centre*:
100
Surround*:
100
W (4 ohms at 1 kHz,
THD 10 %)
Subwoofer*:
(4 ohms at 100 Hz, THD
10 %)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs
VIDEO 1:
Sensitivity: 150 mV
Impedance: 50 kilohms
VIDEO 2:
Sensitivity: 300 mV
Impedance: 50 kilohms
VIDEO 1 (AUDIO
Outputs
OUT):
Voltage: 1 V
Impedance: 1 kilohm
PHONES:
Accepts stereo
headphones only.
Sony Corporation
9-961-134-01
2003H1678-1
Home Audio Company
© 2003.08
Published by Sony Engineering Corporation
HCD-FC8/FC9
SPECIFICATIONS
Super Audio CD/DVD system
Laser
Signal format system
Frequency response (at 2 CH STEREO mode)
100
W +
W
W
Harmonic distortion
100
W +
Tuner section
System
100
W
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
North American models: 531 – 1,710 kHz (with the
Other models:
Antenna
Intermediate frequency
Model Name Using Similar Mechanism
Mechanism Type
Base Unit Name
Optical Pick-up Name
Video section
S
emiconductor laser
Inputs
(Super Audio CD/DVD:
Outputs
λ
= 650 nm)
λ
(CD:
= 780 nm)
Emi
ssion duration:
continuous
NTSC or NTSC/PAL
DVD (PCM): 2 Hz to
22 kHz (±1.0 dB)
General
CD: 2 Hz to 20 kHz
(±1.0 dB)
Power requirements
Less than 0.03 %
Power consumption
Dimensions (approx.)
PLL quartz-locked digital
synthesizer system
Mass (approx.)
87.5 – 108.0 MHz
Operating temperature
(100 kHz step)
Operating humidity
FM wire antenna
75 ohms, unbalanced
Design and specification are subject to change without
10.7 MHz
notice.
interval set at 9 kHz)
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,710 kHz (with the
interval set at 10 kHz)
AM loop antenna
SACD/DVD RECEIVER
450 kHz
US Model
HCD-FC8/FC9
Canadian Model
HCD-FC9
HCD-FC7
CDM69-DVBU16
DVBU16
TDP022W
Video: 1 Vp-p 75 ohms
Video: 1 Vp-p 75 ohms
S video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
/C
: 0.7 Vp-p
B
B
R
R
75 ohms
120 V AC, 60 Hz
135 W
×
×
380
70
345 mm
×
×
( 15 2
/
13
/
inches)
7
8
5
8
(w/h/d) incl. projecting
parts
4.8 kg (10 lb 10 oz)
5°C to 35°C (41°F to 95°F)
5 % to 90 %

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-FC8

Summary of Contents for Sony HCD-FC8

  • Page 1: Service Manual

    HCD-FC8/FC9 SERVICE MANUAL US Model HCD-FC8/FC9 Ver 1.0 2003. 08 Canadian Model HCD-FC9 HCD-FC8/FC9 are the amplifier, DVD/SACD and tuner section in DAV-FC8/FC9 . Model Name Using Similar Mechanism HCD-FC7 Mechanism Type CDM69-DVBU16 Base Unit Name DVBU16 Optical Pick-up Name...

  • Page 2: Leakage Test

    CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    HCD-FC8/FC9 TABLE OF CONTENTS 1. SERVICING NOTE 7-12. SCHEMATIC DIAGRAM ·························································· 4 – DVD SECTION (4/10) – ·········································· 50 7-13. SCHEMATIC DIAGRAM 2. GENERAL ·········································································· 7 – DVD SECTION (5/10) – ·········································· 51 7-14. SCHEMATIC DIAGRAM 3. DISASSEMBLY ······························································ 10 –...

  • Page 4: Servicing Note

    The flexible board is easily damaged and should be handled with care. Model PARTS No. NOTES ON LASER DIODE EMISSION CHECK HCD-FC8: US model 4-248-520-0s HCD-FC9: US, Canadian models 4-248-520-3s The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block.
  • Page 5 HCD-FC8/FC9 • Service position of POWER board POWER board power cord Power cord is directly connected without going via LF board . • Service position of DVD board J-2501-242-A (1mm/11P/L300) AMP board J-2501-231-A (1mm/15P/L300) POWER board DVD board...
  • Page 6 HCD-FC8/FC9 • Service position of AMP board AMP board AMP board cannot be moved unless it removes side panel and back panel .

  • Page 7: General

    HCD-FC8/FC9 SECTION 2 GENERAL This section is extracted from instruction manual. Front Panel A Disc slot (24) I PHONES jack (on the side of the system) (24) B DISC 1-5 A (eject)/indicators (24) J SOUND FIELD –/+ (47, 48, 49)

  • Page 8: Rear Panel

    HCD-FC8/FC9 Rear Panel HCD-FC8 SCAN SELECT FRONT R CENTER FRONT L MONITOR OUT VIDEO 2 S VIDEO VIDEO 1 VIDEO AUDIO OUT VIDEO OUT AUDIO IN VIDEO IN SELECTABLE SURR R WOOFER SURR L INTERLACE COMPONENT VIDEO OUT OPTICAL DIGITAL...
  • Page 9 HCD-FC8/FC9 G PLAY MODE (33, 34, 35) Remote H CLEAR (34, 35, 36, 38) I TV (59) J AUDIO (45) K ANGLE (51) L SUBTITLE (52) M ./>, PREV/NEXT, PRESET –/+ (26, 28, 60, 61) N H (play) (24, 28, 34, 35) O X (pause) (26) P DVD TOP MENU/ALBUM–...

  • Page 10: Disassembly

    HCD-FC8/FC9 SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. FRONT PANEL SECTION, SIDE PANEL (L)/(R) SECTION DDCON BOARD, LED BOARD, POWER BOARD FL BOARD KEY BOARD AMP BOARD DVD BOARD, DC FAN CD MECHANISM DECK...

  • Page 11: Side Panel (L)/(R) Section

    HCD-FC8/FC9 Note: Follow the disassembly procedure in the numerical order given. 3-1. FRONT PANEL SECTION, SIDE PANEL (L)/(R) SECTION front panel section 4 wire (flat type)(CN005) 6 two screws 2 four screws (+BVTP 3 × 8) (+BV SUMITITE B3) 8 side panel (L)

  • Page 12: Ddcon Board, Led Board, Fl Board

    HCD-FC8/FC9 3-2. DDCON BOARD, LED BOARD, FL BOARD qf panel top (R) qs band button qa panel top (L) 8 wire (flat type) 9 FL board qd three screws (+BVTP 3 × 8) qg front (ml) panel 0 three screws (+BVTP 3 ×...

  • Page 13: Power Board

    HCD-FC8/FC9 3-4. POWER BOARD 1 screw 8 connector (CN903) (+BVTP 3 × 8) 2 power sheet 4 two screws 7 connector (CN904) (+BVTP 3 × 8) 6 sheet 3 connector (CN902) 5 screw (+BVTP 3 × 8) q; POWER board 9 power sheet 3-5.

  • Page 14: Dvd Board, Dc Fan

    HCD-FC8/FC9 3-6. DVD BOARD, DC FAN 3 two screws 5 two screws (+BVTP 3 × 8) (+BVTP 3 × 8) 8 wire (flat type)(CN001) 4 sheet 0 connector (CN008) 6 power bracket 7 wire (flat type)(CN002) qd sheet qf sheet...

  • Page 15: Cd Mechanism Deck (Cdm69-Dvbu16)

    HCD-FC8/FC9 3-7. CD MECHANISM DECK (CDM69-DVBU16) 1 two screws (BVTP 3 × 8) 2 two screws (BVTP 3 × 8) 6 wire (flat type) (CN002) 7 CD mechanism deck (CDM69-DVBU16) 5 wire (flat type) (CN701) two claws...

  • Page 16: Lf Board

    HCD-FC8/FC9 3-8. SELECTOR BOARD, VIDEO BOARD, LF BOARD qs two screws (+BVTP 3 × 8) qd LF board 5 two screws 9 two screws (+BTP 3 × 6) (+BVTP 3 × 8) 1 screw 6 md cover (+BVTP 3 × 8)

  • Page 17: Base Unit (Dvbu16)

    HCD-FC8/FC9 3-10. BASE UNIT (DVBU16) 3 boss 1 screw (PTPWHM2.6) 5 boss 4 boss 6 base unit (DVBU16) 3-11. PICK-UP UNIT (TDP022W) 1 step screw (M) 2 step screw (M) 7 insulator 0 pick-up unit (TDP022W) 8 insulator 3 step screw (M)

  • Page 18: Sw Board, Bracket (Top) Assy

    HCD-FC8/FC9 3-12. SW BOARD, BRACKET (TOP) ASSY 4 SW board (3) 3 SW board (2) 5 SW board (4) 1 four screws 6 six screws (BTP2.6 × 6) (BVTP2.6 × 8) 2 SW board (1) 7 bracket (top) assy 3-13. RELAY BOARD 0 RELAY board –...

  • Page 19: Motor (Stocker) Assy (Stocker)(M761)

    HCD-FC8/FC9 3-14. MOTOR (STOCKER) ASSY (STOCKER)(M761) 3 two screws (BVTP2.6 × 8) 2 Remove two solders 6 STOCKER MOTOR board 5 connector (CN761) 7 motor (stocker) assy (stocker) (M761) 1 belt (stocker) 3-15. MOTOR (STOCKER) ASSY (ROLLER)(M781) 3 two screws (BVTP2.6 ×...

  • Page 20: Motor (Stocker) Assy (Mode)(M771)

    HCD-FC8/FC9 3-16. MOTOR (STOCKER) ASSY (MODE)(M771) 3 two screws 1 Remove five solders (BVTP2.6 × 8) of rotary encoder. 4 MODE MOTOR board 6 motor (stocker) assy MODE MOTOR (mode) (M771) board 2 Remove two solders of motor (M771) 5 belt (mode) 3-17.

  • Page 21: Timing Belt (Front/Rear)

    HCD-FC8/FC9 3-18. TIMING BELT (FRONT/REAR) 3 slider (mode cam) assy 7 two gears (center) When install three timing belts, its pass under each claws. 8 timing belt (rear) timing belt (rear) 5 two gears 9 timing belt (rear) (center) two claws...

  • Page 22: Sensor Board

    HCD-FC8/FC9 3-20. SENSOR BOARD qj claw qk harness 9 cam (eject lock) 8 screw (PTPWH2.6 × 8) qs gear qg two claws (eject lock) qa cam w; SENSOR board qh rotary encoder (BU U/D) qd gear (S771) (mode 1) 7 shaft...

  • Page 23: Assembly

    HCD-FC8/FC9 SECTION 4 ASSEMBLY • This set can be assembled in the order shown below. 4-1. HOW TO INSTALL THE CAM (EJECT LOCK) 1 Rotate the cam (BU U/D) fully in the direction of arrow. 2 Engage the gear (eject lock) and the gear of the cam (eject lock) aligning the mark with the center of the gear (eject lock).

  • Page 24: How To Install The Gear (Mode 2)

    HCD-FC8/FC9 4-3. HOW TO INSTALL THE GEAR (MODE 2) 1 Align the mark on the rotary encoder (S771) with the projection of the assy. 2 Check that the cam (BU U/D) can not be rotated in the direction of arrow.

  • Page 25: How To Install The Rotary Encoder (S702), Gear (Stocker Communication)

    HCD-FC8/FC9 4-5. HOW TO INSTALL THE ROTARY ENCODER (S702), GEAR (STOCKER COMMUNICATION) 4 gear 5 screw (PTPWH2.6 × 8) (stocker communication) 3 screw 7 two screws (PWH2 × 6) (PTPWH2.6 × 8) 1 rotary encoder Engage the rotary encoder (S702)

  • Page 26: Test Mode

    HCD-FC8/FC9 SECTION 5 TEST MODE [Version Display Mode] [OSD Test Mode] * The software version is displayed. Procedure: Procedure: Press the ?/1 button on the main unit or the ?/1 button on Press three buttons of [FUNCTION], x and A (DISC 1) the remote commander to turn the set on.
  • Page 27 HCD-FC8/FC9 [GENERAL DESCRIPTION] 0-1. All (All items continuous check) This menu checks all diagnostic items continuously. Normally, all The Test Mode allows you to make diagnosis and adjustment easily items are checked successively one after another automatically using the remote commander and monitor TV. The instructions, unless an error is found, but at a certain item that requires judgment diagnostic results, etc.
  • Page 28 HCD-FC8/FC9 0-2-4. Model Type 1-1. DVD-SL (single layer) Model name is displayed. Press the 1 key on the remote commander and insert a DVD single layer disc following the message. Then the adjustment will be made 0-2-5. Region through the steps below, then adjusted values will be written to the Model destination code is displayed.
  • Page 29 HCD-FC8/FC9 24. Auto track gain adjust DRIVE MANUAL OPERATION Search Check Note: This mode is used for design, and not used in service fundamen- 25. 32Tj forward tally. 26. 32Tj reverse On the Test Mode Menu screen, press the key on the remote 27.
  • Page 30 HCD-FC8/FC9 2-1. Disc Type 2-1-3. Disc Type CD It sets up so that it may judge as a disc type of specification of the disc with which the set was inserted. Disc Type : CD disc (normal speed, 12 cm)
  • Page 31 HCD-FC8/FC9 2-3. Track/Layer Jump 2-5. EEPROM Write Adjust Track/Layer Jump EEPROM Write Adjust FWD R.Lj L0>L1 REV L.Lj L1>L0 1. Focus Offset 3.500Tj Fine FWD U.Fj L0>L1 2. Focus Gain 4.500Tj Fine REV D.Fj L1>L0 3. Trk. Offset Coarse 5.10kTj Dirc 4.
  • Page 32 HCD-FC8/FC9 2-7. Disc Check Memory MECHA AGING On the Test Mode Menu screen, selecting executes the aging of Disc Check Memory the mechanism deck. 1. SL Disc check ### Aging Test MENU ### 2. CD Disc check ** Pls use over 40min. CD ** 3.
  • Page 33 HCD-FC8/FC9 • Code list of Emergency History • Error code (aa) 10: Communication to RF AMP (IC001) failed. FF : Complete the initializing. (normal operation) 11: Each servo for focus, tracking, and spindle is unlocked. 11 : Stocker movement (to chucking position) failing in the midst 12: Check sum error of EEPROM (IC203).

  • Page 34: Electrical Adjustment

    HCD-FC8/FC9 SECTION 6 ELECTRICAL ADJUSTMENT [TEST DISC LIST] VERSION INFORMATION Use the following test disc on test mode. On the Test Mode Menu screen, selecting displays the ROM TDV-520CSO (DVD-SL): PART No. J-2501-236-A version and region code. LUV-P01 (CD): PART No. 4-999-032-01...

  • Page 35: Diagrams

    HCD-FC8/FC9 SECTION 7 DIAGRAMS 7-1. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For schematic diagrams. S-VIDEO board For printed wiring boards.

  • Page 36: Block Diagrams - Rf/Servo Section

    HCD-FC8/FC9 7-2. BLOCK DIAGRAMS – RF/SERVO SECTION – • SIGNAL PATH WARFI AUDIO(DSP) : AUDIO SECTION : CD CDDOUT AUDIO(DSP) : DVD : VIDEO SECTION : SACD 117 RFIN SD0 – SD7 (for AUDIO SYSTEM) AUDIO(DSP) AV DATA BUS DOUT...

  • Page 37: Audio Section

    HCD-FC8/FC9 – AUDIO SECTION – IC402 (2/2) REFERENCE VOLTAGE GENERATOR 127 WAVRB WARFI D1 – D4, SCK, RF/SERVO 126 WARFI 39 DSIFL DSAL BCKO, LRCKO AUDIO OUT SECTION SDO4 SECTION RF/SERVO DSAR 40 DSIFR 123 WCK 18 SDI1 SECTION POFLR...

  • Page 38: Audio Out Section

    HCD-FC8/FC9 – AUDIO OUT SECTION – HCD-FC9 IC608 J302 D/A CONVERTER AUDIO • SIGNAL PATH WOOFER 3 SDTI AOUTL+ : AUDIO HPOUTL1 J205 (2/4) AOUTL– IC610 HPOUTL2 VIDEO 1 IC305 J900 1 MCLK LOW-PASS AUDIO OUT HEADPHONE BCKO FILTER 2 BICK...

  • Page 39: Video Section

    HCD-FC8/FC9 – VIDEO SECTION – J205 (3/4) • SIGNAL PATH VIDEO 1 : VIDEO VIDEO IN IC207 VIDEO INPUT J206 (2/3) SELECTOR IC209 VIDEO 2 : CHROMA VIDEO SELECTOR VIDEO IN J205 (4/4) 1 IN1 : COMPONENT VIDEO VIDEO 1...

  • Page 40: Power Section

    HCD-FC8/FC9 – POWER SECTION – T801 DC-DC CONVERTER IC902 FL58 IC721 CHANGER CONTROLLER STOCKER MOTOR DRIVE (MOTOR, SWITCH) TO FLUORESCENT INDICATOR TUBE D806 – 809 M761 OUT1 RECT (STOCKER) OUT2 Q803, 804 IC711 ROLLER MOTOR DRIVE IC308 STREAM PROCESSOR +1.8V +1.8V...

  • Page 41: Printed Wiring Board - Rf Section

    HCD-FC8/FC9 7-3. PRINTED WIRING BOARD – RF SECTION – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. RF BOARD RF BOARD (SIDE A) (SIDE B) FLEXIBLE BOARD OPTICAL PICK-UP BLOCK (TDP022W) • Semiconductor Location Ref. No. Location...

  • Page 42: Schematic Diagram - Rf Section

    HCD-FC8/FC9 7-4. SCHEMATIC DIAGRAM – RF SECTION – • See page 70 for Waveforms. • See page 80 for IC Block Diagrams. RFMON C006 C028 C027 R026 C013 C031 1000p CN002 C030 0.01 C026 AGND C025 R023 C029 RFAC 0.01...

  • Page 43: Changer Section

    HCD-FC8/FC9 7-5. PRINTED WIRING BOARD – CHANGER SECTION – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. • Semiconductor RELAY BOARD STOCKER MOTOR BOARD Location SW (4) BOARD Ref. No. Location D701 D711 D721 (STOCKER)

  • Page 44: Changer Section

    HCD-FC8/FC9 7-6. SCHEMATIC DIAGRAM – CHANGER SECTION – • See page 70 for Waveforms. • See page 79 for IC Block Diagrams. CNP751 CN702 R731 DIODE DIODE IC751 D SENSE D SENSE R733 RPR-220 CN701 R734 IC751 D+5V R732 M+12V...

  • Page 45: Dvd Section (Side A)

    HCD-FC8/FC9 7-7. PRINTED WIRING BOARD – DVD SECTION (SIDE A) – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. RELAY BOARD • Semiconductor CN701 Location (Page 43) Ref. No. Location D900 D901 IC206 IC612 IC301...

  • Page 46: Dvd Section (Side B)

    HCD-FC8/FC9 7-8. PRINTED WIRING BOARD – DVD SECTION (SIDE B) – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. • Semiconductor Location Ref. No. Location D902 D903 D904 D906 D907 IC906 IC902 IC001 IC002 IC900...

  • Page 47: Schematic Diagram

    HCD-FC8/FC9 7-9. SCHEMATIC DIAGRAM – DVD SECTION (1/10) – • See page 70 for Waveforms. • See page 73 for IC Block Diagrams. C403 FL401 C401 C402 CN401 R411 TO RF AMP R412 JL544 C404 R413 JL537 C405 JL536 10 16V...

  • Page 48: Schematic Diagram

    HCD-FC8/FC9 7-10. SCHEMATIC DIAGRAM – DVD SECTION (2/10) – • See page 70 for Waveforms. C526 R581 C527 R582 R583 R580 C519 0.01 R579 8.2k IC501 FAN8035 R534 R535 R533 C514 0.01 R532 R530 R531 R529 C512 0.01 R528 R525 R527 2.2k...

  • Page 49: Schematic Diagram

    HCD-FC8/FC9 7-11. SCHEMATIC DIAGRAM – DVD SECTION (3/10) – • See page 70 for Waveforms. • See page 75 for IC Block Diagrams. R729 C715 TP701 8.2k 0.0015 IC703(2/2) C703 NJM3404AV(TE2) TP702 IC706 R544 R540 MSM51V18165F- R545 100k 100k 60TSKR1 R725 1.8k...

  • Page 50: Schematic Diagram

    HCD-FC8/FC9 7-12. SCHEMATIC DIAGRAM – DVD SECTION (4/10) – • See page 70 for Waveforms. • See page 76 for IC Block Diagrams. C870 33000p R803 IC702 C795 TA48M025F(TE16L) IC808 6.3V MSM56V16160F-8TK C796 C797 FL810 FL811 CHIP EMI FILTER C840...

  • Page 51: Schematic Diagram

    HCD-FC8/FC9 7-13. SCHEMATIC DIAGRAM – DVD SECTION (5/10) – • See page 70 for Waveforms. • See page 75 for IC Block Diagrams. C303 0.01 FL301 Q301 DTC114EKA -T146 C301 C302 0.01 FL304 IC302 BR24L16F-WE2 IC802 TC7S32FU(TE85R) C320 0.01 R352...

  • Page 52: Schematic Diagram

    HCD-FC8/FC9 7-14. SCHEMATIC DIAGRAM – DVD SECTION (6/10) – • See page 70 for Waveforms. • See page 72 for IC Block Diagrams. CN003 TP023 R013 TP024 R015 TP025 FB004 TP026 R036 R257 TP027 R039 TP028 R041 FB202 C235 C201...

  • Page 53: Schematic Diagram

    HCD-FC8/FC9 7-15. SCHEMATIC DIAGRAM – DVD SECTION (7/10) – • See page 70 for Waveforms. • See page 72 for IC Block Diagrams. IC202 HY57V283220T-6 C217 0.01 C219 0.01 C226 0.01 C234 0.01 C238 0.01 C274 0.01 IC215 SN74ALV CH16841DGGR C239 0.01...

  • Page 54: Schematic Diagram

    HCD-FC8/FC9 7-16. SCHEMATIC DIAGRAM – DVD SECTION (8/10) – • See page 70 for Waveforms. • See page 73, 74, 75 for IC Block Diagrams. IC600 IC601 NJM78M05DL1A -TE1 R600 C603 C600 C601 R687 C608 C605 R681 C602 C607 R608 3.3k...

  • Page 55: Schematic Diagram

    HCD-FC8/FC9 7-17. SCHEMATIC DIAGRAM – DVD SECTION (9/10) – • See page 70 for Waveforms. • See page 76 for IC Block Diagrams. CN900 FB901 FB902 Q908 DTC124EKA R992 C900 -T146 Q903 Q909 2SC2712-GL -TE85L DTC124EKA -T146 Q910 DTC124EKA R900...

  • Page 56: Schematic Diagram

    HCD-FC8/FC9 7-18. SCHEMATIC DIAGRAM – DVD SECTION (10/10) – • See page 70 for Waveforms. IC006 C018 C020 C019 IC004 IC005 C015 C014 C016 C017 IC003 C012 C013 FL003 FB008 FB007 C006 47 16V FL004 C005 FB010 FB009 IC002 FL005...

  • Page 57: Amp Section (Side A)

    HCD-FC8/FC9 7-19. PRINTED WIRING BOARD – AMP SECTION (SIDE A) – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. • Semiconductor Location Ref. No. Location D121 D122 D123 D124 D125 D126 D131 D132 D133 D134...

  • Page 58: Amp Section (Side B)

    HCD-FC8/FC9 7-20. PRINTED WIRING BOARD – AMP SECTION (SIDE B) – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. SPEAKER WOOFER FRONT R CEINTER FRONT L AUDIO REAR R WOOFER REAR L J302 • Semiconductor Location Ref.

  • Page 59: Schematic Diagram

    HCD-FC8/FC9 7-21. SCHEMATIC DIAGRAM – AMP SECTION (1/2) – • See page 70 for Waveforms. • See page 71 for IC Block Diagrams. CN304 CN303 CN301 CN302 CNP301 L901 C991 0.047 R991 L903 R902 Q900 DTC343TK C303 220 10V -T-146...

  • Page 60: Schematic Diagram

    HCD-FC8/FC9 7-22. SCHEMATIC DIAGRAM – AMP SECTION (2/2) – • See page 70 for Waveforms. R384 IC106 CXD9750L IC105 CXD9750L IC104 CXD9750L IC103 CXD9750L C104 C103 C102 IC102 CXD9750L IC101 CXD9750L C106 C105 C101 0.01 0.01 0.01 0.01 0.01 0.01...

  • Page 61: Audio Section

    HCD-FC8/FC9 7-23. PRINTED WIRING BOARD – AUDIO SECTION – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. • Semiconductor Location Ref. No. Location D202 D203 IC202 IC202 Q205 Q206 Q207 Q208 Q220 Q221 Q222 Q223...

  • Page 62: Schematic Diagram

    HCD-FC8/FC9 7-24. SCHEMATIC DIAGRAM – AUDIO SECTION – • See page 70 for Waveforms. • See page 71 for IC Block Diagrams. CN201 R212 C213 0.01 D203 D202 MA111-TX MA111-TX C214 0.01 CN205 CNP205 S826 L205 Q222 C217 2SA1037AK R213...

  • Page 63: Video Section

    HCD-FC8/FC9 7-25. PRINTED WIRING BOARD – VIDEO SECTION – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. • Semiconductor Location Ref. No. Location IC204 IC206 IC206 IC207 IC208 IC209 Q210 IC209 Q214 IC207 AUDIO BOARD...

  • Page 64: Schematic Diagram

    HCD-FC8/FC9 7-26. SCHEMATIC DIAGRAM – VIDEO SECTION – • See page 70 for Waveforms. • See page 81 for IC Block Diagrams. C218 IC206 1000 MM1510 XNRE 6.3V L202 C252 C350 IC204 100p IC TORX179L C248 22 16V L209 IC208...

  • Page 65: Ddcom Section

    HCD-FC8/FC9 7-27. PRINTED WIRING BOARD – DDCOM SECTION – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. IC800 • Semiconductor Location Ref. No. Location D806 D807 D808 D809 D810 D812 IC800 Q803 Q804 BOARD BOARD...

  • Page 66: Control Section

    HCD-FC8/FC9 7-28. PRINTED WIRING BOARD – CONTROL SECTION – • See page 35 for Circuit Boards Location. • : Uses unleaded solder. IC802 IC801 FUNCTION (FLUORESCENT INDICATOR TUBE) BAND DISPLAY SOUND FIELD DDCON BOARD CN815 (Page 65) • Semiconductor Location Ref.

  • Page 67: Schematic Diagram

    HCD-FC8/FC9 7-29. SCHEMATIC DIAGRAM – DDCOM/CONTROL SECTION – • See page 70 for Waveforms. • See page 71, 77 for IC Block Diagrams. D805 D804 D803 D802 D801 SML-020MDT SML-020MDT SML-020MDT SML-020MDT SML-020MDT -T86 -T86 -T86 -T86 S811 S813 S815...

  • Page 68: Power Section

    HCD-FC8/FC9 7-30. PRINTED WIRING BOARD – POWER SECTION – • See page 35 for Circuit Boards Location. BOARD BOARD • Semiconductor CN301 CN008 Location (Page 58) (Page 45) IC902 Ref. No. Location D902 D904 D905 IC909 D906 PC901 D907 D908...

  • Page 69: Power Section

    HCD-FC8/FC9 7-31. SCHEMATIC DIAGRAM – POWER SECTION – • See page 70 for Waveforms. • See page 77, 78, 79 for IC Block Diagrams. LF901 CN900 CN901 C903 CN904 D911 FML-22S T901 C920 2700P L901 IC908 C918 SI-8120JF R919 R920 4.7k...
  • Page 70 HCD-FC8/FC9 • Waveforms — RF Board — — DDCOM Board — — AMP Board — Q803 collector IC001 1 (DVDRFP) IC001 el (TE) IC001 r; (FE) IC001 tj (RFAC) IC304 4 IC301, 302, 303 2 (OUTL1) 4.2 Vp-p 25.2 Vp-p 3.4 Vp-p...

  • Page 71: Ic Block Diagrams

    HCD-FC8/FC9 7-32. IC BLOCK DIAGRAMS – AUDIO BOARD – – AMP BOARD – IC202 MC14052 BDR2 IC305 NJM4580E (TE2) A OUT B OUT A –IN A +IN B –IN V– B +IN – DDCON BOARD – IC800 NJU3713G (TE2) P5 1...

  • Page 72: Dvd Board

    HCD-FC8/FC9 – DVD BOARD – IC203 BR9040F-WE2 IC215 SN74ALVCH16841DGGR 56 1LE COMMAND 4096bit REGISTER EEPROM ARRAY WRITE DISABLE POWER ADDRESS HIGH VOLTAGE SUPPLY DECODER GENERATOR VOLTAGE DETECTOR LATCH COMMAND DECODE DATA CONTROL CLOCK ADDRESS REGISTER GENERATION BUFFER 1D10 1Q10 LATCH...
  • Page 73 HCD-FC8/FC9 IC401 CXD3068Q 60 59 58 55 54 53 52 50 49 48 46 45 44 43 42 41 DVDD2 ASYE TES1 DOUT TEST DVSS1 LRCK PCMD FRDR BCLK FFDR EMPH TRDR TFDR XTSL DVSS2 SRDR XTAI SFDR XTAO DVDD1...
  • Page 74 HCD-FC8/FC9 IC604 IS61LV6416-10TLT ROW/COLUMN DECODER OUTPUT ENABLE BUFFER 64K x 16 BYTE ENABLE MEMORY CHIP ENABLE BUFFER ARRAY BUFFER I/O 15 I/O 0 I/O 14 I/O 1 I/O 13 I/O 2 I/O 12 I/O 3 I/O 11 I/O 4 I/O 10...
  • Page 75 HCD-FC8/FC9 IC608 AK4382AVT-E2 DZFL CLOCK DE–EMPHASIS MCLK DZFR DIVIDER CONTROL ∆∑ AOUTL+ INTERPOLATOR MODULATOR BICK AOUTL– AUDIO SDTI DATA INTERFACE ∆∑ LRCK AOUTR+ INTERPOLATOR MODULATOR AOUTR– µP CCLK INTERFACE CDTI IC706 MSM51V18165F-60TSKR1 40 – 36 34 33 REFRESH INTERNAL TIMING...
  • Page 76 HCD-FC8/FC9 IC808 MSM56V16160F-8TK7R1 35 34 TIMING REGISTER PROGRAMING OUTPUT REGISTER BUFFERS LATENCY INTERNAL INTERNAL COLUMN & COLUMN READ ADDRESS ADDRESS BURST ADDRESS ADDRESS DATA BUFFERS BUFFERS CONTROLLER COUNTOR COUNTOR REGISTER CONTROLLER INPUT DATA SENSE COLUMN REGISTER AMPLIFIER DECODERS BANK INPUT...

  • Page 77: Power Board

    HCD-FC8/FC9 – FL BOARD – IC802 MSM9202-05GS-KDR1 Timing Timing Generator 2 Generator 1 64 VDD Duty Control 63 DAT Digit 8bit Control Shift 62 CLK Register 61 CS Port Control Driver Circuit 60 RST Command Decoder 59 OSC1 Read Write...
  • Page 78 HCD-FC8/FC9 IC903 SI-8050S-LF1101 OVER REGULATOR CURRENT PROTECTOR LATCH RESET & DRIVER OVER HEAT – PROTECTOR COMPARATOR – VREF ERROR AMP IC904 M51945BL –...

  • Page 79: Relay Board

    HCD-FC8/FC9 IC906 SI-8033JF IC908 SI-8120JF OVER OVER CURRENT REGULATOR REGULATOR CURRENT PROTECTOR PROTECTOR LATCH LATCH RESET RESET & & ON/OFF ON/OFF DRIVER DRIVER SOFT SOFT COMPARATOR COMPARATOR START START OVER HEAT OVER HEAT – – PROTECTOR PROTECTOR – – VREF...
  • Page 80 HCD-FC8/FC9 – RF BOARD – IC001 CXD1881AR 64 63 62 61 60 59 55 54 53 52 FAST ATTACK INPUT OUTPUT HOLD FULL WAVE AGC CHARGE INHIBIT RECTIFER PUMP PROGRAMMABLE FROM S-PORT EQUALIZER INPUT DVDRFP FILTER BIAS DVDRFN DIFFERENTIATOR INPUT...

  • Page 81: Video Board

    HCD-FC8/FC9 – VIDEO BOARD – IC206 MM1510XNRE IC207 NJM2235V (TE2) 6 SW OUT2 IN 1 BUFFER OUT1 DRIVER 5 GND SW 1 IN 2 CLAMP BIAS BIAS SW 2 VIN 3 IC208 MM1568AJBE VCC1 VCC2 BIAS 75Ω COUT DRIVER MUTE1...

  • Page 82: Ic Pin Function Description

    HCD-FC8/FC9 7-33. IC PIN FUNCTION DESCRIPTION • DVD BOARD IC206 ZIVA5X-C1F (DVD SYSTEM PROCESSOR) Pin No. Pin Name Description VDDP — Power supply terminal (+3.3V) (I/O signal) Address bus HD15 Data bus (address signal multiplexed) HD14 Data bus (address signal multiplexed)
  • Page 83 HCD-FC8/FC9 Pin No. Pin Name Description MRAS SDRAM row address strobe signal output MCAS SDRAM column address strobe signal output SDRAM write enable signal output (“H” : read, “L” : write) GND25 — Ground terminal (SDRAM I/O signal) VDD25 —...
  • Page 84 HCD-FC8/FC9 Pin No. Pin Name Description MD30 SDRAM data MD31 SDRAM data GND25 — Ground terminal (SDRAM I/O signal) VDD25 — Power supply terminal (+3.3V) (SDRAM I/O signal) VCLK System clock (not used) I2C_CTRL — Not used S1 signal output...
  • Page 85 HCD-FC8/FC9 Pin No. Pin Name Description GPIO4 (2) — Not used (pull-up) VDDP — Power supply terminal (+3.3V) (I/O signal) GNDP — Ground terminal (I/O signal) GPIO4 (3) — Not used (pull-down) GPIO4 (4) — Not used (pull-down) IEC958 S/PDIF signal...
  • Page 86 HCD-FC8/FC9 Pin No. Pin Name Description TCK signal input RESET ZIVA reset input BUS CLK Not used — Ground terminal (inside core) — Power supply terminal (+1.8V) (inside core) Address bus 3 Address bus 2 GNDP — Ground terminal (I/O signal)
  • Page 87 HCD-FC8/FC9 • DVD BOARD IC301 CXP973064-228R (MACHANISH CONTROLLER) Pin No. Pin Name Description EEP SO Not used SDEN Serial data enable signal output to DVD/CD RF amplifier DOCTRL/ Digital out on/off control signal output to the digital signal processor ISBTEST “L”: digital out off, “H”: digital out on...
  • Page 88 HCD-FC8/FC9 Pin No. Pin Name Description SQSO Subcode Q data input from the digital signal processor MUTE DSD Muting on/off control signal output to the DSD decoder “H”: muting on SQCK Subcode Q data reading clock signal output to the digital signal processor —...
  • Page 89 HCD-FC8/FC9 • DVD BOARD IC401 CXD3068Q (DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description DVDD0 — Power supply terminal (+3.3V) (digital system) XRST Reset signal input from the mechanism controller “L”: reset MUTE Muting on/off control signal input from the mechanism controller “H”: muting on...
  • Page 90 HCD-FC8/FC9 Pin No. Pin Name Description AVDD0 — Power supply terminal (+3.3V) (analog system) ASYO EFM full-swing output terminal ASYI Asymmetry comparator voltage input terminal RFAC EFM signal input from the DVD/CD RF amplifier AVSS1 — Ground terminal (analog system)
  • Page 91 HCD-FC8/FC9 • DVD BOARD IC607 CXD9617R (AUDIO DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description — Ground terminal XRST Reset signal input from the system controller “L”: reset EXTIN Master clock signal input terminal Not used Sampling frequency selection signal input terminal Not used VDDI —...
  • Page 92 HCD-FC8/FC9 Pin No. Pin Name Description VDDE — Power supply terminal (+3.3V) WMD1 S-RAM wait mode setting terminal Fixed at “H” in this set — Ground terminal WMD0 S-RAM wait mode setting terminal Fixed at “H ” in this set...
  • Page 93 HCD-FC8/FC9 Pin No. Pin Name Description SDI3 Rear L-ch and R-ch audio serial data input from the digital audio processor SDI4 Audio serial data input terminal Not used Synchronous/asychronous selection signal input terminal SYNC “L”: Synchronous, “H”: asynchronous (fixed at “H” in this set) 117 to 119 —...
  • Page 94 HCD-FC8/FC9 • DVD BOARD IC701 TMC57929PGF-RDP (DVD DECODER) Pin No. Pin Name Description 1, 2 D5, D6 Two-way data bus with the mechanism controller — Ground terminal (digital system) Two-way data bus with the mechanism controller Address signal input from the mechanism controller —...
  • Page 95 HCD-FC8/FC9 Pin No. Pin Name Description DVD mode: Serial data request signal input from the DVD system processor XHAC SACD mode: Serial data request signal input from the DSD decoder HINT Not used XS16 Not used Not used XPDI Not used VDDS —...
  • Page 96 HCD-FC8/FC9 Pin No. Pin Name Description RFDCC Input terminal for adjusting DC cut high-pass filter for RF signal Not used RFIN RF signal input from the DVD/CD RF amplifier 118, 119 VCCA5, VCCA4 — Power supply terminal (+3.3V) (analog system) VCOR1 —...
  • Page 97 HCD-FC8/FC9 Pin No. Pin Name Description XTAL 33.8688 MHz clock signal input terminal — Ground terminal (digital system) XTL2 System clock output terminal (33.8688 MHz) XTL1 System clock input terminal (33.8688 MHz) — Power supply terminal (+3.3V) (digital system) 172 to 176...
  • Page 98 HCD-FC8/FC9 • DVD BOARD IC801 CXD2753R (DSD DECODER) Pin No. Pin Name Description VSCA0 — Ground terminal (for core) XMSLAT Serial data latch pulse signal input from the mechanism controller MSCK Serial data transfer clock signal input from the mechanism controller...
  • Page 99 HCD-FC8/FC9 Pin No. Pin Name Description PHREFI Bit clock signal (2.8224 MHz) input terminal for DSD data output Not used PHREFO Bit clock signal (2.8224 MHz) output to the digital audio processor Not used ZDFL Front L-ch Zero data flag detection signal output terminal Not used...
  • Page 100 HCD-FC8/FC9 Pin No. Pin Name Description WRFD Not used Operation clock signal input for PSP physical disc mark detection from the DVD decoder WAVDD0, 124, 125 — A/D power supply terminal (+2.5V) (for PSP physical disc mark detection) WAVDD1 WARFI...
  • Page 101 HCD-FC8/FC9 • DVD BOARD IC901 µPD703033BYGF-M28-3BA-A (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP-DATA Serial data output to the stream processors DAMP-CLK Serial data transfer clock signal output to the stream processors I2C-DATA Communication data bus with the DVD system processor and mechanism controller CQ-RST Reset signal output to the DVD system processor “L”: reset...
  • Page 102 HCD-FC8/FC9 Pin No. Pin Name Description DIP-RST Reset signal output to the power drivers “L”: reset DIP-OCP Protect signal input from the over load detection circuit ST-POWER System power on/off control signal output “H”: power on HP-MUTE Headphone muting on/off control signal output “L”: muting on AU-MUTE Audio line muting on/off control signal output “L”: muting on...
  • Page 103 HCD-FC8/FC9 Description Pin No. Pin Name DVD-POWER DVD power on/off control signal output “H”: power on STOP System power stop signal input POWER-SW AC power detection signal input SIRCS Remote control signal input System wake up signal input by pressing any key on the front panel or remote commander or...
  • Page 104 HCD-FC8/FC9 • DVD BOARD IC902 PT8300R-TP (CHANGER CONTROLLER (MOTOR, SWITCH)) Pin No. Pin Name Description — Ground terminal RESET-B Reset signal input from the system controller “L”: reset Serial data transfer clock signal input from the system controller LATCH Serial data latch pulse signal input from the system controller Disc insert (8/12cm) detect switch input terminal “L”: disc insert Not used...
  • Page 105 HCD-FC8/FC9 • DVD BOARD IC906 PT8300R-TP (CHANGER CONTROLLER (ROTARY ENCODER)) Pin No. Pin Name Description — Ground terminal RESET-B Reset signal input from the system controller “L”: reset Serial data transfer clock signal input from the changer controller (motor, switch)

  • Page 106: Exploded Views

    HCD-FC8/FC9 SECTION 8 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • -XX, -X mean standardized parts, so they may The components identified by mark 0 or number in the exploded views are not supplied. have some difference from the original one.

  • Page 107: Front Panel Section

    HCD-FC8/FC9 8-2. FRONT PANEL SECTION not supplied not supplied not supplied not supplied not supplied FL801 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-248-518-01 FRONT (AL) PANEL 4-248-528-01 BAND BUTTON 4-248-530-01 FRONT (ML) PANEL...

  • Page 108: Chassis Section-1

    HCD-FC8/FC9 8-3. CHASSIS SECTION-1 not supplied not supplied F901 not supplied not supplied supplied not supplied not supplied not supplied not supplied not supplied not supplied chassis section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark...

  • Page 109: Chassis Section-2

    HCD-FC8/FC9 8-4. CHASSIS SECTION-2 mechanism deck section-1 (CDM69-DVBU16) not supplied not supplied not supplied not supplied chassis section-3 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-248-531-01 MD COVER 4-249-991-01 FOOT A-4747-619-A LF BOARD, COMPLETE...

  • Page 110: Chassis Section-3

    HCD-FC8/FC9 8-5. CHASSIS SECTION-3 not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-500-657-11 CORE, FERRIET 4-217-350-11 STOPPER, CORD...

  • Page 111: Mechanism Deck Section-1

    HCD-FC8/FC9 8-6. MECHANISM DECK SECTION-1 (CDM69-DVBU16) S702 M761 mechanism deck section-2 (CDM69-DVBU16) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-685-006-11 STOCKER MOTOR BOARD 4-239-689-01 GEAR (STOCKER DECELERATION) 4-951-620-01 SCREW (2.6X8), +BVTP 4-239-698-01 PULLEY (STOCKER) 4-239-690-01 CAM (STOCKER U/D)

  • Page 112: (Cdm69-Dvbu16)

    HCD-FC8/FC9 8-7. MECHANISM DECK SECTION-2 (CDM69-DVBU16) mechanism deck section-3 (CDM69-DVBU16) mechanism deck section-4 (CDM69-DVBU16) base unit section (DVBU16) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-685-008-11 SW (1) BOARD 4-951-620-01 SCREW (2.6X8), +BVTP 1-685-009-11 SW (2) BOARD 4-985-672-01 SCREW (+PTPWHM 2.6), FLOATING...

  • Page 113: Mechanism Deck Section-3

    HCD-FC8/FC9 8-8. MECHANISM DECK SECTION-3 (CDM69-DVBU16) not supplied supplied not supplied supplied supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-240-038-01 PULLEY (A), CHUCKING 4-239-651-01 ROLLER (STOCKER), RUBBER 4-992-069-01 SCREW (+PTPWH)(M2)(DIA. 7)

  • Page 114: Mechanism Deck Section-4

    HCD-FC8/FC9 8-9. MECHANISM DECK SECTION-4 (CDM69-DVBU16) supplied not supplied M781 mechanism deck section-5 (CDM69-DVBU16) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-4954-626-1 LEVER (ROLLER) ASSY 4-240-981-01 SPRING (BASE SLIDER 5),TENSION 4-239-666-01 GEAR 4-240-041-01 SPRING (SLIDER 2), TENSION 4-239-668-01 LEVER (CENTER) 4-951-620-01 SCREW (2.6X8), +BVTP...

  • Page 115: Mechanism Deck Section-5

    HCD-FC8/FC9 8-10. MECHANISM DECK SECTION-5 (CDM69-DVBU16) mechanism deck section-6 (CDM69-DVBU16) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-240-020-01 GEAR (TIMING) 4-239-699-01 PULLEY 4-239-708-01 BELT (FRONT), TIMING 4-239-681-01 BELT (ROLLER) 4-239-697-01 GEAR (CENTER) 4-227-899-01 SCREW (DIA. 12), FROATING...

  • Page 116: Mechanism Deck Section-6

    HCD-FC8/FC9 8-11. MECHANISM DECK SECTION-6 (CDM69-DVBU16) not supplied not supplied M771 S771 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-239-693-01 CAM (GEAR) 4-951-620-01 SCREW (2.6X8), +BVTP 1-685-004-11 SENSOR BOARD 4-239-692-01 CAM (BU U/D) 4-239-696-01 GEAR (EJECT LOCK)

  • Page 117: Base Unit Section (Dvbu16)

    HCD-FC8/FC9 8-12. BASE UNIT SECTION (DVBU16) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-981-923-01 SCREW (M), STEP 1-685-250-11 FLEXIBLE BOARD 3-053-847-31 INSULATOR 4-239-703-01 HOLDER (DBU1) 0 603 1-477-263-11 OPTICAL PICK-UP (TDP022W) 7-685-533-14 SCREW +BTP 2.6X6 TYPE2 N-S...

  • Page 118: Electrical Parts List

    HCD-FC8/FC9 SECTION 9 ELECTRICAL PARTS LIST Note: • CAPACITORS • Due to standardization, replacements in the parts When indicating parts by reference number, uF : µ F list may be different from the parts specified in the please include the board name.
  • Page 119 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C225 1-115-339-11 CERAMIC CHIP 0.1uF 10.00% 50V C350 1-115-339-11 CERAMIC CHIP 0.1uF 10.00% 50V C226 1-115-339-11 CERAMIC CHIP 0.1uF 10.00% 50V C231 1-164-505-11 CERAMIC CHIP 2.2uF C356...
  • Page 120 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D124 6-500-131-01 DIODE LI116 L106 1-456-035-11 INDUCTOR 10uH D125 6-500-131-01 DIODE LI116 L302 1-412-939-11 INDUCTOR D126 6-500-131-01 DIODE LI116 L305 1-414-398-11 INDUCTOR 10uH D131 6-500-131-01 DIODE LI116...
  • Page 121 HCD-FC8/FC9 AUDIO Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R318 1-216-821-11 METAL CHIP 1/16W R375 1-216-845-11 METAL CHIP 100K 1/16W R319 1-216-825-11 METAL CHIP 2.2K 1/16W R376 1-216-833-11 METAL CHIP 1/16W R320 1-216-821-11 METAL CHIP...
  • Page 122 HCD-FC8/FC9 AUDIO DDCON Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C608 1-162-969-11 CERAMIC CHIP 0.0068uF 10% R224 1-216-809-11 METAL CHIP 1/16W C609 1-162-969-11 CERAMIC CHIP 0.0068uF 10% R225 1-216-839-11 METAL CHIP 1/16W R226 1-216-839-11 METAL CHIP 1/16W <...
  • Page 123 HCD-FC8/FC9 DDCON Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > R855 1-216-809-11 METAL CHIP 1/16W R860 1-216-815-11 METAL CHIP 1/16W CN814 1-779-554-21 CONNECTOR, FFC (LIF (NON-ZIF)) 17P CN815 1-779-281-11 CONNECTOR, FFC (LIF (NON-ZIF)) 13P...
  • Page 124 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C235 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C401 1-125-777-11 CERAMIC CHIP 0.1uF 10.00% 10V C402 1-117-370-11 CERAMIC CHIP 10uF C236 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C403 1-164-505-11 CERAMIC CHIP 2.2uF...
  • Page 125 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C607 1-107-820-11 CERAMIC CHIP 0.1uF C665 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C608 1-107-820-11 CERAMIC CHIP 0.1uF C666 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C667 1-117-370-11 CERAMIC CHIP...
  • Page 126 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C774 1-164-941-11 CERAMIC CHIP 0.0047uF 10.00% 16V C913 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C775 1-107-820-11 CERAMIC CHIP 0.1uF C914 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C916 1-107-820-11 CERAMIC CHIP 0.1uF...
  • Page 127 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks FL006 1-234-177-21 FERRITE IC706 8-759-564-30 IC MSM51V18165F-60TSKR1 FL202 1-234-177-21 FERRITE IC801 8-752-416-77 IC CXD2753R IC802 8-759-058-64 IC TC7S32FU (TE85R) FL203 1-234-177-21 FERRITE IC803 6-702-563-01 IC TC7W74FK-TE85L FL204...
  • Page 128 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R016 1-218-990-11 SHORT CHIP R207 1-218-285-11 METAL CHIP 1/10W R017 1-218-990-11 SHORT CHIP R018 1-218-990-11 SHORT CHIP R208 1-218-285-11 METAL CHIP 1/10W R019 1-218-957-11 RES-CHIP 2.2K 1/16W...
  • Page 129 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R266 1-218-285-11 METAL CHIP 1/10W R363 1-218-965-11 RES-CHIP 1/16W R267 1-218-990-11 SHORT CHIP R268 1-218-990-11 SHORT CHIP R364 1-218-961-11 RES-CHIP 4.7K 1/16W R269 1-218-990-11 SHORT CHIP R401...
  • Page 130 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R512 1-218-974-11 METAL CHIP 0.5% 1/16W R623 1-218-941-81 RES-CHIP 1/16W R513 1-218-974-11 METAL CHIP 0.5% 1/16W R514 1-218-965-11 RES-CHIP 1/16W R624 1-218-941-81 RES-CHIP 1/16W R516 1-218-961-11 RES-CHIP 4.7K...
  • Page 131 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R696 1-218-945-11 RES-CHIP 1/16W R770 1-218-990-11 SHORT CHIP R698 1-218-965-11 RES-CHIP 1/16W R699 1-218-941-81 RES-CHIP 1/16W R771 1-218-957-11 RES-CHIP 2.2K 1/16W R702 1-218-965-11 RES-CHIP 1/16W R772 1-218-933-11 RES-CHIP...
  • Page 132 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R901 1-218-941-81 RES-CHIP 1/16W R959 1-218-953-11 RES-CHIP 1/16W R902 1-218-941-81 RES-CHIP 1/16W R960 1-218-965-11 RES-CHIP 1/16W R903 1-218-941-81 RES-CHIP 1/16W R904 1-218-941-81 RES-CHIP 1/16W R961 1-218-965-11 RES-CHIP...
  • Page 133 HCD-FC8/FC9 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C818 1-162-923-11 CERAMIC CHIP 47PF < TRANSISTOR > C819 1-164-360-11 CERAMIC CHIP 0.1uF Q900 8-729-920-31 TRANSISTOR DTC343TK-T-146 < CONNECTOR > Q901 8-729-920-31 TRANSISTOR DTC343TK-T-146 CN816 1-779-550-21 CONNECTOR, FFC (LIF (NON-ZIF))13P <...
  • Page 134 HCD-FC8/FC9 MODE MOTOR POWER Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < RESISTOR > C935 1-128-950-21 ELECT 1000uF C936 1-165-319-11 CERAMIC CHIP 0.1uF R804 1-216-817-11 METAL CHIP 1/16W C937 1-165-176-11 CERAMIC CHIP 0.047uF 10.00% 16V 0 C938 <...
  • Page 135 HCD-FC8/FC9 POWER RELAY Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < COIL > R922 1-218-866-11 METAL CHIP 6.2K 1/10W R923 1-216-833-11 METAL CHIP 1/16W L901 1-424-860-11 INDUCTOR 10uH R924 1-216-818-11 METAL CHIP 1/16W L902 1-456-183-11 INDUCTOR...
  • Page 136 HCD-FC8/FC9 RELAY Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > C023 1-162-919-11 CERAMIC CHIP 22PF C024 1-162-970-11 CERAMIC CHIP 0.01uF CN701 1-779-565-21 CONNECTOR, FFC (LIF (NON-ZIF)) 28P C025 1-107-826-11 CERAMIC CHIP 0.1uF CN702...
  • Page 137 HCD-FC8/FC9 ROLLER MOTOR S-VIDEO SELECTOR SENSOR STOCKER MOTOR SW (1) SW (2) SW (3) SW (4) VIDEO Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R016 1-216-864-11 METAL CHIP 1/10W 1-685-004-11 SENSOR BOARD ************** R017 1-216-864-11 METAL CHIP...
  • Page 138 HCD-FC8/FC9 VIDEO Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C282 1-164-156-11 CERAMIC CHIP 0.1uF MISCELLANEOUS C283 1-126-160-11 ELECT ************** C284 1-124-584-00 ELECT 100uF 1-500-657-11 CORE, FERRIET C285 1-164-156-11 CERAMIC CHIP 0.1uF 1-500-657-11 CORE, FERRIET C286 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 139 HCD-FC8/FC9 MEMO...
  • Page 140 HCD-FC8/FC9 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...

This manual is also suitable for:

Hcd-fc9

Table of Contents