Configuring The Switch For Vendor-Proprietary Radius Server Communication - Cisco Catalyst 2950 Software Configuration Manual
Hide thumbs
Also See for Catalyst 2950:
- Configuration manual (710 pages) ,
- Command reference manual (686 pages) ,
- Software configuration manual (674 pages)
Table of Contents
Advertisement
Chapter 7
Administering the Switch
For example, this AV pair activates Cisco's multiple named ip address pools feature during IP
authorization (during PPP's IPCP address assignment):
cisco-avpair= "ip:addr-pool=first"
This example shows how to provide a user logging in from a switch with immediate access to privileged
EXEC commands:
cisco-avpair= "shell:priv-lvl=15"
Other vendors have their own unique vendor-IDs, options, and associated VSAs. For more information
about vendor-IDs and VSAs, refer to RFC 2138, "Remote Authentication Dial-In User Service
(RADIUS)."
Beginning in privileged EXEC mode, follow these steps to configure the switch to recognize and use
VSAs:
Command
Step 1
configure terminal
Step 2
radius-server vsa send [accounting |
authentication]
Step 3
end
Step 4
show running-config
Step 5
copy running-config startup-config
For a complete list of RADIUS attributes or more information about vendor-specific attribute 26, refer
to the "RADIUS Attributes" appendix in the Cisco IOS Security Configuration Guide for Release 12.1.
Configuring the Switch for Vendor-Proprietary RADIUS Server Communication
Although an IETF draft standard for RADIUS specifies a method for communicating vendor-proprietary
information between the switch and the RADIUS server, some vendors have extended the RADIUS
attribute set in a unique way. Cisco IOS software supports a subset of vendor-proprietary RADIUS
attributes.
As mentioned earlier, to configure RADIUS (whether vendor-proprietary or IETF draft-compliant), you
must specify the host running the RADIUS server daemon and the secret text string it shares with the
switch. You specify the RADIUS host and secret text string by using the radius-server global
configuration commands.
78-11380-04
Purpose
Enter global configuration mode.
Enable the switch to recognize and use VSAs as defined by RADIUS IETF
attribute 26.
(Optional) Use the accounting keyword to limit the set of recognized
•
vendor-specific attributes to only accounting attributes.
(Optional) Use the authentication keyword to limit the set of
•
recognized vendor-specific attributes to only authentication attributes.
If you enter this command without keywords, both accounting and
authentication vendor-specific attributes are used.
Return to privileged EXEC mode.
Verify your settings.
(Optional) Save your entries in the configuration file.
Catalyst 2950 Desktop Switch Software Configuration Guide
Controlling Switch Access with RADIUS
7-29
Advertisement
Table of Contents
Troubleshooting
