Configuring The Switch To Use Vendor-Specific Radius Attributes; Configuring The Switch For Vendor-Proprietary Radius Server Communication - Cisco Catalyst 2960-XR Security Configuration Manual
Ios release 15.0 2 ex1
Hide thumbs
Also See for Catalyst 2960-XR:
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring RADIUS
Configuring the Switch to Use Vendor-Specific RADIUS Attributes
Beginning in privileged EXEC mode, follow these steps to configure the switch to use vendor-specific RADIUS
attributes:
SUMMARY STEPS
1. configure terminal
2. radius-server vsa send [accounting | authentication]
3. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
radius-server vsa send [accounting |
authentication]
Example:
Switch(config)# radius-server vsa
send
Step 3
end
Example:
Switch(config)# end
Related Topics
Vendor-Specific RADIUS Attributes, on page 64
Configuring the Switch for Vendor-Proprietary RADIUS Server Communication
Beginning in privileged EXEC mode, follow these steps to configure the switch to use vendor-proprietary
RADIUS server communication:
OL-29434-01
Configuring the Switch to Use Vendor-Specific RADIUS Attributes
Purpose
Enters the global configuration mode.
Enables the switch to recognize and use VSAs as defined by RADIUS
IETF attribute 26.
• (Optional) Use the accounting keyword to limit the set of recognized
vendor-specific attributes to only accounting attributes.
• (Optional) Use the authentication keyword to limit the set of
recognized vendor-specific attributes to only authentication attributes.
If you enter this command without keywords, both accounting and
authentication vendor-specific attributes are used.
Returns to privileged EXEC mode.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
75
Hide quick links:
Advertisement
Table of Contents
