Cisco Catalyst 2960-XR Security Configuration Manual page 159
Ios release 15.0 2 ex1
Hide thumbs
Also See for Catalyst 2960-XR:
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages) ,
- Reference (52 pages)
Table of Contents
Advertisement
Configuring IPv4 ACLs
SUMMARY STEPS
1. configure terminal
2. vlan access-map name [number]
3. match {ip | mac} address {name | number} [name | number]
4. action {drop | forward}
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
vlan access-map name [number]
Example:
Switch(config)# vlan access-map map_1
20
Step 3
match {ip | mac} address {name | number}
[name | number]
Example:
Switch(config-access-map)# match ip
address ip2
Step 4
action {drop | forward}
Example:
Switch(config-access-map)# action
forward
OL-29434-01
Purpose
Enters global configuration mode.
Creates a VLAN map, and give it a name and (optionally) a number. The
number is the sequence number of the entry within the map.
When you create VLAN maps with the same name, numbers are assigned
sequentially in increments of 10. When modifying or deleting maps, you
can enter the number of the map entry that you want to modify or delete.
VLAN maps do not use the specific permit or deny keywords. To deny
a packet by using VLAN maps, create an ACL that would match the
packet, and set the action to drop. A permit in the ACL counts as a match.
A deny in the ACL means no match.
Entering this command changes to access-map configuration mode.
Match the packet (using either the IP or MAC address) against one or
more standard or extended access lists. Note that packets are only matched
against access lists of the correct protocol type. IP packets are matched
against standard or extended IP access lists. Non-IP packets are only
matched against named MAC extended access lists.
(Optional) Sets the action for the map entry. The default is to forward.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
Creating a VLAN Map
137
Hide quick links:
Advertisement
Table of Contents
