Table of Contents
Advertisement
VPN
Client to Gateway
Client to Gateway
Cisco RV320/RV325 Administration Guide
•
Split DNS—Sends some of the DNS requests to one DNS server and other
DNS requests to another DNS server, based on specified domain names.
When the router receives an address resolution request from client, it
inspects the domain name. If it matches one of the domain names in the
Split DNS settings, it passes the request to the specified DNS server.
Otherwise, the request is passed to the DNS server that is specified in the
WAN interface settings.
DNS Server 1 and DNS Server 2—IP address of the DNS server to use for
the specified domains. Optionally, specify a secondary DNS server in the
DNS Server 2 field.
Domain Name 1 through Domain Name 4—Specify the domain names for
the DNS servers. Requests for these domains are passed to the specified
DNS server(s).
This feature creates a new VPN tunnel to allow teleworkers and business travelers
to access your network by using third-party VPN client software, such as
TheGreenBow.
Configure a VPN tunnel for one remote user, a group VPN for multiple remote
users, or Easy VPN:
•
Tunnel—Creates a tunnel for a single remote user. The tunnel number is
automatically generated.
•
Group VPN—Creates a tunnel for a group of users, eliminating the need to
configure individual users. All of the remote users can use the same
Preshared Key to connect to the device, up to the maximum number of
supported tunnels. The router supports up to two VPN groups. The group
number is automatically generated.
•
Easy VPN—Allows remote users to connect this device by using Cisco VPN
Client (also known as Cisco Easy VPN Client) utility (available on
software.cisco.com/download/
navigator.html?mdfid=270636499&flowid=4466, VPN Client v5.x or VPN
Client v4.x):
-
Version 5.0.07 supports Windows 7 (32-bit and 64-bit), Windows Vista
(32-bit and 64-bit), and Windows XP (32-bit)
8
https://
91
Hide quick links:
Advertisement
Table of Contents
