Table of Contents
Advertisement
Using the DHCT
Connecting the DHCT
After you connect the DHCT and any additional
electronic devices in your system, follow these steps:
1. Verify that the DHCT is connected to the 75 Ω
coaxial cable coming from the wall.
2. Plug the DHCT and other devices into your AC
power source.
Important: Do not press the Power key on the
DHCT.
3. Turn on the power to your TV and VCR, and tune
your TV and VCR to the input channel assigned by
your cable service provider (channel 3 or 4).
4. Wait for the time to display on the LED.
5. Press the Power key on the DHCT.
6. Program your remote control to operate your TV
and VCR. (For instructions see your remote control
user's guide.)
28
Operating the DHCT
Choose one of the following options to operate the
DHCT:
• Press the Power key on the front panel of the
DHCT.
• Use your remote control keys. (Refer to your remote
control user's guide for instructions on which key or
combination of keys to press.)
Control the volume, select channels, select on-screen
functions, and change settings using the keys on the
front panel of the DHCT or the remote control keys.
Using the IPG, Remote Control, and
VCR Commander Module
Read the users' guides that your cable service
provider included with the DHCT installation package.
These guides provide the set-up and operating
instructions for the IPG (on-screen menu), your
remote control, and the VCR Commander Module (if
available).
Advertisement
Table of Contents
