Table of Contents
Advertisement
Getting Started
Installation Overview
The following list provides an overview of the
installation process.
1. Determine the electronic devices you must connect
using the information on page 9.
2. Connect the DHCT and your electronic devices
using the diagrams in this guide, based upon the
information on page 9.
3. Plug in the DHCT to an AC power source, but do
not press the Power key on the DHCT.
4. Set the input channel (3 or 4) on your TV and VCR.
5. Wait for the time to display on the front-panel
display. Then, press the Power on the DHCT. See
page 28 for detailed instructions.
6. Program your remote control to operate your TV
and VCR. (See your remote control user's guide.)
7. Use the IPG to browse and view your program
preferences. (See the IPG user's guide.)
8
Installation Tips
Follow these tips for proper DHCT operation:
• Do not plug the DHCT into a wall outlet that is
controlled by a wall switch. The IPG data does
not update when the outlet is switched to the off
position.
• You can plug your TV into the AC Switched Outlet
on the back of the DHCT.
• To ensure proper ventilation, do not place any
objects on top of the DHCT, including devices such
as your TV.
• If your TV is equipped with a picture-in-picture (PIP)
feature, see the connection diagram on page 13.
Advertisement
Table of Contents
