Enabling And Disabling Public Secure Packet Forwarding - Cisco Aironet 1100 Series Installation And Configuration Manual
Hide thumbs
Also See for Aironet 1100 Series:
- Hardware installation manual (116 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Chapter 7
Configuring Radio Settings
A Cisco Aironet Workgroup Bridge provides a wireless LAN connection for up to eight
Ethernet-enabled devices.
Beginning in privileged EXEC mode, follow these steps to configure the encapsulation transformation
method:
Command
Step 1
configure terminal
Step 2
interface dot11radio 0
Step 3
Step 4
end
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.
Use the no form of the command to disable reliable multicast messages to workgroup bridges.
Enabling and Disabling Public Secure Packet Forwarding
Public Secure Packet Forwarding (PSPF) prevents client devices associated to an access point from
inadvertently sharing files with other client devices on the wireless network. It provides Internet access
to client devices without providing other capabilities of a LAN. With PSPF enabled, client devices
cannot communicate with other client devices on the wireless network. This feature is useful for public
wireless networks like those installed in airports or on college campuses.
To enable and disable PSPF using IOS commands, you use bridge groups. You can find a detailed
explanation of bridge groups and instructions for implementing them in this document:
•
You can also enable and disable PSPF using the web-browser interface. The PSPF setting is on the
Radio-802.11b Settings page.
PSPF is disabled by default. Beginning in privileged EXEC mode, follow these steps to enable PSPF:
Command
Step 1
configure terminal
Step 2
interface dot11radio 0
Step 3
bridge-group group port-protected Enable PSPF.
Step 4
end
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.
Use the no form of the command to disable PSPF.
OL-2851-01
Cisco IOS Bridging and IBM Networking Configuration Guide, Release 12.2. Click this link to
browse to the Configuring Transparent Bridging chapter:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart1/bcftb.
htm
Enabling and Disabling Public Secure Packet Forwarding
Purpose
Enter global configuration mode.
Enter interface configuration mode for the radio interface.
Enable reliable multicast messages to workgroup bridges.
Return to privileged EXEC mode.
Purpose
Enter global configuration mode.
Enter interface configuration mode for the radio interface.
Return to privileged EXEC mode.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
7-11
Hide quick links:
Advertisement
Table of Contents
