hit counter script
Cisco Aironet 1400 Series Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Aironet 1400 Series
  6. Manual
Cisco Aironet 1400 Series Manual

Cisco Aironet 1400 Series Manual

Wireless bridge
Hide thumbs Also See for Aironet 1400 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco One-Year Limited Hardware
Warranty Terms
There are special terms applicable to your hardware warranty and various
services that you can use during the warranty period. Your formal Warranty
Statement, including the warranty applicable to Cisco software, is available
on Cisco.com.Follow these steps to access and download the Cisco
Information Packet and your warranty document from Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To read the Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that
the part number 78-5235-02F0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
The Cisco Limited Warranty and Software License page from the
Information Packet appears.
d. Read the document online, or click the PDF icon to download and
print the document in Adobe Portable Document Format (PDF).
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco Aironet 1400 Series

Summary of Contents for Cisco Aironet 1400 Series

  • Page 1 There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranty applicable to Cisco software, is available on Cisco.com.Follow these steps to access and download the Cisco Information Packet and your warranty document from Cisco.com.
  • Page 2 The Cisco warranty page appears. d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). You can also contact the Cisco service and support website for assistance: http://www.cisco.com/public/Support_root.shtml. Duration of Hardware Warranty...
  • Page 3 Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

  • Page 4: Related Documents

    Preface This guide is designed to make you familiar with the Cisco Aironet 1400 Series Wireless Bridge. The guide identifies the major components of the bridge and describes their functions within the bridge system. Installation and configuration processes are also discussed in fundamental terms.
  • Page 5 2. Click Products and Services. A Products and Services window appears. 3. Click Wireless LAN Products. The Cisco Wireless LAN Products page appears. 4. Click Cisco Aironet 1400 Series. The Cisco Aironet 1400 Series page appears. 5. In the left-hand frame, click Instructions and Guides. A list of instructions and guides for the bridge appears.
  • Page 6 Introduction to the Wireless Bridge The Cisco Aironet 1400 Series Wireless Bridge is a high-performance outdoor-deployable wireless bridge that provides wireless connectivity between multiple network locations within a metro area with a low total cost of ownership. The bridge operates in the unlicensed UNII-3 frequency band (5725 to 5825 MHz) and provides high-speed data transfer rates of 6 to 54 Mbps.
  • Page 7 The following illustration shows the two configurations: Integrated antenna configuration 2 External antenna configuration The bridge system includes these major components: • Bridge • Bridge Power Injector LR • Power module • Grounding block • Multi-function mount...

  • Page 8: Network Configurations

    Network Configurations The following sections describe the bridge’s role in three common network configurations: point-to-point, point-to-multipoint, and port aggregation or redundancy. Point-to-Point Configuration In a point-to-point configuration, two bridges connect two LAN networks together using a wireless communication link. The following illustration shows a typical point-to-point configuration.

  • Page 9: Port Aggregation Or Redundancy Configuration

    Bridge Bridge Bridge Port Aggregation or Redundancy Configuration The port aggregation or redundancy configuration increases bandwidth or backup redundancy communications between two LANs. Port aggregation for increased bandwidth occurs when both wireless links simultaneously pass Ethernet traffic. Backup communication redundancy is achieved when the second wireless bridge link is used if the first link fails.
  • Page 10 The Bridge The bridge is typically installed outdoors and provides all IOS software and radio functionality. The following illustration shows the bridge and identifies its interfaces. Mounting bracket RSSI voltage port Status and RSSI LEDs 4 Power Injector LR coax interfaces...
  • Page 11 Bridge Power Injector LR The bridge Power Injector LR delivers 48-VDC power to the bridge. It also serves as an Ethernet repeater between the internal LAN and bridge and provides surge protection for any charge that might build up on the Ethernet cable inner conductor.

  • Page 12: Power Module

    Two lengths of dual 75Ω coaxial cable are provided: 20 ft (6.1 m) and 50 ft (15.2 m). These cables connect the Power Injector LR to the bridge through the grounding block. Power Module The power module provides 48-VDC power at up to 60W to the Power Injector LR, which in turn provides power to the entire bridge system.

  • Page 13: Multi-Function Mount

    Grounding Block The grounding block provides lightning provides surge protection for any charge that might build up on the Ethernet cable inner conductor. It is normally installed inline with the 75Ω dual coaxial cables at the building entrance. The following illustration shows a typical grounding block. F-type coaxial connectors Ground wire lug Multi-Function Mount...

  • Page 14: Antenna Options

    Antenna Options The following optional antennas are available for the external antenna model of the bridge: • 9-dBi omnidirectional antenna • 9.5-dBi sector antenna • 28-dBi dish antenna...
  • Page 15 The following illustration shows these antennas. 9-dBi omnidirectional antenna 28-dBi dish antenna 9.5-dBi sector antenna Note To meet regulatory restrictions, these antennas must be professionally installed.
  • Page 16 9-dBi Omnidirectional Antenna The 9-dBi omnidirectional antenna covers 360 degrees, so it can receive signals from any direction. See the Cisco Aironet 1400 Series Wireless Bridge 9-dBi Omnidirectional Antenna document that ships with the antenna (and is also on Cisco.com) for additional information.

  • Page 17: Unpacking The Bridge

    28-dBi Dish Antenna The 28-dBi dish antenna provides a highly directional pattern that results in extended ranges between devices. See the Cisco Aironet 1400 Series Wireless Bridge 28-dBi Dish Antenna document that ships with the antenna (and is available on Cisco.com) for additional information.

  • Page 18: Installing The Bridge

    Mast top (tall mast) • Tower Note Each of these installation types requires different approaches to the installation process. These approaches are described in detail in the Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions that shipped with your bridge.
  • Page 19 The following illustration shows how the bridge components are connected in a typical installation. Integrated Building entrance external antenna Indoor Outdoor Category 5 Ethernet cable Power Grounding Bridge LAN network injector block Dual-coax Dual-coax cables cables Power module Ground (see note) Note Ground wires must comply with Sections 810 and 820 of the National Electrical Code and Section 54 of the Canadian Electrical...
  • Page 20 Caution To ensure correct installation and grounding, install the bridge in compliance with your local and national electrical codes: National Fire Protection Association (NFPA) 70, National Electrical Code (U.S.); Canadian Electrical Code, Part 1, CSA 22.1 (Canada). If local or national electrical codes are not available, refer to IEC 364, Part 1 through Part 7 (other countries).

  • Page 21: Conducting A Site Survey

    Use this data to install and initially align the bridge’s antennas and establish an efficient radio link. Contact your Cisco representative for additional information about site surveys. Installing and Linking the Bridges...
  • Page 22 The process is described in detail in the Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions that shipped with your bridge. When powered up the first time, the bridge searches for a DHCP server. If it finds one, the bridge uses the assigned address.

  • Page 23: Aligning The Antennas

    To verify the alignment and make finer adjustments, you can connect a voltmeter to the bridge’s RSSI voltage port. The port provides a DC voltage proportional to the received RF signal level. Panning and tilting the antenna through the signal path produces varying voltage readings. The maximum voltmeter reading (peak) indicates the optimum antenna position.
  • Page 24 4. Position the non-root bridge’s antenna to the azimuth, elevation, and polarization recommended by the site survey. If the site survey data is correct, the two antennas are pointed towards each other close to the line-of-site signal path. 5. Power up the non-root bridge. 6.

  • Page 25: Configuring The Bridge

    GUI and shows you how to access its Express Setup page and perform an initial configuration. The entire configuration process using the GUI is described in the Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. Advanced configuration information and using the CLI to issue IOS commands are...
  • Page 26 Associations page and clicking on the MAC address of the non-root bridge. 3. Enter the case-sensitive username Cisco and press the Tab key to advance to the Password field. 4. Enter the case-sensitive password Cisco and press Enter. The Home: Summary Status page appears.
  • Page 27 6. Enter the configuration settings for your network provided by your network administrator. The window’s configurable settings are identified and described briefly below. System Name—The system name provides an identifier for the bridge. The default system name is Bridge.
  • Page 28 10.0.0.1. Use this setting to assign or change the bridge’s IP address. Use the IP setup utility (IPSU) to determine the IP address if it was assigned by a DHCP server. See Chapter 4 of the Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide.
  • Page 29 Radio Service Set ID (SSID)—Enter the case-sensitive SSID. The SSID is a unique identifier that makes the bridge part of a specific wireless network. When the bridge is powered up for the first time, its default SSID is autoinstall. After a static IP address is assigned or the role in the radio network is changed from Install-Mode, the default SSID is tsunami.

  • Page 30: Safety Information

    The express setup puts the bridge on the network but will probably require additional configuring to conform with your network’s operational and security requirements. Consult the Cisco Aironet 1400 Series Wireless Bridge Software Configuration Guide or the Cisco Aironet Access Points and Bridges Running Cisco IOS Command Reference to obtain the information needed to complete the configuration.
  • Page 31 Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide will result in user exposure that is substantially below the FCC recommended limits. • Do not operate the radio or attempt to transmit data unless the antenna is connected;...
  • Page 32 Warning Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits, as they may cause serious injury or death.
  • Page 33 Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.

  • Page 34: Compliance Information

    Compliance Information This type-accepted equipment is designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed in accordance with the instruction manual, may cause harmful interference to radio communications.

Table of Contents