After Replacing The Analog Processor Pcb; Removing The Power Supply Pcb - Canon iR1600 Series Service Manual

Hide thumbs Also See for iR1600 Series:

Table of Contents

6.5.8 After Replacing the Analog Processor PCB

Go through the instructions given for the replacement of the analog processor PCB in

2.3.6 of Chapter13.

1) Remove the right cover.

2) Disconnect the 4 connectors [1] and the

flexible cable [2] from the power supply

3) Remove the 7 screws [3] from the

power supply PCB, and detach the

power supply PCB [4].

• If equipped with the core [5].

(difference from models)

When fitting the flexible cable

[2], make sure that it is laid as

shown in relation to the core

[5]; then, fit the 2 clips [6] in

front and at back of the core [5]

(by reversing left and right) to

secure the core [5] in place.

CHAPTER 8 EXTERNALS AND AUXILIARY CONTROL SYSTEM

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

Show Quick Links

Table of Contents

Ir2010 series Ir2000 series Ir1610 series