Multifeeder Tray Assembly; Removing The Multifeeder Tray - Canon iR1600 Series Service Manual

Hide thumbs Also See for iR1600 Series:

Table of Contents

CHAPTER 6 PICKUP/FEDING SYSTEM

5.2 Multifeeder Tray Assembly

1) Remove the left cover.

2) Free the 2 hooks [1], and detach the

multifeeder tray [2].

After mounting the multifeeder

tray, check to make sure that

the holding plate [4] is pushed

down by the manual feed

pickup roller cam [3].

· If the holding plate is up,

push down the holding plate

and, while doing so, rotate the

manual feed pickup roller [5]

using lint-free paper (so as not

to come into direct contact

with its surface) until the hold-

ing plate is in low position (by

the manual feed roller cam).

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

Show Quick Links

Table of Contents

Ir2010 series Ir2000 series Ir1610 series