Security Configuration Menu - Cisco 7931G Administration Manual
For cisco unified communications manager 8.0 (sccp and sip)
Hide thumbs
Also See for 7931G:
- Administration manual (260 pages) ,
- User manual (120 pages) ,
- Phone manual (82 pages)
Table of Contents
Advertisement
Device Configuration Menu
Table 4-17
Ethernet Configuration Menu Options (continued)
Option
Description
Span to PC Port Indicates whether the phone forwards packets transmitted and
received on the network port to the access port.
Enable this option if an application that requires monitoring of
the phone's traffic is being run on the access port. These
applications include monitoring and recording applications
(common in call center environments) and network packet
capture tools that are used for diagnostic purposes.
Security Configuration Menu
The Security Configuration menu that you access from the Device Configuration menu displays settings
that relate to security for phone. It also provides access to the Trust List menu. This menu indicates if
the CTL or ITL file is installed on the phone.
Table 4-18
The phone also has a Security Configuration menu that you access directly from the Settings menu. For
Note
information about the security options on that menu, see
Table 4-18
Security Configuration Menu Options
Option
Description
PC Port
Indicates whether the access port on the phone is enabled
Disabled
or disabled.
Note
GARP Enabled
Indicates whether the phone learns MAC addresses from
Gratuitous Address Resolution Protocol (ARP)
responses. Disabling the phone's ability to accept
Gratuitous ARP will prevent applications that use this
mechanism to monitor and record voice streams from
working. If voice monitoring is not desired, set this
option to No (disabled).
Voice VLAN
Indicates if the phone allows a device attached to the
Enabled
access port to access the Voice VLAN:
Setting this option to No (disabled) prevents the
•
attached PC from sending and receiving data on the
Voice VLAN. This setting also prevents the PC from
receiving data sent and received by the phone.
Set this setting to Yes (enabled) if an application that
•
requires monitoring of the phone traffic is running
on the PC. These applications include monitoring
and recording applications and network
monitoring software.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
4-30
describes the options on the Security Configuration menu.
If disabled, video will not work on this phone,
even if video is enabled.
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Security Configuration Menu, page
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
4-35.
OL-20798-01
Advertisement
Table of Contents
Troubleshooting
