Network Configuration Menu - Cisco 7931G Administration Manual
For cisco unified communications manager 8.0 (sccp and sip)
Hide thumbs
Also See for 7931G:
- Administration manual (260 pages) ,
- User manual (120 pages) ,
- Phone manual (82 pages)
Table of Contents
Advertisement
Network Configuration Menu
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a variety of network
settings. Tables 4-2,
change them.
For information about how to access the Network Configuration menu, see
Menu, page
Before you can change an option on this menu, you must unlock options as described in
Locking Options, page
appear only if options are unlocked.
For information about the keys you can use to edit options, see
The phone also has a Network Configuration menu that you access from the Device Configuration menu.
Note
For information about the options on that menu, see
Table 4-2
Network Configuration Menu Options
Option
Description
IPv4 Configuration Internet Protocol v4 address menu. In the IPv4 Configuration menu,
you can do the following:
•
•
For more information on the IPv4 address fields, see the specific
fields within this table.
IPv6 Configuration Internet Protocol v6 address menu. In the IPv6 Configuration menu,
you can do the following:
•
•
For more information on the IPv6 address fields, see
For more information on SLAAC, see
Communications Networks with Cisco Unified Communications
Manager
MAC Address
Unique Media Access Control (MAC) address of the phone.
Host Name
Unique host name that the DHCP server assigned to the phone.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
4-6
4-3
and
4-4
4-2.
4-3. The Edit, Yes, or No softkeys for changing network configuration options
Enable or disable the phone to use the IPv4 address that is
assigned by the IPv4 DHCP server.
Manually set the IPv4 Address, Subnet Mask, Default Routers,
DNSv4 Server, and Alternate TFTP servers for IPv4.
Enable or disable the phone to use the IPv6 address that is assign
by the DHCPv6 server or to use the IPv6 address that it acquires
through Stateless Address Autoconfiguration (SLAAC).
Manually set the IPv6 Address, Subnet Prefix Length, Default
Routers, DNSv6 Server, and IPv6 TFTP servers.
7.1(x).
Chapter 4
describe these options and, where applicable, explain how to
Network Configuration Menu, page
Table
Deploying IPv6 in Unified
Configuring Settings on the Cisco Unified IP Phone
Displaying a Configuration
Editing Values, page
4-4.
To Change
Unlock network
1.
configuration options.
Scroll to IPv4 Configuration
2.
and press the Select softkey.
1.
Unlock network
configuration options.
2.
Scroll to IPv6 Configuration
and press the Select softkey.
4-4.
Display only—Cannot
configure.
Display only—Cannot
configure.
Unlocking and
4-32.
OL-20798-01
Advertisement
Table of Contents
Troubleshooting
