English d) Remove any adjusting key or wrench before GENERAL SAFETY RULES turning the power tool on. A wrench or a key left attached to a rotating part WARNING! of the power tool may result in personal injury. Read all instructions e) Do not overreach.
13. Be careful those around one while operating. 6. Keep away from a revolving depressed center wheel. SPECIFICATIONS Model PDA-100D G10SB1 Voltage (by areas)* (100 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V) Power Input*...
English Accordingly, its range of applications cover a wide 3. Power switch variety, proving to be most suitable for heavy grinding Ensure that the power switch is in the OFF position. If of general steel materials. Since the wheel grain size the plug is connected to a receptacle while the power is rather coarse, creating a fi...
Repair, modifi cation and inspection of Hitachi Power 2. Mounting the Diamond Wheel Tools must be carried out by a Hitachi Authorized Service CAUTION Center. When utilizing the diamond wheel, pay particular attention This Parts List will be helpful if presented with the tool to to the following points.