Table of Contents
Advertisement
Chapter 4
Preparing the Cisco CallManager and Octel Systems
Setting Up the Voice Mail Hunt Group
Setting Up the Voice Mail Hunt Group Using Cisco CallManager 3.1
Step 1
Step 2
Step 3
Step 4
Step 5
Table 4-2
Cisco CallManager 3.1 Voice Mail Hunt Group Settings
Field
AdvancedCallForwardHopFlag
Forward Maximum Hop Count
78-11069-03
Add each port on the DPA 7630/7610 as a Cisco 30 VIP IP Phone.
•
•
Consider adding a descriptive line to the Display field, such as voicemail.
You must configure several settings in Cisco CallManager to ensure that the voice
mail hunt group is set up properly for the DPA 7630/7610. You must configure
these settings for each Cisco CallManager system in a cluster, and you must stop
and restart Cisco CallManager after making these changes.
Refer to the instructions specific to the version of Cisco CallManager that you are
using with the DPA 7630/7610.
Follow these steps to set up the voice mail hunt group on Cisco CallManager 3.1:
From Cisco CallManager, choose Service > Service Parameters.
From the Server drop-down list box, choose a server.
From the Services list, choose Cisco CallManager.
Enter the settings described in
Click Update.
Description
Set to true.
You can specify the number of times Cisco CallManager forwards
a call before generating an error tone. The default setting is 12, but
you should set it to a number larger than the number of extensions
in the largest hunt group.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
Configuring Cisco CallManager
Table
4-2.
4-5
Advertisement
Chapters
Table of Contents
Troubleshooting
